GPU-Z 1.20 / Intel IGP / GPU & Memory Clock = 0 MHz

[Gorbush]

I have problem with wrong readings of GPU & Memory Clock on Intel HD 500 (Celeron N3450 - Apollo Lake-M) where PID equals 0x5A85. What's more strange is that when I put display to sleep then GPU Core Clock jumps from 0 to 4250 MHz periodically.
I think that might have something to do with Intel graphics drivers. I tried GPU-Z version 1.18 through 1.20. Same result.

My validation is n3zb7.

There are other accounts of similar problems on Intel IGP (HD 630) with driver version 21.20.16.xx+
https://forum.level1techs.com/uploa...7093ff402429815195f34f33dc8e40c_1_471x550.jpg
from https://forum.level1techs.com/t/intel-hd-630-is-slower-than-530/112667

Pleas try to fix it. GPU-Z is the only program which shows real power and load values for IGP.

There are also minor inconsistency at Graphic Card page like Memory type DDR4 (real DDR3) but most problematic is Shaders count which for HD 500 should be 12 EU and GPU-Z shows 18. Probably it is for Intel HD 505 GPU (PID 0x5A84) in Pentium N4200. I don't know how much ROPs TMUs there are.

Could anyone check if GPU-Z shows proper values for integrated Intel GPU with driver version 21.20.16.xx and newer?