Damn!
i dont seem to be able to post in Xtreme forums so could you pass this on, want to thank all and in particular Grnfinger,,thx guys
First time ever oc, well second considering I changed the cpu volts once! and I still cant believe it!, I only just worked out that you had to key in values for volts , thought my mobo was buggered for days,,lol,,was gonna return it then for some strange reason the right side of the bios screen caught my eye and there it was!! Key in the values , I thought they shoulda been part of a drop screen ..Dohhh
My oc specs for e6850 and maximus formula bios 907 idle 34-35 load 61-62 running stock intel heatsink…THX Grnfinger,got these from your q6600 specs and adjusted them slightly using gods help ,,,you`re awesome mate ! Hope this noob oc can be of some help to others , thx again iam stoked!...oh yeah , been running prime95 for round 3 hours no probs! I might get game and drop the cpu volts by another .025. When I ran 1.30 it was unstable , cant believe a drop of .025 would make that much of a diff, it also dropped the temp by 3c
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 9
FSB Frequency : 380
FSB Strap to North Bridge : AUTO
PCI-E Frequency: 100
DRAM Frequency: DDR2-945
DRAM Command Rate : 2T
DRAM Timing Control: Manual
CAS# Latency : 4
RAS# to CAS# Delay : 4
RAS# Precharge : 4
RAS# ActivateTime : 12
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time : AUTO
Write Recovery Time : AUTO
Read to Precharge Time : AUTO
Read to Write Delay (S/D) : AUTO
Write to Read Delay (S) : AUTO
Write to Read Delay (D) : AUTO
Read to Read Delay (S) : AUTO
Read to Read Delay (D) : AUTO
Write to Write Delay (S) : AUTO
Write to Write Delay (D) : AUTO
DRAM Static Read Control: Disabled
Ai Clock Twister : Strong
Transaction Booster : AUTO
CPU Voltage : 1.325
CPU PLL Voltage : 1.50
North Bridge Voltage : 1.49
DRAM Voltage : 2.10
FSB Termination Voltage : 1.40
South Bridge Voltage : 1.050
Loadline Calibration : Enabled
CPU GTL Reference : Auto
i dont seem to be able to post in Xtreme forums so could you pass this on, want to thank all and in particular Grnfinger,,thx guys
First time ever oc, well second considering I changed the cpu volts once! and I still cant believe it!, I only just worked out that you had to key in values for volts , thought my mobo was buggered for days,,lol,,was gonna return it then for some strange reason the right side of the bios screen caught my eye and there it was!! Key in the values , I thought they shoulda been part of a drop screen ..Dohhh
My oc specs for e6850 and maximus formula bios 907 idle 34-35 load 61-62 running stock intel heatsink…THX Grnfinger,got these from your q6600 specs and adjusted them slightly using gods help ,,,you`re awesome mate ! Hope this noob oc can be of some help to others , thx again iam stoked!...oh yeah , been running prime95 for round 3 hours no probs! I might get game and drop the cpu volts by another .025. When I ran 1.30 it was unstable , cant believe a drop of .025 would make that much of a diff, it also dropped the temp by 3c
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 9
FSB Frequency : 380
FSB Strap to North Bridge : AUTO
PCI-E Frequency: 100
DRAM Frequency: DDR2-945
DRAM Command Rate : 2T
DRAM Timing Control: Manual
CAS# Latency : 4
RAS# to CAS# Delay : 4
RAS# Precharge : 4
RAS# ActivateTime : 12
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time : AUTO
Write Recovery Time : AUTO
Read to Precharge Time : AUTO
Read to Write Delay (S/D) : AUTO
Write to Read Delay (S) : AUTO
Write to Read Delay (D) : AUTO
Read to Read Delay (S) : AUTO
Read to Read Delay (D) : AUTO
Write to Write Delay (S) : AUTO
Write to Write Delay (D) : AUTO
DRAM Static Read Control: Disabled
Ai Clock Twister : Strong
Transaction Booster : AUTO
CPU Voltage : 1.325
CPU PLL Voltage : 1.50
North Bridge Voltage : 1.49
DRAM Voltage : 2.10
FSB Termination Voltage : 1.40
South Bridge Voltage : 1.050
Loadline Calibration : Enabled
CPU GTL Reference : Auto
