How can I check if I have 128bit r9550??

[bocky]

Again me

I have
Asus A9550/td 128Mb
Gigabyte GA7vax 8x/XP 1700+/512Mb
default 250/200 (aquamark3 #12724)
OCloced to 420/245 (aquamark3 #17765)
Cooled by factory fan.

I am in doubt about this card (my other PC is Asus A7V8X/XP 2000+/512Mb/Radeon 9100 64Mb)
And its aquamark3 score is a lot better than default settings on 9550

How can I be shure wherther this is 64bit or 128bit card
So I can find new bios.

THKS

Boris

P.S. See the other thread about Q on (R9100)

 

[HKS14]

Download ATITOOLS from this site u
can see all the info about ur card.

 

[bocky]

Yes but

Ati tool only tels me the following

Detected GPU Chip: RV350 (4153),
4 Pipelines,
128 MB

420.19 / 237.94

And the question was 64bit or 128bit

 

[HKS14]

I think u have the 64-Bit one.
here's a link
http://usa.asus.com/products/vga/a9550td/overview.htm

 

[bocky]

Thanks

I saw info on asus.com but was suprised
beceause this card can be OC to 420/250
but it still have weak results in Aquamark3
~17770 (core 420 mem 238)

Nothing else is there
This is 64bit card

Thanks

Bocky

Should I try R9600SE bios can this improve anything????

 

[ADV4NCED]

Again me

I have
Asus A9550/td 128Mb
Gigabyte GA7vax 8x/XP 1700+/512Mb
default 250/200 (aquamark3 #12724)
OCloced to 420/245 (aquamark3 #17765)
Cooled by factory fan.

I am in doubt about this card (my other PC is Asus A7V8X/XP 2000+/512Mb/Radeon 9100 64Mb)
And its aquamark3 score is a lot better than default settings on 9550

How can I be shure wherther this is 64bit or 128bit card
So I can find new bios.

THKS

Boris

P.S. See the other thread about Q on (R9100)

That is one serious Overclock! 250->420...Wont an overclock like that damage the core???

By factory fan you mean stock fan right?

 

[ati.bob]

I'm doing fine with 440MHz on the core from the default 250MHz..

 

[absolutefunk]

Funny thing, is that I think my card is a 9550 too (with a 9600 bios), and I can reach 475 on the core with stock cooling. Unfortunately my ram can only do 220.

-Brian

 

[sweeper]

You all kick my cards @$$... I can only top 400 / 290 with Zalman Heatpipe and flashed with Sapphire 9600 Pro Bios 398/230. WTF?

 

[absolutefunk]

I wish I could do 290 with my ram. I'll trade ya some core speed for ram

-Brian

 

[sweeper]

I don't understand how you are getting such high core speeds? I'd say everyone here can do atleast 420. I can't get passed 400. Not sure why my memory overclocks so high it's Hynix 4.0. You'ed think it would be a poor performer as well.

 

[ati.bob]

I wish I could do 290 with my ram. I'll trade ya some core speed for ram

-Brian

I'll second that again..

 

[Fearf]

Easy with Everest or Rivatuner.

Everest: http://www.lavalys.com/products/download.php?pid=1&lang=en&pageid=3

Rivatuner: http://download.guru3d.com/rivatuner/

Eso.

 

[bocky]

I will cool it some more but first i have to flash it with 9600 bios. And I need to find bios for it
Should I use 9600 or 9600se
128bit / 64bit

 

[sweeper]

I will cool it some more but first i have to flash it with 9600 bios. And I need to find bios for it
Should I use 9600 or 9600se
128bit / 64bit

64-Bit..... Here are the specs to YOUR card.

Graphics Controller ATI Radeon 9550
Clock/Memory Speed: 250MHz/400MHz
Memory Configuration: 128MB DDR/64-bit
Connectors: 1 x VGA(D-Sub)
1 x TV-Out(S-Video/Composite)
1 x DVI
Bus Interface: AGP 4X/8X