• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

How to reconfigure HDD from raid to normal operation?

Joined
Feb 22, 2009
Messages
786 (0.13/day)
Processor Ryzen 7 5700X3D
Motherboard Asrock B550 PG Velocita
Cooling Thermalright Silver Arrow 130
Memory G.Skill 4000 MHz DDR4 32 GB
Video Card(s) XFX Radeon RX 7800XT 16 GB
Storage Plextor PX-512M9PEGN 512 GB
Display(s) 1920x1200; 100 Hz
Case Fractal Design North XL
Audio Device(s) SSL2
Software Windows 10 Pro 22H2
Benchmark Scores i've got a shitload of them in 15 years of TPU membership
I have received a WD SE 4 TB SATA HDD. Previously it was used in a RAID1 array. Using Windows disk management i have deleted the partition, created it per new, formatted with AF sector size. CrystalDiskInfo shows health status ok, but i can not read smart with other programs like HD Tune Pro or Speccy. Every program installed in Windows shows the hard drive as "Intel Raid 1 Volume SCSI Disk Device".

What do i need to do to get rid of it's RAID1 status and have a proper naming?
 
Joined
Dec 6, 2005
Messages
10,885 (1.54/day)
Location
Manchester, NH
System Name Senile
Processor I7-4790K@4.8 GHz 24/7
Motherboard MSI Z97-G45 Gaming
Cooling Be Quiet Pure Rock Air
Memory 16GB 4x4 G.Skill CAS9 2133 Sniper
Video Card(s) GIGABYTE Vega 64
Storage Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue
Display(s) 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC*
Case Rosewill
Audio Device(s) Onboard + HD HDMI
Power Supply Corsair HX750
Mouse Logitech G5
Keyboard Corsair Strafe RGB & G610 Orion Red
Software Win 10

FordGT90Concept

"I go fast!1!11!1!"
Joined
Oct 13, 2008
Messages
26,263 (4.35/day)
Location
IA, USA
System Name BY-2021
Processor AMD Ryzen 7 5800X (65w eco profile)
Motherboard MSI B550 Gaming Plus
Cooling Scythe Mugen (rev 5)
Memory 2 x Kingston HyperX DDR4-3200 32 GiB
Video Card(s) AMD Radeon RX 7900 XT
Storage Samsung 980 Pro, Seagate Exos X20 TB 7200 RPM
Display(s) Nixeus NX-EDG274K (3840x2160@144 DP) + Samsung SyncMaster 906BW (1440x900@60 HDMI-DVI)
Case Coolermaster HAF 932 w/ USB 3.0 5.25" bay + USB 3.2 (A+C) 3.5" bay
Audio Device(s) Realtek ALC1150, Micca OriGen+
Power Supply Enermax Platimax 850w
Mouse Nixeus REVEL-X
Keyboard Tesoro Excalibur
Software Windows 10 Home 64-bit
Benchmark Scores Faster than the tortoise; slower than the hare.
Remove it from the RAID1 then KillDisk it. The RAID config data are in the first bytes of the drive...outside the reach of Windows.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,473 (4.01/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
I've always just been able to do a Clean command on the disk in DiskPart and it gets rid of the RAID config.
 
D

Deleted member 67555

Guest
On boot up go into your RAID options and delete the HDD from the array.

If you have it on a system without RAID enabled unplug the other drives and then set it up as if you're going to run RAID in the bios then go into RAID and delete it from the array.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
44,274 (6.80/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Remove it from the RAID1 then KillDisk it. The RAID config data are in the first bytes of the drive...outside the reach of Windows.

I tried Killdisk recently, I'm unsure if I had caddies or what but when I would run it, it would never move beyond the main menu after hitting correct key on board to start it...
 
Joined
Oct 24, 2004
Messages
1,294 (0.17/day)
I've always just been able to do a Clean command on the disk in DiskPart and it gets rid of the RAID config.

This.

From an elevated prompt:

diskpart

then

list disk
sel disk X (where X is the drive number of your WD SE 4TB)
clean
create part prim
sel part 1
format fs=ntfs quick
assign
exit
 
Joined
Jan 17, 2010
Messages
12,340 (2.21/day)
Location
Oregon
System Name Juliette // My HTPC
Processor Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling Noctua NH-U12 Black // Stock
Memory Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s) ASUS RTX4070 OC// ASUS RTX 4060 OC
Storage Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s) ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s) Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse G903 and a Master Mouse MM710/No mouse, MS game copntroller
Keyboard EVGA / Logitech K400
Software Windows 11 Pro // Windows 10 Pro
Diskpart like he said
 
Joined
Feb 22, 2009
Messages
786 (0.13/day)
Processor Ryzen 7 5700X3D
Motherboard Asrock B550 PG Velocita
Cooling Thermalright Silver Arrow 130
Memory G.Skill 4000 MHz DDR4 32 GB
Video Card(s) XFX Radeon RX 7800XT 16 GB
Storage Plextor PX-512M9PEGN 512 GB
Display(s) 1920x1200; 100 Hz
Case Fractal Design North XL
Audio Device(s) SSL2
Software Windows 10 Pro 22H2
Benchmark Scores i've got a shitload of them in 15 years of TPU membership
On boot up go into your RAID options and delete the HDD from the array.

If you have it on a system without RAID enabled unplug the other drives and then set it up as if you're going to run RAID in the bios then go into RAID and delete it from the array.

That was the correct option! I knew i could somehow fix this from UEFI. And so i did.

Remove it from the RAID1 then KillDisk it. The RAID config data are in the first bytes of the drive...outside the reach of Windows.

If it is possible, i try to avoid installing any additional software.

I've always just been able to do a Clean command on the disk in DiskPart and it gets rid of the RAID config.

A then, perhaps next time.

Thank you all.
 
Top