- Joined
- Oct 9, 2007
- Messages
- 47,863 (7.38/day)
- Location
- Dublin, Ireland
| System Name | RBMK-1000 |
|---|---|
| Processor | AMD Ryzen 7 5700G |
| Motherboard | Gigabyte B550 AORUS Elite V2 |
| Cooling | DeepCool Gammax L240 V2 |
| Memory | 2x 16GB DDR4-3200 |
| Video Card(s) | Galax RTX 4070 Ti EX |
| Storage | Samsung 990 1TB |
| Display(s) | BenQ 1440p 60 Hz 27-inch |
| Case | Corsair Carbide 100R |
| Audio Device(s) | ASUS SupremeFX S1220A |
| Power Supply | Cooler Master MWE Gold 650W |
| Mouse | ASUS ROG Strix Impact |
| Keyboard | Gamdias Hermes E2 |
| Software | Windows 11 Pro |
Intel announced that it started mass-production of PCI-Express SSDs for data-centers that implement the latest-generation 3D QLC NAND flash memory. The new QLC (4 bits per cell) NAND flash memory enables 33% increases in densities over TLC NAND flash, and with 3D (stacks), the density per chip is further multiplied. Built in the 15 mm-thick 2.5-inch form-factor with U.2 interface, the drive is built for the rigors of "warm storage" (data that isn't hot, but isn't cold/archival, either). Such drives can be slower than "hot data" drives based on faster MLC or even SLC NAND flash, but almost always up; and faster than HDDs. The first 3D QLC NAND-based SSD, which probably uses the same chips as this drive, is the Micron 5210 ION, which was launched in May.
View at TechPowerUp Main Site
View at TechPowerUp Main Site
