- Joined
- Jan 4, 2022
- Messages
- 28 (0.02/day)
- Location
- Contrite, California
System Name | MiGHTY_MOUSE.final.03 |
---|---|
Processor | 11900 |
Motherboard | z590i-UNIFY |
Cooling | Thermalright SI-100 Black |
Memory | G-Skill Trident 32GB |
Video Card(s) | 3060 XC (GA106LHR) |
Storage | Solidigm P41Plus 1TB / 870 QVO 4TB / Exos 20TB |
Display(s) | UltraGear 32GP750-B |
Case | Phantom Powerboard v5.1 |
Audio Device(s) | M-Audio EX-66 |
Power Supply | SuperNOVA-G6-650 |
Mouse | X20 |
Keyboard | Z15 |
Benchmark Scores | http://www.3dmark.com/spy/41592414 |
Hello;
I'm the original owner of this laptop and recently found it tucked away in storage...
https://www.newegg.com/black-samsung-series-7-np700g7c-s01us/p/N82E16834131270?Item=N82E16834131270
All's well with it, but my urge to tweak kicked in upon finding it. I swapped out the HDDs with a some SSDs. Now I'm curious if the CPU/GPU could be swapped? I have never swapped out a laptop CPU/GPU before so I'm seek any guidance in relation to whether or not this Socket/Board could accept say an i7 3940XM EE? I realize that most chips are in fact soldered into the boards. I've scoured the www to no avail on this particular board/product, (but it is Samsung circa 2012). How would I be able to find that out? and if so, IS re-soldering the swap even an option?
Thank you muchly in advance to any light
I'm the original owner of this laptop and recently found it tucked away in storage...
https://www.newegg.com/black-samsung-series-7-np700g7c-s01us/p/N82E16834131270?Item=N82E16834131270
All's well with it, but my urge to tweak kicked in upon finding it. I swapped out the HDDs with a some SSDs. Now I'm curious if the CPU/GPU could be swapped? I have never swapped out a laptop CPU/GPU before so I'm seek any guidance in relation to whether or not this Socket/Board could accept say an i7 3940XM EE? I realize that most chips are in fact soldered into the boards. I've scoured the www to no avail on this particular board/product, (but it is Samsung circa 2012). How would I be able to find that out? and if so, IS re-soldering the swap even an option?
Thank you muchly in advance to any light
