Maximus Formuls to Rampage mod!!!

[vivanco]

thanks to all i just did the mod, everything went well
special thanks to Nitro-Max for giving me the link to Afudos
now here comes the testing, will post results

 

[Frogger]

about 1.424v and my reset button would hang my system . It isn't so much the voltage went down as my truely stable clock went up about 250 mghz now example (reset button functioning if pressed during prime), and is not hanging.

Thks for this info [should have read the X thread 1st] but Tpu is the home page on this rig so.... new thread to follow part 2 @ X http://www.xtremesystems.org/forums/showthread.php?t=184372

 

[Nitro-Max]

glad it went ok for you guys give the bios time though theres alot to play with and its about time the flashing method got updated since they found the engineers version of AFUDOS its alot more simple thanks for the post Frogger.

 

[trt740]

this R/F bios will allow my board to boot with a 560+ FSB.

 

[rangerone766]

just clicked the button over at transcend.com on some axeram 1200's, wish i had bought some while they were at the egg for a few dollars cheaper. but my crucial lanfest were still alive then. i hope to be able to run these at 1200. all you guys with these axe's and the maximus be prepared to help me out later this week, because i can read and set the settings, but i have no idea what those settings actually do. lolz

i do know that before i killed my registry with too aggressive ram settings on Saturday with the rampage, i was able to get into windows and run a few superpi runs at just under 4.1ghz on my quad. I'll by tickled pink if i can achieve a 3.8 or 3.9 24/7 oc on my quad with these axerams. my vid is 1.275 on my quad not great but at 4.05ghz with 1.59volt it will run benches, i am sure its not stable at those speeds. temps run a bit high up there, about 59-62c on core0 and core1 but core2 and 3 always run about 8-10c less at full load. maybe a triple fan rad is in the future for me. hehehe

keep an eye on my for sale thread in a week or 2. i have 4gigs of whatever crucial replaces my lanfest with, and a xfx 8800gs coming up for sale soon.

 

[Nitro-Max]

interesting my vids 1.275v too i run 3.6ghz stable on 1.360v after vdroop. what do you need for 3.6ghz?

 

[erocker]

just clicked the button over at transcend.com on some axeram 1200's, wish i had bought some while they were at the egg for a few dollars cheaper. but my crucial lanfest were still alive then. i hope to be able to run these at 1200. all you guys with these axe's and the maximus be prepared to help me out later this week, because i can read and set the settings, but i have no idea what those settings actually do. lolz

i do know that before i killed my registry with too aggressive ram settings on Saturday with the rampage, i was able to get into windows and run a few superpi runs at just under 4.1ghz on my quad. I'll by tickled pink if i can achieve a 3.8 or 3.9 24/7 oc on my quad with these axerams. my vid is 1.275 on my quad not great but at 4.05ghz with 1.59volt it will run benches, i am sure its not stable at those speeds. temps run a bit high up there, about 59-62c on core0 and core1 but core2 and 3 always run about 8-10c less at full load. maybe a triple fan rad is in the future for me. hehehe

keep an eye on my for sale thread in a week or 2. i have 4gigs of whatever crucial replaces my lanfest with, and a xfx 8800gs coming up for sale soon.

Run my axes at 5 5-5-15 1200mhz @ 2.19V's (set at 2.08V in bios with loadline callibration Enabled), everything else memroy related set to AUTO. Memtest 100% no errors.

 

[trt740]

trying to get this stable now

this R/F bios will allow my board to boot with a 560+ FSB.

 

[rangerone766]

interesting my vids 1.275v too i run 3.6ghz stable on 1.360v after vdroop. what do you need for 3.6ghz?

1.4ish but i never messed around trying to lower it any i found stable at 3.6 and went for it. as i said, aside from voltages and changing fsb speeds i am pretty much a noob. i used the anandtech settings for 455x8 for 3.6 and a bit more voltage than them.

 

[Frogger]

New Rampage Bio showing faster boot times...Enjoy
http://rapidshare.com/files/107481955/RF0308.rar

 

[Nitro-Max]

Thanks m8 just flashed to 0308 things went fine running stable.

 

[ZenEffect]

you guys should really just watch the xs thread... we are days ahead

not poking fun or anything, just alot more information is to be had over there than here. look @ kups maximus/rampage thread on the intel section... 173 pages of information, tweaking and testing.

http://www.xtremesystems.org/forums/showthread.php?t=179580

everything you need to know

oh and your welcome for the afudos

*edit*

also, as a voucher to the rampage's bios greatness on a maximus...

not stable... but i couldnt even come close to booting that as a maximus.

 

[trt740]

you really need to read a thread first before you post

you guys should really just watch the xs thread... we are days ahead

not poking fun or anything, just alot more information is to be had over there than here. look @ kups maximus/rampage thread on the intel section... 173 pages of information, tweaking and testing.

http://www.xtremesystems.org/forums/showthread.php?t=179580

everything you need to know

oh and your welcome for the afudos

*edit*

also, as a voucher to the rampage's bios greatness on a maximus...

not stable... but i couldnt even come close to booting that as a maximus.

that link is already posted

 

[rangerone766]

now i'm pissed with transcend. ordered my 1200mhz axerams on monday morning with 3 day shipping. well the scheduled delivery date is monday the 21st. according to my math that is 7 days shipping. thats more than twice the shipping time they quote on thier web page. arghh

 

[Tatty_Two]

now i'm pissed with transcend. ordered my 1200mhz axerams on monday morning with 3 day shipping. well the scheduled delivery date is monday the 21st. according to my math that is 7 days shipping. thats more than twice the shipping time they quote on thier web page. arghh

5 days shipping....it's calculated in business days I beleive.....but it still stinks!