MSI Z890 Tomahawk EZ DIGI-DEBUG LED Settings

[BerArtVD]

Hi,

Does someone know if there are EZ DIGI-DEBUG LED Settings on the MSI Z890 Tomahawk?
Now it shows the system of processor temperature.
I read that it also can show error codes (if there is an error)
The name of this LED is not for nothing: EZ-DIGI-DEBUG-LED
I cannot find this setting anywhere, not in the BIOS not in MSI-Center.
I run on the A4 Bios. (so not YET on the A5)

Thx in advance,

//EDIT: Or is it so that it is both true, and the Temperature and IF there is an error it wil show a code?

 

[sneekypeet]

They way my Asus works is it is a debug LED while attempting POST. If you have an issue, it will show the debug code. Once it hands off to Windows, the debug 99 changes to CPU temperature. I only have the option to turn it off I believe.

 

[BerArtVD]

I double checked with your remark, and I also have only the option to turn it on or off, thx @sneekypeet

 

[ir_cow]

If it's past boot and in windows that is the temperature. Put it under load and watch it go to 70~ in real-time

 

[BerArtVD]

I just read on the MSI forum (https://forum-en.msi.com/index.php?...led-on-msi-z890-tomahawk.406716/#post-2303199) that I was not alone, another user did see nothing in there EZ DIGI-DEBUG LED display. Maybe the update to 24H2 did the trick ...

If it's past boot and in windows that is the temperature. Put it under load and watch it go to 70~ in real-time

I did and you are right, it did go up to 70 and I also see codes while booting ...