• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Noob!!! Need Help Overclocking

H

Hero*

New Member
Joined
Jan 10, 2005
Messages
21 (0.00/day)
I am a complet NOOBIE when it comes to computer!!! :o

I recently purchased a custam box. I have a intel pentium 4 preccesor 3.0 ghz, a p4p 800 se AI series mother board, 518mb ddr ram, and a ATI radeon 9800 pro 126 mb. I am happy with the over all preformance with my whole system but on some games it gets a bit laggy. So i want to over clock my video card. But the only problem is that I HAVE NO CLUE HOW!!! If some one could PLZ tell me step by step how to do this and what other things i might need to O/C my video card that wuld be wonderful!!!

PS sorry bout spelling :o
 
Go download atitool from this website.
Push the find max core button, leave it, once it is completed remember the number it outputer, then set it back to defult push the find max memory button.
Once both of these are completed set both the core and memory to those values and create a new profile, save it, go into settings and set atitool to load with windows and set the load profile to the one you created with the new clocks.
 
Do I need more cooling?

Hey man thanks... But will i need to get more cooling for my computer if i O/C? Could i kill my computer by doing this?
 
if you're worried about killing ur computer then don't do it, it's an accepted risk when you overclock. you may need more cooling and you CAN kill your video card doing it.
 
I have no choice!

Ya but i want my games to run more smoothly!!! And i have no money man!!! I blew it all on the system i have like 50 bucks max lol :o I dont know what i should do...
 
Could you tell me what kind of VGA cooler i should get?
 
Last edited:
Even though you have best fan cooler it will not get the most out its cooling capibilty unless you try improve your cpu cooling system. Installing intake and exhaust fan should do the job since you don't have enough money to purchase a new water cooling system.
 
and after u have done the find max core and max mem, set them both and then do scan for artifacts for a while, personally i do it for an hour and if none are found then it is good clock speeds, and it can kill ur vid card but only if u go stupid on it, with ati tool there is still a risk of damage but it is fairly low i feel as it backs off when it starts to detect artifacts (signs of overheating).

Also u have a very good card anyway and even with out being overclocked it should run most games very smoothly, try turning down the resolution and the anisotropic filtering and the anti aliasing first, will help with the fps, (any resolution over 1280 x 1024 u dont even need anti alias or the filtering as it makes very little diff i beleive) and if they r still un acceptable then u resort to overclocking, but yeah as that dude above says just let ati tool do its thing and u should be all right, wizzard has a done a very good job with it :D he gets three thumbs up from me lol

ps hope i havent confused u too much with my rambling :P
 
oh and another thing u may need to turn off the anti alias and that thru the control panel, so right click on the desktop. click the settings tab and then click on the advanced tab and search the options in there, or if u cant find it then they are definantly in the catalist control centre, open the catalist control centre (u get that when u install the drivers for the vid card) and look through the performance options there,
 
Hey TY all very much I am going to O/C very soon :D Im just ordereing the Arctic VGA cooler rev 3 :D As soon as it is in I will O/C :D

Thank you all very much for all of youre help :)
 
Last edited:
Umm... the silencer 3 is made for the 256meg version of the card, i.e. the card with the 9800XT pcb, this means that it may not fit totally onto your video card. Its no real problem just hope you got nothing against using hacksaws like i did :p . Also you might wana, instead of trying to make the fan connecter into a 2-pin plug, just plug it into a motherboard header and monitor it from there :D .
 
I dont understand how your games get laggy with that mashine. U tried to add more ram? Because my system doesnt lagg at all and i have 2 times slower graphic card than yours.(when i overclock it)
 
K ARG!!!!! :confused: What chip set cooler should i get??? I was just going to go in and order it tommorow but now that u have told me this i dont think i am i need to get on that is made for my video card (ATI radeon 9800 pro 128 mb) I need sugestions!!! PLZ i want to O/C ASAP.

Mostly the game that gets laggy is star wars Knights of the old republic V 1.3 on medion and low screen resolution. But this happens when i am out in opemn field not when im inside buildings... :(

One more thing can some one PLZ tell my how i could monitor my cards temp plz!!! beacuse ATItool does not support it!!! IM SO MAD :mad: I should of spent 50 more buc ks and bought XT lol...

PLZ answer me ASAP :confused: :( :confused: :(
 
The ati silencer 1 or the vga cooler rev. 3 they will both fit fine :)
 
:mad: K i was just reading a review...and it said taht teh arctic cooler rev 3 only fits on XT's will it fit on my ATI radeon 9800 pro 128mb :mad: ???
 
Not without modification, if you dont mind attacking it with a hacksaw or a dremel then it will fit.
 
Schpeedy said:
The ati silencer 1 or the vga cooler rev. 3 they will both fit fine :)
Click to expand...
The artic cooling ATI SILENCER 3 will not fit on without modification the vga cooler rev. 3 will fit.
 
ReconCX said:
if you're worried about killing ur computer then don't do it, it's an accepted risk when you overclock. you may need more cooling and you CAN kill your video card doing it.
Click to expand...

how much is the risk of blowing up the card if you do it using ATI Tool? Is it more reliable if you're doing it manually and do go mad on it?
 
Hey guys i just got my arctic cooler in!!! :D Im SOOO happy. Im gonna instal it on friday!!! and O/C on friday k ty for all of youre help.

Hero*
 
sounds like you need more ram in your PC m8 :) an OC on your vid card wont help smooth things out...

I had a 9800 pro and a 3.0E... beleive me a 9800 @ stock is still a VERY fast card.... I too started with only 512MB RAM..... within a week I put another 512 in. :)

Also - when you put the Arctic cooler in, check the GPU core - if it is an R360, you are laughing - they can be flashed to XT bios (higher stock speed of 412/365 amongst other goodies)
 
Man i instaled the Arctic cooler wit no problems :D I have a R350 core though.... :( so it is point less to flash to XT for me :( :mad: LOL i havet O/C my video card yet LOL I dont get how u do it LOL im a RETARD ROFL could some one tell me how to plz but step by step and explain what happens in each one... Ohhh and im getting a SWEEET temp monitoring and fan controler here take a look: http://www.directron.com/aldv02uk.html :D

P.S. Hey my VGA cooler does not blow taht much air out... is taht normal?
 
Yea, It wont blow loads of air but dont worry too much about it! ;)

ASM1 is correct, you need more Ram. When I ran 512mb ram Far Cry defaults would be all set on High but since I only had 512 Ram I had to play on Medium settings. Now that I got my extra ram, I've put everything on high aswell as some on Very High. Install Fraps and check your FPS during games, this will determine whether or not its your card thats slowing up your games. Low FPS means your card isn't running smoothly, but if your getting high FPS, then its definetly your ram!
 
You must log in or register to reply here.
Back
Top