jimbo
New Member
- Joined
- Nov 25, 2008
- Messages
- 20 (0.00/day)
| System Name | Intel |
|---|---|
| Processor | Intel Duo 2 Core E8500 @3.16mhz |
| Motherboard | Gigabyte P45-DS4P |
| Cooling | front, rear, side fans |
| Memory | 2x2 gb Kingston DDR2 |
| Video Card(s) | Nvidia GTX260 896mb |
| Storage | W.D 500 gb |
| Power Supply | seasonic 650watt |
| Software | Windows XP 32bit sp3 |
Gday, hope every1 had a good chrismas. I got a problem with the new system. Its only been a month and i already got a bluescreen error then auto reboot... i browse around, did some system checks havent specifically got an insight in what the problem is. I also notice under device manager that the
6to4 network adapter is not working(exclaimation mark).
Ran GPU-Z, core temp and rivatuner for temp check and notice the temps are much higher than when i first put the system together with XP (im now using vista).
before the gpu-z was running in the mid 30*C ,now its at high 40s for the GPU temp. The PCB temp use to be around 30s, now mid 40s.
are these teperatures normal?
Also, i tried to run atitool which i did could before but not anymore. I get an error that says "the kernel mode does not seem to be running".
Sorry bout the long rant, im a noob so any advise would be helpfull. Thanks all for reading.
6to4 network adapter is not working(exclaimation mark).
Ran GPU-Z, core temp and rivatuner for temp check and notice the temps are much higher than when i first put the system together with XP (im now using vista).
before the gpu-z was running in the mid 30*C ,now its at high 40s for the GPU temp. The PCB temp use to be around 30s, now mid 40s.
are these teperatures normal?
Also, i tried to run atitool which i did could before but not anymore. I get an error that says "the kernel mode does not seem to be running".
Sorry bout the long rant, im a noob so any advise would be helpfull. Thanks all for reading.
