NVIDIA NVFlash with Board Id Mismatch Disabled help needed

[BATZEN1981]

SO, I have a evga 2070 xc ultra with bricked eeprom

i was wondering if anyone have a same card they can download the

NVIDIA NVFlash with Board Id Mismatch Disabled files​

and run command nvflash64 -a to see your card and select it like it would say or start with <0> for 0 device

the after for example put 0 as the device like this

nvflash64.exe --index=0 --protectoff

to disable the id protection then use gpu-z to send me that bios file

so i can just program my bricked gpu as the same and see if that boots like that

ill be using the rt809f wich reads it just fine and write to ti with protect off file

then ofcourse if you dont want to you can always use command nvflash.exe --index=0 --protecton

you can download the latest nvflash here

NVIDIA NVFlash with Board Id Mismatch Disabled v5.590.0 Download

This is a patched version of NVIDIA's NVFlash. On Turing cards, NVFlash no longer allows overriding of the "board ID mismatch" message through comm

www.techpowerup.com

and ofcourse gpu-z from here

TechPowerUp

GPU-Z is a lightweight system utility designed to provide vital information about your video card and graphics processor.

www.techpowerup.com