Nvidia Surround Setup, the plant PhysX GPU, after my tricks was the CPU

[Darmidonov]

Hello I do not know what to do, I wanted to cheat pulled the video card AORUS GeForce® GTX 1080Ti Xtreme Edition 11G, insert the wire in the display port on the Asus Maximus VIII Hero motherboard reset windose 10 about then updated video driver Processor Intel Core i7- By 7700 Kaby Lake, Intel (R) HD Graphics 630, after the BIOS for Shoal force including integrated video card, press F10 BIOS reboot, shut down the computer, insert a video card AORUS GeForce® GTX 1080Ti Xtreme Edition has disabled the Internet, then the latest version of the driver has been downloaded to a flash drive and this (the time is not clear) for installation, etc. Ayvera video card AORUS GeForce® GTX 1080Ti Xtreme Editio in Device Manager was two, 1 video card is integrated, 2 discrete (but most importantly in the Nvidia control panel setting Surround, PhysX used to be so 1 Auto recommended 2 GeForce GTX 1080 Ti, and the third The default should be (WTP) !!!! After my STEALTH became like that in the Surround settings, PhysX !!! 1 Auto recommended 2 GeForce GTX 1080Ti and the third was the __ (CPU) __ and should be the default (factory) __ (GP) __ !!! I again blew system clearing the BIOS put in discrete form card, connect a network cable, reset windose, in Device Manager, only one video card sees the system GeForce GTX 1080Ti but to set Surround, PhysX is not selected the third (lower) paragraph __ (GP) __ left __ (CPU) __ !!! How to fix to return all settings Surround, PhysX to the factory to the lower term was __ (GP) __

 

[Toothless]

Can you PLEASE separate your wall of text to make it easier to read? All I got was you messed up the PhysX options when trying to run surround and a wire somewhere.

 

[AlienIsGOD]

Hello I do not know what to do, I wanted to cheat pulled the video card AORUS GeForce® GTX 1080Ti Xtreme Edition 11G, insert the wire in the display port on the Asus Maximus VIII Hero motherboard reset windose 10 about then updated video driver Processor Intel Core i7- By 7700 Kaby Lake, Intel (R) HD Graphics 630, after the BIOS for Shoal force including integrated video card, press F10 BIOS reboot, shut down the computer, insert a video card AORUS GeForce® GTX 1080Ti Xtreme Edition has disabled the Internet, then the latest version of the driver has been downloaded to a flash drive and this (the time is not clear) for installation, etc. Ayvera video card AORUS GeForce® GTX 1080Ti Xtreme Editio in Device Manager was two, 1 video card is integrated, 2 discrete (but most importantly in the Nvidia control panel setting Surround, PhysX used to be so 1 Auto recommended 2 GeForce GTX 1080 Ti, and the third The default should be (WTP) !!!! After my STEALTH became like that in the Surround settings, PhysX !!! 1 Auto recommended 2 GeForce GTX 1080Ti and the third was the __ (CPU) __ and should be the default (factory) __ (GP) __ !!! I again blew system clearing the BIOS put in discrete form card, connect a network cable, reset windose, in Device Manager, only one video card sees the system GeForce GTX 1080Ti but to set Surround, PhysX is not selected the third (lower) paragraph __ (GP) __ left __ (CPU) __ !!! How to fix to return all settings Surround, PhysX to the factory to the lower term was __ (GP) __

english may not be your first language, but with the way you have worded things i have almost no clue what you are talking about.

 

[Toothless]

Okay so you want to use the iGPU on your 7700k for physx? Just keep it to the 1080TI because the iGPU can't do anything besides 720p platform games. Is your surround 1080p x 3?

 

[eidairaman1]

Don't bother with the IGPU, eithee use the CPU or the 1080, or buy another GPU for it.

 

[John Naylor]

having trouble understanding what you want to do.... do you have (1) 1080 Ti or (2) ?


1. Connect your monitor cable from the Monitor to thr GFX card not the MoBo. Ignore the IGP.

2. Install Windows after wiping storage device clean

3, Install MoBo drivers from DVD

4. Install GFX card drivers.

5. Run WU a smany times as it takes till it says no more.

6. Install MoBo / Hardware updated drivers from web site.

7. Leave nVidia control panel alone unless you have two 1080 Ti's, then enable SLI

8. i don't thing you understand what nVidia surrpound is
http://www.nvidia.com/object/3d-vision-surround-technology.html
https://www.geforce.com/hardware/technology/surround

 

[Toothless]

having trouble understanding what you want to do.... do you have (1) 1080 Ti or (2) ?


1. Connect your monitor cable from the Monitor to thr GFX card not the MoBo. Ignore the IGP.

2. Install Windows after wiping storage device clean

3, Install MoBo drivers from DVD

4. Install GFX card drivers.

5. Run WU a smany times as it takes till it says no more.

6. Install MoBo / Hardware updated drivers from web site.

7. Leave nVidia control panel alone unless you have two 1080 Ti's, then enable SLI

8. i don't thing you understand what nVidia surrpound is
http://www.nvidia.com/object/3d-vision-surround-technology.html
https://www.geforce.com/hardware/technology/surround

OP is probably trying to have physx work with surround, but having the iGPU as the dedicated device. I'm guessing he stuck a wire into the DVI slot to activate the iGPU which was dumb to do in the first place.

 

[Darmidonov]

[Цитата="Беззубик, должность: 3823618, член: 148599"]ОП, скорее всего, хочет иметь и PhysX работать с объемными, но имея игпу в качестве выделенного устройства. Я думаю, он воткнул провод в разъем DVI для активации встроенного графического ядра, которое было стремно делать в первую очередь.[/Цитата]
Hi all after reinstalling windose Pro 10 and updates the integrated video graphics and the setting in the BIOS to enable integrated graphics in the despetcher tasks was seen both videos grafice turned off the computer ,put a discrete video card 1080 on a clean Windows installed the latest driver during setup in the upper left corner was kakaeto podsachka folder and began in the configure Surround,PhysX CPU not GPU.I have a 27 " monitor ASUS ROG Swift PG27VQ

 

[Toothless]

And we're back at no one knows what's going on.

SIR WE NEED YOU TO SPEAK SLOWER AND MORE CLEARER.

 

[the54thvoid]

I think the poor guy needs a PM from a Russian speaking member or one who can read Cyrillic.

 

[Darmidonov]

[Цитата="Беззубик, должность: 3824062, член: 148599"]и мы вернулись в никто не знает, что происходит.

СЭР, НАМ НУЖНО, ЧТОБЫ ВЫ ГОВОРИТЬ МЕДЛЕННЕЕ И БОЛЕЕ ЧЕТКО.[/Цитата]
the monitor is connected via cable to the display port, but the PhysX can't fix on GP was established there CPU

 

[R-T-B]

You can't run PhysX on an integrated GPU alone.

 

[Darmidonov]

[Цитата="Р-Т-Б, должность: 3824107, член: 41983"]Вы не можете запустить PhysX от одного только интегрированных GPU.[/Цитата]
I don't use 3D , just PhysX in the settings there is no option of GP, is the option of CPU and can not seem to fix the PhysX to default as it was before CPU

 

[Toothless]

You mean for the 1080TI?

 

[BadFrog]

OP,

Can you post some pictures to help everyone see what you are looking at on your monitor? Have you tried disabling the iGPU in BIOS?

Translated with google translate
"Можете ли вы опубликовать несколько фотографий, чтобы помочь всем увидеть, что вы смотрите на свой монитор? Вы пытались отключить iGPU в BIOS?"

 

[Darmidonov]

[Цитата="BadFrog, должность: 3824146, член: 172302"]ОП

Можете ли вы опубликовать некоторые фотографии, чтобы помочь каждому увидеть то, что вы смотрите на свой монитор? Вы пробовали отключение встроенного графического ядра в BIOS?

Перевод с Google переводчик
"Можете ли вы опубликовать несколько фотографий, чтобы помочь всем увидеть, что вы смотрите на свой монитор? Вы пытались отключить игпу в биос?"[/Цитата]
Yes, the fact is that if I turn the graphics core in the BIOS in place with the graphics card odnovremenno then after reboot BIOS the computer will not boot says no signal display port, you need to reset the BIOS to restore the settings built-in graphics automatically

[Цитата="Беззубик, должность: 3824128, член: 148599"]ты имеешь в виду 1080TI?[/Цитата]
GTX 1080 Ti XTREME EDITION

[Цитата="Беззубик, должность: 3824128, член: 148599"]ты имеешь в виду 1080TI?[/Цитата]


GTX 1080 Ti XTREME EDITION

 

[Vayra86]

I think the poor guy needs a PM from a Russian speaking member or one who can read Cyrillic.

The poor guy needs a different forum IMO

When basic reading comprehension fails... soon we're gonna have someone with a bricked GPU. Already reading things about resetting BIOS...

 

[BadFrog]

The poor guy needs a different forum IMO

When basic reading comprehension fails... soon we're gonna have someone with a bricked GPU. Already reading things about resetting BIOS...

Yea its def is a challenge but still want to try and help

OP, have you tried the card on a different PC system to confirm the card is in working condition? Also what motherboard do you have? Make and model of board.

 

[Darmidonov]

[Цитата="BadFrog, должность: 3824521, член: 172302"]да, деф является проблемой, но все-таки хочу попробовать и помочь

ОП, ты пробовал карту на другом ПК, чтобы подтвердить карту в рабочее состояние? Также какая материнская плата у вас есть? Марка и модель доски.[/Цитата]
today a friend will try to reinstall the driver on the video card, the mother of Asus. Maksimus VIIE Nero

 

[Darmidonov]

having trouble understanding what you want to do.... do you have (1) 1080 Ti or (2) ?


1. Connect your monitor cable from the Monitor to thr GFX card not the MoBo. Ignore the IGP.

2. Install Windows after wiping storage device clean

3, Install MoBo drivers from DVD

4. Install GFX card drivers.

5. Run WU a smany times as it takes till it says no more.

6. Install MoBo / Hardware updated drivers from web site.

7. Leave nVidia control panel alone unless you have two 1080 Ti's, then enable SLI

8. i don't thing you understand what nVidia surrpound is
http://www.nvidia.com/object/3d-vision-surround-technology.html
https://www.geforce.com/hardware/technology/surround

yes it will be necessary to reinstall Vidnov then install the video card on the motherboard and update the driver from the DVD