- Joined
- Jun 19, 2008
- Messages
- 1,555 (0.25/day)
- Location
- Shepparton, Victoria, Australia
| System Name | Toaster! |
|---|---|
| Processor | Intel Core i7 10700KF @ 3.8/5.1GHZ |
| Motherboard | ASUS Prime Z490-P Motherboard |
| Cooling | Noctua NH-D15 CPU cooler. |
| Memory | G.Skill Trident Z RGB 64GB (4x16GB) 3600MHz CL16 DDR4 |
| Video Card(s) | ASUS ROG Strix GeForce RTX 3090 OC 24GB |
| Storage | Samsung 970 PRO M.2 NVMe SSD 1TB |
| Display(s) | Asus ROG PG43UQ 4K UHD 144Hz G-Sync HDR 43in + 2 x ASUS VG258Q FHD 144Hz Freesync 25in Monitor |
| Case | Corsair Obsidian 900D |
| Audio Device(s) | EPOS Sennheiser GSX 1000 V2 amplifier + EPOS Gaming GSP 601 Headset |
| Power Supply | Corsair AX1000 Titanium Modular |
| Mouse | Razer Deathadder |
| Keyboard | Corsair K70. |
| Software | ALL HAIL WINDOWS 10. |
| Benchmark Scores | Old system: http://www.3dmark.com/fs/6805248 |
Ok I recently got my brand new Viewsonic VX2753MH 27 inch 1ms LED LCD Monitor.
But the screen isn't adjusted. And won't allow auto/manual adjusting. The overscan has to be set @ 10 percent for it to fill the borders, but even then the picture is still blurry
It's on a DVI to HMDI adapter and my 7970 only has the 1 HDMI slot and 2 MiniDP slots + DVI slot, I tried a MiniDP to HMDI adapter but that didn't work also. The driver is installed also.
But the screen isn't adjusted. And won't allow auto/manual adjusting. The overscan has to be set @ 10 percent for it to fill the borders, but even then the picture is still blurry
It's on a DVI to HMDI adapter and my 7970 only has the 1 HDMI slot and 2 MiniDP slots + DVI slot, I tried a MiniDP to HMDI adapter but that didn't work also. The driver is installed also.
