• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

XFX 580 flash from Mining VBIOS to Retail BIOS , any help

Joined
Jan 12, 2022
Messages
25 (0.02/day)
So I acquired an ex mining RX580 on Evilbook marketplace (XFX AMD Radeon™ RX 580 GTS XXX Edition 8GB ) , seller got it as a job lot untested, it may be damaged ,as not known if working but cheap enough for me to gamble on . I thought I would try to bring it back to gaming use, I have done flashing before with different generations of GPU with a fair amount of success

Anyhow when I tried a bootable dos ATI flash , I got a 'No GPU found' or similar message .

So I decided to boot into windows using my APU, the card is detected here as RX580 . I ran the amdvbflash and tried to load this ROM here (one of three) and a few others using the 'xxx' variant label . Though this allways fails (as shown below) due to the following P/N mismatch

1641955007333.png

I tried the GUI version and get the same P/N mismatch
1641955172487.png


For the record , here is the GPU-Z info
1641956900686.png





Any suggestion appreciated .

Thanks
 
So I acquired an ex mining RX580 on Evilbook marketplace (XFX AMD Radeon™ RX 580 GTS XXX Edition 8GB ) , seller got it as a job lot untested, it may be damaged ,as not known if working but cheap enough for me to gamble on . I thought I would try to bring it back to gaming use, I have done flashing before with different generations of GPU with a fair amount of success

Anyhow when I tried a bootable dos ATI flash , I got a 'No GPU found' or similar message .

So I decided to boot into windows using my APU, the card is detected here as RX580 . I ran the amdvbflash and tried to load this ROM here (one of three) and a few others using the 'xxx' variant label . Though this allways fails (as shown below) due to the following P/N mismatch

View attachment 232094

I tried the GUI version and get the same P/N mismatch
View attachment 232095

For the record , here is the GPU-Z info
View attachment 232096




Any suggestion appreciated .

Thanks
That bios is missing the memory profile hence auto detect. You will need to get a picture of white stickrrs on card snd remove heatsink to verify what ram is on the card
 
a few pics
16419850596287310825612122596996.jpg

memory
16419851899279146506996810149584.jpg


sticker

16419853865737676944493755278172.jpg

sticker2
16419857174247209961388698975515.jpg

Also there is a secondary BIOS (BIOS switch) as shown
1641987200118.png

1641987274826.png
 

Attachments

  • 16419854738624107270031758728955.jpg
    16419854738624107270031758728955.jpg
    3.2 MB · Views: 73
  • 16419855113362863979289016248671.jpg
    16419855113362863979289016248671.jpg
    1.7 MB · Views: 72
  • 16419856662114070618215613568980.jpg
    16419856662114070618215613568980.jpg
    1.5 MB · Views: 66
Last edited:
Sorry for late reply

Yeah you for sure have the wrong bios on there.

I will get on it.

I read on XFX your gpu will rise to 1386 from 1366 (auto OC)
These are Samsung FB files:

1366

2019 03 13




1386

2019 03 11


These are Samsung FC files:

1366

2020 03 18


2019 08 20










1386
2019 09 20

 
Last edited:
Back
Top