kostap
New Member
- Joined
- Nov 11, 2008
- Messages
- 12 (0.00/day)
Processor | Intel Q6600 G0 |
---|---|
Motherboard | Gigabyte EP45-DS3R |
Cooling | Xigmatec HDT-S1283 |
Memory | Corsair TWIN2X4096-6400C4DHX (2X2GB) |
Video Card(s) | Sapphire RADEON HD 4850 |
Storage | Samsung SpinPoint F1 HD103UJ 1TB |
Display(s) | HP LP2275W |
Case | NZXT LEXA |
Audio Device(s) | Onboard |
Power Supply | Corsair 550W VX Series |
It's my first post in this forum so I would like first of all to salute the community.
Now, the reason I make this thread is because my 2x2GB CM2X2048-6400C4DHX Corsair RAM sticks react peculiarly when both of them are mounted on motherboard EP45-DS3R. But let me describe you the problem. When I put the two ram sticks in slots 1 and 3 OR 2 and 4(Dual channel mode) I have a crash on Windows Vista in approximately 0-3 minutes after logging in. If the Ram sticks are in slots 1 and 2 OR 3 and 4 then my system is a bit more reliable and it will crash in 1-4 hours, it depends on load of the system. The thing is that when I remove one of the sticks, then the computer stops these annoying crashes and reacts perfectly. No freeze for more than 48 hours. So I downloaded memtest86+ V2.01 to check if my ram sticks have any problems. After 7 passses for each memory card both finished with no errors at all. But when I started the test with both memory sticks mounted, memtest never made it to finish the test. For case 1 ( slot1 and slot3 OR slot2 and slot4) memtest freeze in less than 20 seconds and with more than 32 errors, while for case 2 (slot1 and slot2 OR slot3 and slot4) with 70-180 errors and freezees at 20-35 minutes.
I have done some adjustments by my own reading some threads which looked like this. Anyway, I've downloaded latest bios version F10 FOR EP45-DS3R and timings are now correct 4-4-4-12 while I had to do that manually before. I setted DRAM Voltage at 2.100V which is manufacturer's recommended setting and nothing else because of the fear that I would make any damages. I am suspicious that Mobo is faulty but before I make any move I would like to share it with you. Any thoughts?
My system:
PSU: Corsair 550W VX Series
Mobo: Gigabyte EP45-DS3R rev1.0
CPU: Intel quad core Q6600 G0 (9X266MHz)
GPU: Sapphire HD 4850 512MB GDDR3 Dual DVI Dual slot cooler HDTV Out PCI-E Graphics Card
RAM: Corsair 4GB (2x2GB) DDR2 800MHz TWIN2X4096-6400C4DHX
HDD: Samsung SpinPoint F1 HD103UJ 1TB Hard Drive SATAII
DVD: Pioneer DVR-216BK 20x DVD±RW Internal SATA
Now, the reason I make this thread is because my 2x2GB CM2X2048-6400C4DHX Corsair RAM sticks react peculiarly when both of them are mounted on motherboard EP45-DS3R. But let me describe you the problem. When I put the two ram sticks in slots 1 and 3 OR 2 and 4(Dual channel mode) I have a crash on Windows Vista in approximately 0-3 minutes after logging in. If the Ram sticks are in slots 1 and 2 OR 3 and 4 then my system is a bit more reliable and it will crash in 1-4 hours, it depends on load of the system. The thing is that when I remove one of the sticks, then the computer stops these annoying crashes and reacts perfectly. No freeze for more than 48 hours. So I downloaded memtest86+ V2.01 to check if my ram sticks have any problems. After 7 passses for each memory card both finished with no errors at all. But when I started the test with both memory sticks mounted, memtest never made it to finish the test. For case 1 ( slot1 and slot3 OR slot2 and slot4) memtest freeze in less than 20 seconds and with more than 32 errors, while for case 2 (slot1 and slot2 OR slot3 and slot4) with 70-180 errors and freezees at 20-35 minutes.
I have done some adjustments by my own reading some threads which looked like this. Anyway, I've downloaded latest bios version F10 FOR EP45-DS3R and timings are now correct 4-4-4-12 while I had to do that manually before. I setted DRAM Voltage at 2.100V which is manufacturer's recommended setting and nothing else because of the fear that I would make any damages. I am suspicious that Mobo is faulty but before I make any move I would like to share it with you. Any thoughts?
My system:
PSU: Corsair 550W VX Series
Mobo: Gigabyte EP45-DS3R rev1.0
CPU: Intel quad core Q6600 G0 (9X266MHz)
GPU: Sapphire HD 4850 512MB GDDR3 Dual DVI Dual slot cooler HDTV Out PCI-E Graphics Card
RAM: Corsair 4GB (2x2GB) DDR2 800MHz TWIN2X4096-6400C4DHX
HDD: Samsung SpinPoint F1 HD103UJ 1TB Hard Drive SATAII
DVD: Pioneer DVR-216BK 20x DVD±RW Internal SATA