The AMD Phenom II OC'ers Club

cadaveca · Nov 25, 2010

crazyeyesreaper said:
you might have a golden chip you jackass i need 1.425v for 2800nb to be stable man i hate you right now

Velvet Wafer said:
indeed its a golden chip! one of 3 i ever knew of

You guys. Heh. It's my old chip, of course it's a good one. :rolleyes:

Same story with everyone that buys my old stuff, each and every time.

:shadedshu

I credit my burn-in process... :laugh:

Athlon, use 2400mhz HT. Just bump the multi up.

Or, go to 300+ mhz HTT, for 3000NB+/2400HTT+. You'll need to push chipset and sb volts up a bit though, as USB will start to fail somewheres around 300 if you do add more volts. 1.25v on boardNB and SB should be good to go.

Of course, with jsut 300, you'll be @ either 3900mhz, or 4200, so go a few higher to get 4ghz again. Push that stable, and you'll get the best you can.

Athlon2K15 · Nov 25, 2010

what do i gotta set for CPU/NB voltage dave?

cadaveca · Nov 25, 2010

kinda depends on ram, right, so you might need up to 1.4v, shouldn't bother giving more than that.

Don't be afraid to run 2.65v into VDDA, either.

Similar to cpuPLL on Intel, but more effective, IMHO.

mastrdrver · Nov 25, 2010

JrRacinFan said:
My unlocked 555 Black and a 965 C2 that I was clocking on a Gigabyte 790FX took 1.4v to keep stable at 3.8. Might be coincidence.

Its probably the board. My 955BE C3 does 3800 on 1.4v but not on any of the other 3 boards I've tried but only on my Gigabyte 790X and 790FX (now dead). Any other board needed more volts but they were also MSI boards too fwiw.

Velvet Wafer · Nov 26, 2010

cadaveca said:
I credit my burn-in process...

i assume you wont share your knowledge regarding that?

exodusprime1337 · Nov 26, 2010

crazyeyesreaper said:
you might have a golden chip you jackass i need 1.425v for 2800nb to be stable man i hate you right now

don't be mean to him.. iirc aren't you using a chip i gave to you/traded for a lesser model?

fullinfusion · Nov 26, 2010

Velvet Wafer said:
i assume you wont share your knowledge regarding that?

Him? prob not!

Me! Yes I'll give ya my heads up on Burning the CPU!

Water cooled.... turn down the fans to low setting.... Crank up the volts while running stock cpu settings. Get the cpu hot!!! *thats the key*

Next

Up the cu volts to 1.55V for stock clocks and run AOD Overdrive stress setting for an hour!
After it passes your good to go.
Worked for me two times in a row :rockout:

clocking to 4.8GHz atm with little tweaking and running 18C

But then again its -15c here and I have the window open.

crazyeyesreaper · Nov 26, 2010

exodusprime1337 said:
don't be mean to him.. iirc aren't you using a chip i gave to you/traded for a lesser model?

yes indeed i am if i remember you were running 4100cpu 2800nb 24/7 on water

my Frio allows 4000 /2800 at 1.55 / 1.425v but i run 3800 / 2600 with 1.45 and 1.3v

erocker · Nov 26, 2010

cadaveca said:
I credit my burn-in process...

Velvet Wafer said:
i assume you wont share your knowledge regarding that?

I will. He covers the pins in bullshit.

Lol.

Velvet Wafer · Nov 26, 2010

fullinfusion said:
Him? prob not!

Me! Yes I'll give ya my heads up on Burning the CPU!

Water cooled.... turn down the fans to low setting.... Crank up the volts while running stock cpu settings. Get the cpu hot!!! *thats the key*

Next

Up the cu volts to 1.55V for stock clocks and run AOD Overdrive stress setting for an hour!
After it passes your good to go.
Worked for me two times in a row

clocking to 4.8GHz atm with little tweaking and running 18C

But then again its -15c here and I have the window open.

thanks, how did you find out the burn actually did something?

Wile E · Nov 27, 2010

Burning in has never been proven to do anything.

Mussels · Nov 27, 2010

Wile E said:
Burning in has never been proven to do anything.

the only way i think it can help, is to help soften/smooth out the compounds used in CPU's under the heatspreaders. you know, evens out air bubbles or whatnot.

Wile E · Nov 27, 2010

Yep, that's about the only way. Compounds like AS5 needs time to cure properly to get the best results, and cycling heat cures it faster.

Mussels · Nov 27, 2010

Wile E said:
Yep, that's about the only way. Compounds like AS5 needs time to cure properly to get the best results, and cycling heat cures it faster.

i wasnt even thinking thermal grease, i meant on the inside of the chip. UNDER the heatspreader, between it and the CPU/GPU core.

Wile E · Nov 27, 2010

Mussels said:
i wasnt even thinking thermal grease, i meant on the inside of the chip. UNDER the heatspreader, between it and the CPU/GPU core.

Considering a large portion of them are soldered these days, I doubt there would be any significant difference.

Mussels · Nov 27, 2010

Wile E said:
Considering a large portion of them are soldered these days, I doubt there would be any significant difference.

true. but if ANYTHING was to soften it, it would be those high temp runs.

Athlonite · Nov 28, 2010

Meh

Stupid AMD Overdrive software wont let me adjust the multi on my PII X4 940BE seems to think it's already at max with only 15x

Mussels · Nov 28, 2010

Athlonite said:
Meh Stupid AMD Overdrive software wont let me adjust the multi on my PII X4 940BE seems to think it's already at max with only 15x

i've seen that, only lets you turn it down and not up on the latest version. retarded.

Athlonite · Nov 28, 2010

Mussels said:
i've seen that, only lets you turn it down and not up on the latest version. retarded.

That's exactly the problem :shadedshu dumb ass AMD programmers :slap:

YautjaLord · Dec 10, 2010

Got the f***er working !!!!!!!!!! Changed CPU, mobo, RAM & chassis, now i have HAF932, Mushkin RedLine 2x2GB DDR3 1600MHz (forced it in BIOS to 1600MHz, reads as 800MHz unganged in CPU-Z), M4N98TD-EVO (i beleive i gonna be in love with this mobo :laugh:

) & - behold - Phenom II 965BE 125W rev.C3 3.4GHz. The only "rant" i have - i am confused, CPU Ratio in M4N98TD-EVO & CPU's multi in M3N-HT Deluxe are the same thing or should i hit F11 or update BIOS to see the CPU's multi ? Other than that - every-f***ing-thing is paradise ! :toast:

brandonwh64 · Dec 10, 2010

You should be able to see the multi in your motherboards bios. are you wanting to OC it to 4ghz

JrRacinFan · Dec 10, 2010

Mussels said:
i've seen that, only lets you turn it down and not up on the latest version. retarded.

brandonwh64 said:
You should be able to see the multi in your motherboards bios. are you wanting to OC it to 4ghz

That's when you use Phenom MSR Tweaker. My cousins cheap nvidia 7025 based didn't have ANY OC options in bios so i showed him that software. He liked it til got sick of it and bought an overclocking friendly board.

YautjaLord · Dec 10, 2010

2brandon :

I see the CPU Ratio & not CPU multi in BIOS section of M4N98TD-EVO. It goes like this : Auto, 0.4, 0.5, etc... & probably 17, 20, etc.... It might be the multi, but i'm not so sure bout that. Also - should i enable the NVCC, ECC & NVidia Unleashed modes ? NVCC=Nvidia Calibration, DRAM ECC=Error Checking & Correction, Unleashed Mode=Full potential of CPU with warning of frying the CPU.

2JrRacinFan :

Phenom MSR Tweaker ? If it's soft, than i'm confused since i heard of Phenom TWKR Edition CPU. As for OC'ing friendly mobo - M4N98TD-EVO OC friendly enough, i think. Might be wrong. Phenom II 965BE is Black Edition therefore OC friendly as hell. :laugh:

*UPDATE*

Played with it (CPU Ratio) & other overclocking/overvoltaging stuff & can say - it is CPU Multi, but in M4N98TD-EVO's flavor.

Currently nailed it @ 3.6GHz/1.375v. Soon 3.8GHz & test it with Vantage & LinX.

*UPDATE #2*

3.7GHz/1.375v - Vantage & SuperPi 32M scores below.

Munki · Dec 17, 2010

Hey guys,

I was in bed asleep, so forgive me if this is slurred a bit.

I need to change out my CPU cooler to get a accusal "ok" OC.

mobo + CPU in stats to the left.

im hitting about 67C on hardware monitor with my multiplier set on 17x (matched 965)

Crazyeyesreaper and I walked through the BIOS checked everything out and determined it was in fact the cooler (although, everyone knows its a shyt cooler for quad cores).

I'm looking at the CoolerMaster Hyper 212 plus cooler and changing out the oem fan that puts out 76.8cfm with some Scythe SY1225SL12SH 120mm "Slipstream" fans putting out 110.31 cfm. in a push - pull config. noise isn't a factor so I never even cared to look at it (running ultra kraze as exhaust so its loud anyways).

You guys think this will get a decent overclock? I'd like a 3.8 but idk if that is a reachable goal.

I looked up the oem fan that comes with the 212 and it appears to be mislabeled junk.

http://www.hardwarecanucks.com/foru...aster-hyper-212-plus-cpu-cooler-review-5.html

here are the expected products:

Two:
Scythe SY1225SL12SH 120mm "Slipstream" Case Fan
One:
COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatp...

Thermal paste:
Artic Silver 5 (cause its what I have)

What do you guys think?

I want to thank Crazyeyesreaper and JrRacingFan for taking the time to help me out with this, I'm a complete n00b at overclocking. Thanks Guys.

Velvet Wafer · Dec 17, 2010

Munki said:
Hey guys,

I was in bed asleep, so forgive me if this is slurred a bit.

I need to change out my CPU cooler to get a accusal "ok" OC.

mobo + CPU in stats to the left.

im hitting about 67C on hardware monitor with my multiplier set on 17x (matched 965)

Crazyeyesreaper and I walked through the BIOS checked everything out and determined it was in fact the cooler (although, everyone knows its a shyt cooler for quad cores).

I'm looking at the CoolerMaster Hyper 212 plus cooler and changing out the oem fan that puts out 76.8cfm with some Scythe SY1225SL12SH 120mm "Slipstream" fans putting out 110.31 cfm. in a push - pull config. noise isn't a factor so I never even cared to look at it (running ultra kraze as exhaust so its loud anyways).

You guys think this will get a decent overclock? I'd like a 3.8 but idk if that is a reachable goal.

I looked up the oem fan that comes with the 212 and it appears to be mislabeled junk.

http://www.hardwarecanucks.com/foru...aster-hyper-212-plus-cpu-cooler-review-5.html

here are the expected products:

Two:
Scythe SY1225SL12SH 120mm "Slipstream" Case Fan
One:
COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatp...

Thermal paste:
Artic Silver 5 (cause its what I have)

What do you guys think?

I want to thank Crazyeyesreaper and JrRacingFan for taking the time to help me out with this, I'm a complete n00b at overclocking. Thanks Guys.

a new cooler is not an option? there are some pretty good ones for small money already

Processor	Intel Core i9 11900K
Motherboard	MSI Z590 Carbon EK X
Cooling	Custom Water
Memory	Team DDR4 4000MHz
Video Card(s)	ASUS TUF RTX 3080 OC
Storage	WD WN850 1TB
Display(s)	43" LG NanoCell 4K 120Hz
Power Supply	Asus Thor 1200w
Mouse	Asus Strix Evolve
Keyboard	Asus Strix Claymore

System Name	Money Hole
Processor	Core i7 970
Motherboard	Asus P6T6 WS Revolution
Cooling	Noctua UH-D14
Memory	2133Mhz 12GB (3x4GB) Mushkin 998991
Video Card(s)	Sapphire Tri-X OC R9 290X
Storage	Samsung 1TB 850 Evo
Display(s)	3x Acer KG240A 144hz
Case	CM HAF 932
Audio Device(s)	ADI (onboard)
Power Supply	Enermax Revolution 85+ 1050w
Mouse	Logitech G602
Keyboard	Logitech G710+
Software	Windows 10 Professional x64

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	HOMECOMPUTER
Processor	Intel i9 - 9900k @ 5.1Ghz - 1.31v
Motherboard	Asux ROG Maximus XI Hero Wifi
Cooling	ek supremacy evo full nickle, 2xEK 360 Radiators, ek d5 pump/res combo, ek full cover 2080ti block
Memory	16GB DDR 3600 Trident Z RGB
Video Card(s)	Gigabyte RTX 2080TI
Storage	1xWD black NVME 500GB, 1xSamsung 970 Evo Plus NVME 1TB
Display(s)	2 Dell Gaming 27" 1440P Gsync
Case	Lian LI PC-011 Dynamic
Audio Device(s)	onboard
Power Supply	Evga P2 1200Watt
Mouse	Zowie FK1+
Keyboard	Corsair Strafe rgb silent
Software	Windows 10 Pro
Benchmark Scores	i'm working on that

System Name	Old reliable
Processor	Intel 8700K @ 4.8 GHz
Motherboard	MSI Z370 Gaming Pro Carbon AC
Cooling	Custom Water
Memory	32 GB Crucial Ballistix 3666 MHz
Video Card(s)	MSI GTX 1080 Ti Gaming X
Storage	3x SSDs 2x HDDs
Display(s)	Dell U2412M + Samsung TA350
Case	Thermaltake Core P3 TG
Audio Device(s)	Samson Meteor Mic / Generic 2.1 / KRK KNS 6400 headset
Power Supply	Zalman EBT-1000
Mouse	Mionix NAOS 7000
Keyboard	Mionix

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS TUF x670e
Cooling	EK AIO 360. Phantek T30 fans.
Memory	32GB G.Skill 6000Mhz
Video Card(s)	Asus RTX 4090
Storage	WD m.2
Display(s)	LG C2 Evo OLED 42"
Case	Lian Li PC 011 Dynamic Evo
Audio Device(s)	Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply	FSP Hydro Ti PRO 1000W
Mouse	Razer Basilisk V3 Pro
Keyboard	Tester84
Software	Windows 11

System Name	The ClusterF**k
Processor	980X @ 4Ghz
Motherboard	Gigabyte GA-EX58-UD5 BIOS F12
Cooling	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s)	Evga GTX 580
Storage	Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s)	HP LP2475w 24" 1920x1200 IPS
Case	Technofront Bench Station
Audio Device(s)	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software	Win7 Ultimate N x64, OSX 10.8.4

System Name	Rainbow Sparkles (Power efficient, <350W gaming load)
Processor	Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard	Asus x570-F (BIOS Modded)
Cooling	Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory	2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s)	Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage	2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s)	Phillips 32 32M1N5800A (4k144), LG 32" (4K60) \| Gigabyte G32QC (2k165) \| Phillips 328m6fjrmb (2K144)
Case	Fractal Design R6
Audio Device(s)	Logitech G560 \| Corsair Void pro RGB \|Blue Yeti mic
Power Supply	Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse	Logitech G Pro wireless + Steelseries Prisma XL
Keyboard	Razer Huntsman TE ( Sexy white keycaps)
VR HMD	Oculus Rift S + Quest 2
Software	Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores	Nyooom.

System Name	Cumquat 2021
Processor	AMD RyZen R7 7800X3D
Motherboard	Asus Strix X670E - E Gaming WIFI
Cooling	Deep Cool LT720 + CM MasterGel Pro TP + Lian Li Uni Fan V2
Memory	32GB GSkill Trident Z5 Neo 6000
Video Card(s)	Sapphire Nitro+ OC RX6800 16GB DDR6 2270Cclk / 2010Mclk
Storage	1x Adata SX8200PRO NVMe 1TB gen3 x4 1X Samsung 980 Pro NVMe Gen 4 x4 1TB, 12TB of HDD Storage
Display(s)	AOC 24G2 IPS 144Hz FreeSync Premium 1920x1080p
Case	Lian Li O11D XL ROG edition
Audio Device(s)	RX6800 via HDMI + Pioneer VSX-531 amp Technics 100W 5.1 Speaker set
Power Supply	EVGA 1000W G5 Gold
Mouse	Logitech G502 Proteus Core Wired
Keyboard	Logitech G915 Wireless
Software	Windows 11 X64 PRO (build 23H2)
Benchmark Scores	it sucks even more less now ;)

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2

System Name	Dual Build Streamer
Processor	Ryzen 7900x3d : Ryzen 4600G
Motherboard	AsRock B650E Steel Legend : Giga B450i Aorus
Cooling	Custom Water 1x420 : Stock
Memory	32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s)	PowerColor 7900 XTX Liquid Devil: iGPU
Storage	20+ TB
Display(s)	Sammy 49" 5k Ultrawide
Case	Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s)	Onboard : Onboard
Power Supply	EVGA 1200W P2
Mouse	Corsair M65 RGB Elite White
Keyboard	Hyperx Origins 65
Software	Windows 10

Processor	AMD Ryzen 1700
Motherboard	Gigabyte AB350 GAMING 3
Memory	16GB (2x8) 3200MHz
Display(s)	Acer 24" LCD
Software	Windows 10 Pro

The AMD Phenom II OC'ers Club

My name is Dave

HyperVtX™

My name is Dave

Vanguard Beta Tester

Not a Moderator

*

Power User

Freshwater Moderator

Power User

Freshwater Moderator

Power User

Freshwater Moderator

Freshwater Moderator

Addicted to Bacon and StarCrunches!!!

Served 5k and counting ...

Attachments