- Joined
- Mar 9, 2009
- Messages
- 227 (0.04/day)
- Location
- Denmark
Processor | Intel I7 4790k |
---|---|
Motherboard | MSI Z87 - G45 |
Cooling | Noctua NH-D15S |
Memory | 16gb 1600mhz (2000mhz OC) |
Video Card(s) | Gigabyte GTX 1080 |
Storage | 750gb + 256gb ssd, 2TB HDD |
Display(s) | Samsung C24fg70 144hz |
Case | Fractal Design Define C |
Audio Device(s) | Motherboard, Realtek |
Power Supply | CM Silent Pro M1000 |
Mouse | Roccat Kone XTD |
Keyboard | HyperX Alloy FPS Mechanical Gaming Keyboard |
Software | Windows 10 x64 |
Hi, so the whole day, and some yesterday
I've been trying to figure out what causes this.
Everything worked,
Decent but had alot of random old stuff on my drive.
So I did a reformat and fresh install of windows. Which went fine, installed all avalible updates from windows update and then tried to install ATI display driver.
Im using the HD 5870, so I get the drivers installed, it says finished with no trouble, all good.
However, after I restart my system it only gets to the welcome screen, it dosen't show the blue welcome screen, thats where it turns off and the monitor says "No input/signal".
So I tried serval time to uinstall the drivers and install them again.
I even did reformat it once.
But everytime it gets stuck there, screen turns off but can hear the pc kinda continiues to work.
I should say that the display works fine in safe mode where it dosen't load the drivers.
Thanks in advanced
EDIT:
Im using Windows 7 64bit
Tried older drivers
Ati 5870
I've been trying to figure out what causes this.
Everything worked,
Decent but had alot of random old stuff on my drive.
So I did a reformat and fresh install of windows. Which went fine, installed all avalible updates from windows update and then tried to install ATI display driver.
Im using the HD 5870, so I get the drivers installed, it says finished with no trouble, all good.
However, after I restart my system it only gets to the welcome screen, it dosen't show the blue welcome screen, thats where it turns off and the monitor says "No input/signal".
So I tried serval time to uinstall the drivers and install them again.
I even did reformat it once.
But everytime it gets stuck there, screen turns off but can hear the pc kinda continiues to work.
I should say that the display works fine in safe mode where it dosen't load the drivers.
Thanks in advanced
EDIT:
Im using Windows 7 64bit
Tried older drivers
Ati 5870
Last edited: