FordGT90Concept
"I go fast!1!11!1!"
- Joined
- Oct 13, 2008
- Messages
- 26,263 (4.33/day)
- Location
- IA, USA
| System Name | BY-2021 |
|---|---|
| Processor | AMD Ryzen 7 5800X (65w eco profile) |
| Motherboard | MSI B550 Gaming Plus |
| Cooling | Scythe Mugen (rev 5) |
| Memory | 2 x Kingston HyperX DDR4-3200 32 GiB |
| Video Card(s) | AMD Radeon RX 7900 XT |
| Storage | Samsung 980 Pro, Seagate Exos X20 TB 7200 RPM |
| Display(s) | Nixeus NX-EDG274K (3840x2160@144 DP) + Samsung SyncMaster 906BW (1440x900@60 HDMI-DVI) |
| Case | Coolermaster HAF 932 w/ USB 3.0 5.25" bay + USB 3.2 (A+C) 3.5" bay |
| Audio Device(s) | Realtek ALC1150, Micca OriGen+ |
| Power Supply | Enermax Platimax 850w |
| Mouse | Nixeus REVEL-X |
| Keyboard | Tesoro Excalibur |
| Software | Windows 10 Home 64-bit |
| Benchmark Scores | Faster than the tortoise; slower than the hare. |
This is an application that assists in making applications large address aware. When a 32-bit application is large address aware, it can access up to 4 GiB on x64 operating systems and all memory that isn't used by the operating system and other applications on x86. 64-bit versions of Windows require no modifications to the operating system to benefit from this application; however, in 32-bit versions of Windows, you must increase the user memory setting. Instructions how to do this are in spoiler below. It is not advised to use this application if you have less than 3 GiB of RAM.
This application may not work on older executables (predating 2000).
Basic mode:
1) Open an executable to modify (click on the "..." button to browse). Alternatively, you can drag and drop a file on the gray text box.
2) Check or uncheck the box specifying whether or not you want to make it large address aware.
3) Click on save to commit the changes.
Intermediate and advanced mode (Advanced shown):
1) Add files through the "Add" drop down menu or click on on Add Files. Alternatively, you can drag and drop the files into the list view.
2) Select the files you wish to modify by checking the boxes or using the "Select" drop menu.
3) Either click on "Switch Large Address Aware" (turns true to false and false to true) or select an option from the "With Selected" drop down menu.
4) If you wish to remove files from the list, you may do so in Advanced mode via the "Remove" drop down menu.
Requirements:
.NET Framework 3.5 or newer (get the latest version from Windows Update under optional updates).
Disclaimer:
This software is provided without guarantee nor warranty. Use at your own discretion. The creators of this software and the owners of this site cannot be held liable for any damages inflicted.
Process Monitor:
Process Monitor is useful in discovering if making the application large address aware will be helpful.
This application may not work on older executables (predating 2000).
Basic mode:
1) Open an executable to modify (click on the "..." button to browse). Alternatively, you can drag and drop a file on the gray text box.
2) Check or uncheck the box specifying whether or not you want to make it large address aware.
3) Click on save to commit the changes.
Intermediate and advanced mode (Advanced shown):
1) Add files through the "Add" drop down menu or click on on Add Files. Alternatively, you can drag and drop the files into the list view.
2) Select the files you wish to modify by checking the boxes or using the "Select" drop menu.
3) Either click on "Switch Large Address Aware" (turns true to false and false to true) or select an option from the "With Selected" drop down menu.
4) If you wish to remove files from the list, you may do so in Advanced mode via the "Remove" drop down menu.
Requirements:
.NET Framework 3.5 or newer (get the latest version from Windows Update under optional updates).
Disclaimer:
This software is provided without guarantee nor warranty. Use at your own discretion. The creators of this software and the owners of this site cannot be held liable for any damages inflicted.
AutoCAD (32-bit versions)
Assassin's Creed (2008) v1.02
Company of Heroes - Patched in unknown version
Corel PaintShop Pro X3
The Elder Scrolls V: Skyrim - Patched in 1.3.10
Kerkythea 2008 Echo
Galactic Civilizations II
Mass Effect
Saboteur, The
Sid Meier's Railroads!
Silent Hunter 4
SimCity 4 Deluxe
Sims 3, The - Patched in 1.17/2.12/3.8/4.5/5.2/6.0
Sins of a Solar Empires - Diplomacy
S.T.A.L.K.E.R.
Supreme Commander
Supreme Commander: Forged Alliance
Warmane - Game Server
World Builder for Command & Conquer 3: Tiberium Wars & Command & Conquer 3: Kane's Wrath
World of Warcraft - up to v3.3.5a
Assassin's Creed (2008) v1.02
Corel PaintShop Pro X3
Kerkythea 2008 Echo
Galactic Civilizations II
Mass Effect
Saboteur, The
Sid Meier's Railroads!
Silent Hunter 4
SimCity 4 Deluxe
Sins of a Solar Empires - Diplomacy
S.T.A.L.K.E.R.
Supreme Commander
Supreme Commander: Forged Alliance
World Builder for Command & Conquer 3: Tiberium Wars & Command & Conquer 3: Kane's Wrath
World of Warcraft - up to v3.3.5a
Process Monitor is useful in discovering if making the application large address aware will be helpful.
WARNING: Upgrading the operating system to 64-bit is the best solution. Continue at your risk!
1. In Windows Explorer, navigate to the system partition. This is the partition that holds hardware specific Windows files such as Boot.ini and NTLDR.
2. If you cannot see the Boot.ini file, it could be because the folder options are set to hide protected operating system files. If this is the case, in the Explorer window, click Tools, Folder Options, and then click View. Clear the Hide protected operating system files (Recommended) check box. When prompted, click Yes.
3. After the Boot.ini file is visible in Explorer, right-click the file, click Open With, and then click Notepad to open the file.
4. Add the /3GB switch to the end of the line starting with "multi" under the [Operating Systems] section.
5. Save the changes and close Notepad.
6. Restart the computer for the change to take effect.
Source: http://technet.microsoft.com/en-us/library/bb124810(EXCHG.65).aspx
1. In Windows Explorer, navigate to the system partition. This is the partition that holds hardware specific Windows files such as Boot.ini and NTLDR.
2. If you cannot see the Boot.ini file, it could be because the folder options are set to hide protected operating system files. If this is the case, in the Explorer window, click Tools, Folder Options, and then click View. Clear the Hide protected operating system files (Recommended) check box. When prompted, click Yes.
3. After the Boot.ini file is visible in Explorer, right-click the file, click Open With, and then click Notepad to open the file.
4. Add the /3GB switch to the end of the line starting with "multi" under the [Operating Systems] section.
5. Save the changes and close Notepad.
6. Restart the computer for the change to take effect.
1. In Windows Explorer, navigate to the system partition. This is the partition that holds hardware specific Windows files such as Boot.ini and NTLDR.
2. If you cannot see the Boot.ini file, it could be because the folder options are set to hide protected operating system files. If this is the case, in the Explorer window, click Tools, Folder Options, and then click View. Clear the Hide protected operating system files (Recommended) check box. When prompted, click Yes.
3. After the Boot.ini file is visible in Explorer, right-click the file, click Open With, and then click Notepad to open the file.
4. Remove the /3GB switch from the end of the line starting with "multi" under the [Operating Systems] section.
5. Save the changes and close Notepad.
6. Restart the computer for the change to take effect.
2. If you cannot see the Boot.ini file, it could be because the folder options are set to hide protected operating system files. If this is the case, in the Explorer window, click Tools, Folder Options, and then click View. Clear the Hide protected operating system files (Recommended) check box. When prompted, click Yes.
3. After the Boot.ini file is visible in Explorer, right-click the file, click Open With, and then click Notepad to open the file.
4. Remove the /3GB switch from the end of the line starting with "multi" under the [Operating Systems] section.
5. Save the changes and close Notepad.
6. Restart the computer for the change to take effect.
Source: http://technet.microsoft.com/en-us/library/bb124810(EXCHG.65).aspx
WARNING: A lot of people are reporting problems with changing user space on Windows XP 32-bit. Unfortunately, upgrading the operating system to 64-bit is the best solution. Continue at your risk!
1. Right-click My Computer and select Properties. The System Properties dialog box will appear.
2. Click the Advanced tab.
3. In the Startup and Recovery area, click Settings. The Startup and Recovery dialog box will appear.
4. In the System startup area, click Edit. This will open the Windows boot.ini file in Notepad.
5. In the [Operating Systems] section, add the following switch to the end of the startup line that includes the /fastdetect switch: /3GB
6. Save the changes and close Notepad.
7. Click OK two times to close the open dialog boxes, and then restart the computer for the change to take effect.
Source: http://technet.microsoft.com/en-us/library/bb124810(EXCHG.65).aspx
1. Right-click My Computer and select Properties. The System Properties dialog box will appear.
2. Click the Advanced tab.
3. In the Startup and Recovery area, click Settings. The Startup and Recovery dialog box will appear.
4. In the System startup area, click Edit. This will open the Windows boot.ini file in Notepad.
5. In the [Operating Systems] section, add the following switch to the end of the startup line that includes the /fastdetect switch: /3GB
6. Save the changes and close Notepad.
7. Click OK two times to close the open dialog boxes, and then restart the computer for the change to take effect.
1. Right-click My Computer and select Properties. The System Properties dialog box will appear.
2. Click the Advanced tab.
3. In the Startup and Recovery area, click Settings. The Startup and Recovery dialog box will appear.
4. In the System startup area, click Edit. This will open the Windows boot.ini file in Notepad.
5. In the [Operating Systems] section, remove /3GB from the end of the startup line that includes the /fastdetect switch.
6. Save the changes and close Notepad.
7. Click OK two times to close the open dialog boxes, and then restart the computer for the change to take effect.
2. Click the Advanced tab.
3. In the Startup and Recovery area, click Settings. The Startup and Recovery dialog box will appear.
4. In the System startup area, click Edit. This will open the Windows boot.ini file in Notepad.
5. In the [Operating Systems] section, remove /3GB from the end of the startup line that includes the /fastdetect switch.
6. Save the changes and close Notepad.
7. Click OK two times to close the open dialog boxes, and then restart the computer for the change to take effect.
Source: http://technet.microsoft.com/en-us/library/bb124810(EXCHG.65).aspx
1. Open command prompt with Adminitrator rights. To do this, go to Programs, Accessories, right-click on Command Prompt and select "Run as Administrator."
2. Enter the following at the prompt and press enter:
3. Close the prompt and restart the computer.
2. Enter the following at the prompt and press enter:
Code:
bcdedit /set IncreaseUserVA 30723. Close the prompt and restart the computer.
1. Open command prompt with Adminitrator rights. To do this, go to Programs, Accessories, right-click on Command Prompt and select "Run as Administrator."
2. Enter the following at the prompt and press enter:
3. Close the prompt and restart the computer.
2. Enter the following at the prompt and press enter:
Code:
bcdedit /deletevalue IncreaseUserVA3. Close the prompt and restart the computer.
2.0.4 - Drag and Drop now only accepts executables. Added Remove -> From List and History -> All and Selected menu options. This is useful for if you enable "Load Previous Files."
2.0.3 - Adds an option for loading previous files. Note that enabling this, the application will hang on startup or immediately after checking it as it attempts to load all the files previously examined by the application.
2.0.2 - Fixed a major bug in 2.0.1 that would prevent it from working.
2.0.1 - Adds basic multithreading support.
2.0.0 - Has three modes (Basic, Intermediate, and Advanced) with drag and drop support, the capability of handling multiple files simutaneously, and numerous other major changes.
2.0.3 - Adds an option for loading previous files. Note that enabling this, the application will hang on startup or immediately after checking it as it attempts to load all the files previously examined by the application.
2.0.2 - Fixed a major bug in 2.0.1 that would prevent it from working.
2.0.1 - Adds basic multithreading support.
2.0.0 - Has three modes (Basic, Intermediate, and Advanced) with drag and drop support, the capability of handling multiple files simutaneously, and numerous other major changes.
Drag and drop from the desktop may not work (it will show the access denied icon when hovering) on some computers with UAC enabled because the program requires higher permissions than the desktop. Use the browse functionality to add the files if this is the case.
Last edited:
