xsever
New Member
- Joined
- Apr 7, 2009
- Messages
- 119 (0.02/day)
System Name | The Ultra Machine |
---|---|
Processor | AMD Phenom II X4 720 @ 3.5GHZ 1.4V |
Motherboard | Gigabyte 790GP-UD4H |
Cooling | Core-Contact Freezer 120mm |
Memory | G.Skill Pi Black 4GB PC6400 |
Video Card(s) | XFX 5770 1GB @970/1305 1.1V |
Storage | WD Black 1TB + WD Green 2TB |
Display(s) | 2X Acer 20" LED |
Case | Ultra Wizard Black |
Audio Device(s) | Realtek (Onboard) |
Power Supply | Antec EarthWatts 500 W |
Software | Win7 Ultimate 64-bit |
Hey everyone,
I have a question and who's better to ask then the guys @ TPU.
I have a Sapphire HD4850. My idle clocks with one monitor used to be 160/250. When I added the second monitor, the idle clocks became 550/993. I knew through some research that you need to keep your memory at 993 in order to run dual monitors fine without flickering.
So, I went to the profile directory and opened the xml file. I can see the clocks setup, but the 550/993 are not there. I have no idea where the 550 came from if it is not present in the profile. I changed the clock target, restarted CCC, and applied the profile, and all I got was 160/250 which caused flickering.
So my question is how can I lower/experiment with the core clock while keeping the memory @ 993 without flashing the BIOS. I just want to do it through the profile xml file.
I would really appreciate your help.
Thank you,
N.B: Find attached the xml I modified.
I have a question and who's better to ask then the guys @ TPU.
I have a Sapphire HD4850. My idle clocks with one monitor used to be 160/250. When I added the second monitor, the idle clocks became 550/993. I knew through some research that you need to keep your memory at 993 in order to run dual monitors fine without flickering.
So, I went to the profile directory and opened the xml file. I can see the clocks setup, but the 550/993 are not there. I have no idea where the 550 came from if it is not present in the profile. I changed the clock target, restarted CCC, and applied the profile, and all I got was 160/250 which caused flickering.
So my question is how can I lower/experiment with the core clock while keeping the memory @ 993 without flashing the BIOS. I just want to do it through the profile xml file.
I would really appreciate your help.
Thank you,
N.B: Find attached the xml I modified.