- Joined
- Feb 14, 2010
- Messages
- 96 (0.02/day)
Processor | i5 6600 |
---|---|
Motherboard | Gigabyte Gaming 3 |
Cooling | Hyper 212 |
Video Card(s) | GTX 1070 |
Display(s) | LG 34UC88-B 34-Inch 1440 |
Case | Fractal Design R5 |
Power Supply | EVGA 650G2 |
Mouse | G502 |
Keyboard | Sidewinder |
Software | Windows 10 64 bit |
I am running A-Data 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3-12800). However in CPU-Z it says the DRAM Frequency is 669.7 MHz so it says the max bandwidth is PC3-10700. Which i understand is (669 MHz * 2) * 8 = 10700. But this is 1600, so my question is how do I get it running at 1600. CPU-z says my FSBRAM is 3:10 which makes sense why my DRAM freq is 669. MY FSB is 200MHz so (10/3)*200 = 669. Should I change my FSBRAM to 1:4? Is this possible in the bios? or is there a better way? Also, on NewEgg it says this ram should be run at 1.65v-1.85v but CPU-z says it is at 1.5v. Thoughts? Thanks
AMD Phenom X2 555be
Gigabyte GA-MA790XT-UD4P
AMD Phenom X2 555be
Gigabyte GA-MA790XT-UD4P