neophyte_dave
New Member
- Joined
- Nov 3, 2010
- Messages
- 13 (0.00/day)
System Name | the beast |
---|---|
Processor | phenom ii x4 b50 |
Motherboard | gigabyte ma78lmt-us2h |
Cooling | old but half decent p4 cooler, attached with zip ties |
Memory | corsair cheapo 2x2gb ddr3 |
Video Card(s) | radeon 5570 1024mb |
Storage | samsung spinpoint f3 1tb |
Display(s) | tiny 19" crt |
Case | ez-cool mac clone |
Audio Device(s) | onboard |
Power Supply | delta 400w |
Software | win 7 64bit/debian |
Benchmark Scores | Prime 95, it didn't crash. Or melt. |
Hi.
Just built my new machine, running nice. Phenom ii x2 be, unlocked the cores just to see if I could, seems stable but I can't test properly untill I get a better cooler.
It seems though that the bios over-volts the cpu by default. It's running at 1.4v, I haven't changed any voltage settings. I wouldn't be concerened about the extra .1 volt if I needed it, but I'm wondering if I should manually set it back to 1.3.
Just built my new machine, running nice. Phenom ii x2 be, unlocked the cores just to see if I could, seems stable but I can't test properly untill I get a better cooler.
It seems though that the bios over-volts the cpu by default. It's running at 1.4v, I haven't changed any voltage settings. I wouldn't be concerened about the extra .1 volt if I needed it, but I'm wondering if I should manually set it back to 1.3.