momothedog
New Member
- Joined
- Mar 13, 2012
- Messages
- 4 (0.00/day)
Last edited by a moderator:
Processor | AMD Ryzen 7 7800X3D |
---|---|
Motherboard | ASUS TUF x670e |
Cooling | EK AIO 360. Phantek T30 fans. |
Memory | 32GB G.Skill 6000Mhz |
Video Card(s) | Asus RTX 4090 |
Storage | WD m.2 |
Display(s) | LG C2 Evo OLED 42" |
Case | Lian Li PC 011 Dynamic Evo |
Audio Device(s) | Topping E70 DAC, SMSL SP200 Headphone Amp. |
Power Supply | FSP Hydro Ti PRO 1000W |
Mouse | Razer Basilisk V3 Pro |
Keyboard | Tester84 |
Software | Windows 11 |
Processor | Ryzen 7 5700X |
---|---|
Memory | 48 GB |
Video Card(s) | RTX 4080 |
Storage | 2x HDD RAID 1, 3x M.2 NVMe |
Display(s) | 30" 2560x1600 + 19" 1280x1024 |
Software | Windows 10 64-bit |
do you have the catalyst drivers installed? using remote desktop or anything like it ?
do you have the catalyst drivers installed? using remote desktop or anything like it ?
Processor | Ryzen 7 5700X |
---|---|
Memory | 48 GB |
Video Card(s) | RTX 4080 |
Storage | 2x HDD RAID 1, 3x M.2 NVMe |
Display(s) | 30" 2560x1600 + 19" 1280x1024 |
Software | Windows 10 64-bit |
looks fine to me. Clocks are lower because the card is in low-power state.
BIOS version is listed.
Processor | Ryzen 7 5700X |
---|---|
Memory | 48 GB |
Video Card(s) | RTX 4080 |
Storage | 2x HDD RAID 1, 3x M.2 NVMe |
Display(s) | 30" 2560x1600 + 19" 1280x1024 |
Software | Windows 10 64-bit |
Catalyst 12.2 Driver From www.amd.com
the first tab should show typical 3d clocks at any time
Processor | Ryzen 7 5700X |
---|---|
Memory | 48 GB |
Video Card(s) | RTX 4080 |
Storage | 2x HDD RAID 1, 3x M.2 NVMe |
Display(s) | 30" 2560x1600 + 19" 1280x1024 |
Software | Windows 10 64-bit |
Processor | Ryzen 7 5700X |
---|---|
Memory | 48 GB |
Video Card(s) | RTX 4080 |
Storage | 2x HDD RAID 1, 3x M.2 NVMe |
Display(s) | 30" 2560x1600 + 19" 1280x1024 |
Software | Windows 10 64-bit |