BUCK NASTY
4P Enthusiust
- Joined
- Aug 8, 2007
- Messages
- 4,974 (0.81/day)
- Location
- Port St Lucie, FL. U.S.A.
System Name | Main Rig |
---|---|
Processor | AMD FX-4130 @ 4.8Ghz |
Motherboard | ASUS M5A99X Evo |
Cooling | Coolermaster Hyper 212+ |
Memory | 8GB GSkill DDR3 1600 |
Video Card(s) | ASUS GTX 970 Strix @ 1503Mhz Core |
Storage | Corsair Force 90gb SSD/ WD Caviar Blue 750gb |
Display(s) | ASUS 24" IPS |
Case | Coolermaster Centurion 590 |
Audio Device(s) | Onboard |
Power Supply | Antec TP750 80+ |
Software | Windows 7 Ultimate 64 |
How to set up Notfred's VMWare Virtual Appliance with VMWare Player.
1. Obtain and install VMWare Player. (VMWare) (Filehippo) Filehippo doesn't require registration. I think the only option during install is the install directory. Other than that, any good firewall will probably pop up asking if you want to allow the newly added virtual network cards to have access to your computer or LAN. Make sure you allow these.
2. Obtain the virtual appliance image. (Notfred's link)
3. Open the zip containing folding.vmdk and folding.vmx. Extract these to whatever directories you want to use, say C:\folding\vm for example. If you have a quadcore and are planning to use 2 VMs with static IP addresses (suggested, for monitoring purposes), name it something like vm1 and make a copy of it and call the second directory vm2. If you are using DHCP you can copy it AFTER you make the configuration changes in step 8.
4. (Optional) for management purposes, you may want to change the name of the VM. Right click on the .vmx file and open it with wordpad. Where it says displayName = "Folding@Home", you can change what is in the quotes to whatever you want to help you keep track of which is which if you have a quadcore and are running 2 VMs. You need to do this for both directories.
5. You can now run the virtual machine by double clicking the .vmx file or by opening it through VMWare Player. At this point it will boot up and detect your architechture and launch the appropriate configuration. Assuming it has access to the internet, it will download the SMP client and start folding (under notfred's username).
6. When the VM boots up, take note of the IP address given on the console. Now go to your web browser and go to http://<IP address of VM>. It will bring up the status page. Click "Reconfigure this host and any USB drives". This page is where you will configure your VM.
7. Configure it however you'd like. Remember to change the username and team! Here are some of the options that might not be obvious.
* SMP Instance per - This is how many CPUs to use. I don't think there's any point in using more than 2, as VMWare Player won't use them.
* Remote Reboot - This enables a link on the status page that will let you reboot the machine.
* Install to USB drives on boot - When the VM boots it will try to install to a USB drive for use on another computer or on the same computer for diskless folding. I've never messed with this, so I don't know if it works.
* Console blank time - Simply blanks the VM's window.
* Windows Networking - This will enable samba file sharing on the VM, so you can browse its files from the computer it's running on.
* Login shell - This enables you to login from the VM to run commands. It's very limited and you probably won't need it, but it doesn't hurt to enable it.
8. Click reconfigure. It will tell you it has to reboot. Let it do its thing. After a few seconds it will be back up and folding under your name.
9. Repeat 4 - 9 if you have another static IP VM to set up. If you used DHCP, now would be the time to make a copy of the first VM and get it up and running.
10. (Optional, but suggested) You may want to set the priority to vmware-vmx.exe to low. It may provide a slightly higher PPD yield from the GPU2 clients, especially if they require more than 1-2% CPU. It will also make it less likely to bog down the rest of your computer. If running GPU2 clients, you should also set their priority to slightly higher via the GPU2 client (not task manager) if you haven't already.
11. (Optional, but suggested) To avoid loss of data, you should set your virtual machines to go into a suspend state when closed, rather than powering down. To do this, go to "VMWare Player" at the top of the VMWare Player window, go to "Preferences..." and change the option of "When exiting:" to "Suspend the virtual machine" if the radio button is not already in that position. Now when you hit the X in the upper right hand corner it will take a minute to to save the machine's state to your hard drive for restoration later. Keep in mind that having them shut off for too long can make you miss the deadline! I have about a 12 hour window for having them shut off on my Q6600.
1 If it doesn't have access to the internet, try switching between bridged and NAT and rebooting the VM. You can switch between bridged and NAT by right clicking the two computes in the bottom of the VMWare Player window. This is circled in red in the image below. Also make sure your firewall is allowing it out. It will probably ask you if you want to allow it's virtual network cards when you install VMWare Player.
Monitoring with FahMon
1. Download Fahmon, if you don't have it already. You can get 2.3.99+ here.
2. In the main window right click "Add a client". Fill in the name as whatever you'd like to describe it. I find it helpful to use the name I gave it with displayName= in step 4.
3. In the location box you can either use the IP (if it's static) or the client's hostname. To find the host name you can either look at the console, or go to the client's built in webpage. This name will be something like FOLD-XXXX. In the location box enter \\<either the IP, or the hostname>\c\etc\folding\1\
4. Check the box that says "Client is on a Virtual Machine" and click OK.
5. (Optional) You may want to go to FahMon -> Preferences -> Monitoring and check the "Ignore Asynchronous Clocks" option if you are still having problems with it saying it is hung.
Common Problems
1. You get an out of RAM error. This crashes your folding core and you have to reboot the VM. Unless you move up the RAM, this can happen again.
To increase the amount of RAM, go to VMWare Player on the title bar of the VMWare Player, then go to Troubleshoot, then Change Memory Allocation. At minimum I would use 864, but some people have said it requires more. It has also been reported that being a multiple of 32 helps. Then go to the configuration webpage and reboot the virtual machine. NOTE: this doesn't seem to actually use up more RAM. What it DOES seem to do is increase the size limit of the .vmem file in your folding directory. If your system doesn't have much RAM, don't be afraid to move this up.
2. You lose work when powering off your Virtual Machine.
Remember to set the priorities/affinities for your clients.
1. Obtain and install VMWare Player. (VMWare) (Filehippo) Filehippo doesn't require registration. I think the only option during install is the install directory. Other than that, any good firewall will probably pop up asking if you want to allow the newly added virtual network cards to have access to your computer or LAN. Make sure you allow these.
2. Obtain the virtual appliance image. (Notfred's link)
3. Open the zip containing folding.vmdk and folding.vmx. Extract these to whatever directories you want to use, say C:\folding\vm for example. If you have a quadcore and are planning to use 2 VMs with static IP addresses (suggested, for monitoring purposes), name it something like vm1 and make a copy of it and call the second directory vm2. If you are using DHCP you can copy it AFTER you make the configuration changes in step 8.
4. (Optional) for management purposes, you may want to change the name of the VM. Right click on the .vmx file and open it with wordpad. Where it says displayName = "Folding@Home", you can change what is in the quotes to whatever you want to help you keep track of which is which if you have a quadcore and are running 2 VMs. You need to do this for both directories.
5. You can now run the virtual machine by double clicking the .vmx file or by opening it through VMWare Player. At this point it will boot up and detect your architechture and launch the appropriate configuration. Assuming it has access to the internet, it will download the SMP client and start folding (under notfred's username).
6. When the VM boots up, take note of the IP address given on the console. Now go to your web browser and go to http://<IP address of VM>. It will bring up the status page. Click "Reconfigure this host and any USB drives". This page is where you will configure your VM.
7. Configure it however you'd like. Remember to change the username and team! Here are some of the options that might not be obvious.
* SMP Instance per - This is how many CPUs to use. I don't think there's any point in using more than 2, as VMWare Player won't use them.
* Remote Reboot - This enables a link on the status page that will let you reboot the machine.
* Install to USB drives on boot - When the VM boots it will try to install to a USB drive for use on another computer or on the same computer for diskless folding. I've never messed with this, so I don't know if it works.
* Console blank time - Simply blanks the VM's window.
* Windows Networking - This will enable samba file sharing on the VM, so you can browse its files from the computer it's running on.
* Login shell - This enables you to login from the VM to run commands. It's very limited and you probably won't need it, but it doesn't hurt to enable it.
8. Click reconfigure. It will tell you it has to reboot. Let it do its thing. After a few seconds it will be back up and folding under your name.
9. Repeat 4 - 9 if you have another static IP VM to set up. If you used DHCP, now would be the time to make a copy of the first VM and get it up and running.
10. (Optional, but suggested) You may want to set the priority to vmware-vmx.exe to low. It may provide a slightly higher PPD yield from the GPU2 clients, especially if they require more than 1-2% CPU. It will also make it less likely to bog down the rest of your computer. If running GPU2 clients, you should also set their priority to slightly higher via the GPU2 client (not task manager) if you haven't already.
11. (Optional, but suggested) To avoid loss of data, you should set your virtual machines to go into a suspend state when closed, rather than powering down. To do this, go to "VMWare Player" at the top of the VMWare Player window, go to "Preferences..." and change the option of "When exiting:" to "Suspend the virtual machine" if the radio button is not already in that position. Now when you hit the X in the upper right hand corner it will take a minute to to save the machine's state to your hard drive for restoration later. Keep in mind that having them shut off for too long can make you miss the deadline! I have about a 12 hour window for having them shut off on my Q6600.
1 If it doesn't have access to the internet, try switching between bridged and NAT and rebooting the VM. You can switch between bridged and NAT by right clicking the two computes in the bottom of the VMWare Player window. This is circled in red in the image below. Also make sure your firewall is allowing it out. It will probably ask you if you want to allow it's virtual network cards when you install VMWare Player.
Monitoring with FahMon
1. Download Fahmon, if you don't have it already. You can get 2.3.99+ here.
2. In the main window right click "Add a client". Fill in the name as whatever you'd like to describe it. I find it helpful to use the name I gave it with displayName= in step 4.
3. In the location box you can either use the IP (if it's static) or the client's hostname. To find the host name you can either look at the console, or go to the client's built in webpage. This name will be something like FOLD-XXXX. In the location box enter \\<either the IP, or the hostname>\c\etc\folding\1\
4. Check the box that says "Client is on a Virtual Machine" and click OK.
5. (Optional) You may want to go to FahMon -> Preferences -> Monitoring and check the "Ignore Asynchronous Clocks" option if you are still having problems with it saying it is hung.
Common Problems
1. You get an out of RAM error. This crashes your folding core and you have to reboot the VM. Unless you move up the RAM, this can happen again.
To increase the amount of RAM, go to VMWare Player on the title bar of the VMWare Player, then go to Troubleshoot, then Change Memory Allocation. At minimum I would use 864, but some people have said it requires more. It has also been reported that being a multiple of 32 helps. Then go to the configuration webpage and reboot the virtual machine. NOTE: this doesn't seem to actually use up more RAM. What it DOES seem to do is increase the size limit of the .vmem file in your folding directory. If your system doesn't have much RAM, don't be afraid to move this up.
2. You lose work when powering off your Virtual Machine.
Remember to set the priorities/affinities for your clients.
Last edited: