ASRockIQ
New Member
- Joined
- Dec 9, 2008
- Messages
- 948 (0.17/day)
- Location
- Daphne, AL
System Name | Watermark |
---|---|
Processor | Athlon II X4 620 @3.3GHZ V1.4250 |
Motherboard | ASRock A780GXE/128 |
Cooling | XIGMATEK HDT-S963 | 4 Blue LED 120mm Fans 1 Regular 120mm |
Memory | G.SKILL 4GB (2 x 2GB) @850MHZ |
Video Card(s) | Sapphire 6850 1GB (@stock) |
Storage | 320GB OS | 160GB Storage |
Display(s) | ASUS VH236H 23" 1920x1080 |
Case | COOLER MASTER Centurion 590 (With Side Panel Window) |
Audio Device(s) | Onboard |
Power Supply | Rosewill 600W 12V Rail@44 |
Software | Windows 7 Ultimate 64-Bit Edition |
before you read this (I'm totally new at this whole Dual Booting thing) so don't hammer on me.
hi there,
installed Windows 7 Build 7100. eh... works great and looks wonderful but i have a few issues here. i can't seem to boot into Windows 7 without setting my Windows 7 Install Files Partition to Active in the Disk Management within Vista. when i restart the Boot Manager comes up and i am able to boot into Windows 7. now if i wanted to boot back into Vista i would have to active the Partition within Windows 7 and restart. all i'm wanting is to be able to boot from Vista and Windows 7 from the Boot Manager without having any errors with Windows 7 while accepting to Boot. i get a missing /ntldr File...
i have downloaded easyBCD and VistaBootPRO. i find both programs are way similar and do the same jobs. with vistaBootPRO it show Windows 7 and the Windows 7 Install Files Partitions have no direct path to any boot file thus here's the problem/issue of not it letting me boot. what do i have config'ed wrong?
Image of the entry for Windows 7 and Windows 7 Install Partition under VistaBootPRO
Note: i have added both the Windows 7 and Windows 7 Install Files Entries.
Here's the Disk Management screen shot in Vista
hi there,
installed Windows 7 Build 7100. eh... works great and looks wonderful but i have a few issues here. i can't seem to boot into Windows 7 without setting my Windows 7 Install Files Partition to Active in the Disk Management within Vista. when i restart the Boot Manager comes up and i am able to boot into Windows 7. now if i wanted to boot back into Vista i would have to active the Partition within Windows 7 and restart. all i'm wanting is to be able to boot from Vista and Windows 7 from the Boot Manager without having any errors with Windows 7 while accepting to Boot. i get a missing /ntldr File...
i have downloaded easyBCD and VistaBootPRO. i find both programs are way similar and do the same jobs. with vistaBootPRO it show Windows 7 and the Windows 7 Install Files Partitions have no direct path to any boot file thus here's the problem/issue of not it letting me boot. what do i have config'ed wrong?
Image of the entry for Windows 7 and Windows 7 Install Partition under VistaBootPRO
Note: i have added both the Windows 7 and Windows 7 Install Files Entries.
Here's the Disk Management screen shot in Vista