MxPhenom 216
ASIC Engineer
- Joined
- Aug 31, 2010
- Messages
- 12,945 (2.59/day)
- Location
- Loveland, CO
System Name | Ryzen Reflection |
---|---|
Processor | AMD Ryzen 9 5900x |
Motherboard | Gigabyte X570S Aorus Master |
Cooling | 2x EK PE360 | TechN AM4 AMD Block Black | EK Quantum Vector Trinity GPU Nickel + Plexi |
Memory | Teamgroup T-Force Xtreem 2x16GB B-Die 3600 @ 14-14-14-28-42-288-2T 1.45v |
Video Card(s) | Zotac AMP HoloBlack RTX 3080Ti 12G | 950mV 1950Mhz |
Storage | WD SN850 500GB (OS) | Samsung 980 Pro 1TB (Games_1) | Samsung 970 Evo 1TB (Games_2) |
Display(s) | Asus XG27AQM 240Hz G-Sync Fast-IPS | Gigabyte M27Q-P 165Hz 1440P IPS | Asus 24" IPS (portrait mode) |
Case | Lian Li PC-011D XL | Custom cables by Cablemodz |
Audio Device(s) | FiiO K7 | Sennheiser HD650 + Beyerdynamic FOX Mic |
Power Supply | Seasonic Prime Ultra Platinum 850 |
Mouse | Razer Viper v2 Pro |
Keyboard | Razer Huntsman Tournament Edition |
Software | Windows 11 Pro 64-Bit |
So i finally decided to start overclocking my 2500k after using it for about 3 weeks on stock settings.
So far my settings are
Speedstep: Disabled
Turbo Mode: Disabled
all C States: Enabled
Spread Spectrum: Disabled
Core Ratio/multi: 45
BCLk: the norm 100
Core Voltage: 1.3v
vdimm: 1.5
LLC: Level 2(will change it back to level 5)
PLL: 1.832
VTT: 1.125
So Far im doing prime blend test right now with these settings and watching CPUz and the clock and it doesnt want to actually get toe 45x multi even with 100% load from Prime. but so far so good temps are sitting around 50c
My idea around keeping the C states enabled is because i dont want to waste power and voltage and such when im just messing around in idle browsing the web. Once i go into gaming or whatever benchmakrs i want it to climb to 4.5 or whatever clock i end up stopping at.
EDIT: i guess i should probably enable speedstep because i noticed at idle(1.6ghz) the voltage was still 1.3 that i set in the bios for the 4.5GHZ
So far my settings are
Speedstep: Disabled
Turbo Mode: Disabled
all C States: Enabled
Spread Spectrum: Disabled
Core Ratio/multi: 45
BCLk: the norm 100
Core Voltage: 1.3v
vdimm: 1.5
LLC: Level 2(will change it back to level 5)
PLL: 1.832
VTT: 1.125
So Far im doing prime blend test right now with these settings and watching CPUz and the clock and it doesnt want to actually get toe 45x multi even with 100% load from Prime. but so far so good temps are sitting around 50c
My idea around keeping the C states enabled is because i dont want to waste power and voltage and such when im just messing around in idle browsing the web. Once i go into gaming or whatever benchmakrs i want it to climb to 4.5 or whatever clock i end up stopping at.
EDIT: i guess i should probably enable speedstep because i noticed at idle(1.6ghz) the voltage was still 1.3 that i set in the bios for the 4.5GHZ