Someone at XS asked me for an overview of how the wireless networking and control was set up in this machine. Since I took the time to answer him there, I thought I'd post it here as well for those that might be interested.
Okay, here's a brief overview of the wireless networking and monitoring setup. It's sometimes a little hard to wrap your head around, but I'll try and give a clear explanation.
I've basically got 3 complete computer systems in this case. I've got the main system consisting of the Asus matx board and associated components. Then I've got a Via pico-itx system acting as an always-on file server, and information monitor. Finally, I've got the Viliv UMPC that sits on the front of the case. These 3 systems are connected by both an internal ethernet hub, and an Asus wireless access point. The wireless network is used for information sharing and control by the Viliv. The Viliv is obviously a wireless only connection, but the other systems can connect either wired or wireless, and be independent of any other system.
Since the pico is always on, it serves to relay most of the system information. It will be attached to an Aquaero and Multiswitch, which in turn is responsible for all watercooling, temp sensors, and lighting. It will also allow me to turn the main system on and off through the Viliv. All the information I need on the Viliv will be relayed using a Samurize front end. Samurize's own network monitoring functionality, as well as the Aquaero software will allow for real time monitoring of the pico and main system functions. Now, of course since the Viliv is wireless, and always connected to the OSIDIAS network, I can just detach it from the case and use it as a remote.
Does that help explain things a little? Feel free to ask if it doesn't.