rjkoneill
New Member
- Joined
- Oct 27, 2009
- Messages
- 34 (0.01/day)
Processor | Intel i7 3820 |
---|---|
Motherboard | Gigabyte X79 UD7 OC |
Cooling | Watercooling |
Memory | 16GB Crucial Ballistix Elite 2000MHz |
Video Card(s) | Nvidia GTX 590 |
Storage | 2X Crucial M4 128GB Solid State Drives |
Display(s) | Dell Ultrasharp U3011 30" |
Case | Silverstone TJ11 Custom Modded |
Audio Device(s) | Asus Xonar D2X |
Power Supply | Corsair AX750 Modular |
Software | Windows 7 Ultimate X64 |
my last TJ07 thread here, needed a revamp
props to Gigabyte, Corsair and Intel for the assistance
Component List
Case
Silverstone TJ07B-W
6X Xigmatek Blueline 120mm Fans
System
Intel Core I7 970 Gulftown Processor
Gigabyte X58A UD7 Motherboard
Corsair Dominator GT 2000MHz CAS 7 Memory
Asus Nvidia GeForce GTX 480
2X Intel X25-M Mainstream 160GB Solid State Hard Drive
Asus Xonar D2X 7.1 PCI-Express Sound Card
Corsair HX 850W Power Supply
Watercooling
EK Supreme HF Full Nickel CPU Block
EK Gigabyte X58 UD7 Full Cover Nickel Plexi Waterblock Kit
EK FC-480 Nickel Plexi Waterblock
EK FC-480 Nickel Backplate
Swiftech Laing D5 Vario MCP655 12V DC Pump
Bitspower D5 Matt Black Mod Kit
Bitspower D5 V2 Pump Top
EK Multioption Reservoir 250 rev.2
ThermoChill PA120.4 Quad - 480 (15mm)
Thermochill PA120.2 Dual - 240 (15mm)
4X Meters Tygon 7/16" ID - 5/8" OD Clear Tubing
2x Litre FluidXP EcoEarth Blue
Bitspower
20X Bitspower Black Sparkle G1/4" High Flow 7/16" ID 5/8" OD Compression Fittings
4X Bitspower Black Sparkle 45 degree Rotary G 1/4 adapter
1X Bitspower Black Sparkle G1/4 - 90 Degree Rotary Adapter
2X Bitspower Black Sparkle G 1/4 - 90 Degree Dual Rotary Adapter
6X Bitspower Black Sparkle G1/4" Stop Fitting
Mods
480mm Quad Radiator Stand
30X Meter 4mm Black Cable Braid
15X Meter 4mm Blue Cable Braid
2.5X Meter Black 2:1 Heatshrink
Tinted Side panel Window
Tinted Roof panel Window
Chilled PC Blank TJ07 Rear Panel, fanless Powdercoated Satin Black
Chilled PC Blank TJ07 Mid Plate Panel Powdercoated Satin Black
after some very saddening news from Murdermod that i wont be getting my light panel any time soon, I have decided to go ahead with my rebuild.
the panel can go in when it arrives. if it arrives
I would like to thank my sponsor...
Peroni, without which this build would not be possible
out to my shed, where dust reigns supreme!
taking the system apart.
mess
480 epicness
rock solid, and indeed, heart touching
picture does not do this justice.
more mess
refreshments - Peroni #2
my fantastic new D5 [pump of champions]
my tinted top panel that didnt fit. the supplier of this item is very much in my bad books. I had to sand it down to fit.
Meg was not impressed
first ubing route, wasnt too happy with this layout
the big white tube going up to the top looks poor and i need to sort it
"Goodbye EK Multioption Res 250 Version 1"
"Oh Hello EK Multioption Res 250 Version 2"
Pump in its place
coming together after lots of swearing
made a couple of minor changes this week
sold my 480 blocks off to someone and got the nickel plexi version so the blocks match my new motherboard
got NathWraith to order me one of these beauties too
looking at a few performance upgrades too but i need to do some more testing and research.
the front of the case is going to soon change a bit too
i am putting the doube thermochill in the front of the case to aid airflow and add some extra cooling to the loop [fermi on a single loop is a very very silly idea]
the front of the case will soon be filled with these lian li bezels
they should allow for a bit of airflow over the rad.
props to Gigabyte, Corsair and Intel for the assistance
Component List
Case
Silverstone TJ07B-W
6X Xigmatek Blueline 120mm Fans
System
Intel Core I7 970 Gulftown Processor
Gigabyte X58A UD7 Motherboard
Corsair Dominator GT 2000MHz CAS 7 Memory
Asus Nvidia GeForce GTX 480
2X Intel X25-M Mainstream 160GB Solid State Hard Drive
Asus Xonar D2X 7.1 PCI-Express Sound Card
Corsair HX 850W Power Supply
Watercooling
EK Supreme HF Full Nickel CPU Block
EK Gigabyte X58 UD7 Full Cover Nickel Plexi Waterblock Kit
EK FC-480 Nickel Plexi Waterblock
EK FC-480 Nickel Backplate
Swiftech Laing D5 Vario MCP655 12V DC Pump
Bitspower D5 Matt Black Mod Kit
Bitspower D5 V2 Pump Top
EK Multioption Reservoir 250 rev.2
ThermoChill PA120.4 Quad - 480 (15mm)
Thermochill PA120.2 Dual - 240 (15mm)
4X Meters Tygon 7/16" ID - 5/8" OD Clear Tubing
2x Litre FluidXP EcoEarth Blue
Bitspower
20X Bitspower Black Sparkle G1/4" High Flow 7/16" ID 5/8" OD Compression Fittings
4X Bitspower Black Sparkle 45 degree Rotary G 1/4 adapter
1X Bitspower Black Sparkle G1/4 - 90 Degree Rotary Adapter
2X Bitspower Black Sparkle G 1/4 - 90 Degree Dual Rotary Adapter
6X Bitspower Black Sparkle G1/4" Stop Fitting
Mods
480mm Quad Radiator Stand
30X Meter 4mm Black Cable Braid
15X Meter 4mm Blue Cable Braid
2.5X Meter Black 2:1 Heatshrink
Tinted Side panel Window
Tinted Roof panel Window
Chilled PC Blank TJ07 Rear Panel, fanless Powdercoated Satin Black
Chilled PC Blank TJ07 Mid Plate Panel Powdercoated Satin Black
after some very saddening news from Murdermod that i wont be getting my light panel any time soon, I have decided to go ahead with my rebuild.
the panel can go in when it arrives. if it arrives
I would like to thank my sponsor...
Peroni, without which this build would not be possible
out to my shed, where dust reigns supreme!
taking the system apart.
mess
480 epicness
rock solid, and indeed, heart touching
picture does not do this justice.
more mess
refreshments - Peroni #2
my fantastic new D5 [pump of champions]
my tinted top panel that didnt fit. the supplier of this item is very much in my bad books. I had to sand it down to fit.
Meg was not impressed
first ubing route, wasnt too happy with this layout
the big white tube going up to the top looks poor and i need to sort it
"Goodbye EK Multioption Res 250 Version 1"
"Oh Hello EK Multioption Res 250 Version 2"
Pump in its place
coming together after lots of swearing
made a couple of minor changes this week
sold my 480 blocks off to someone and got the nickel plexi version so the blocks match my new motherboard
got NathWraith to order me one of these beauties too
looking at a few performance upgrades too but i need to do some more testing and research.
the front of the case is going to soon change a bit too
i am putting the doube thermochill in the front of the case to aid airflow and add some extra cooling to the loop [fermi on a single loop is a very very silly idea]
the front of the case will soon be filled with these lian li bezels
they should allow for a bit of airflow over the rad.
Last edited: