TPU's WCG/BOINC Team

[PP Mguire]

Well i got my i5 crunching at a clean 4ghz. How can you view your scores and compare to other team members on the website? Its alot different than F@H or S@H.

 

[p_o_s_pc]

Well i got my i5 crunching at a clean 4ghz. How can you view your scores and compare to other team members on the website? Its alot different than F@H or S@H.

http://stats.free-dc.org/stats.php?page=team&proj=bwcg&team=22175
that should be what your looking for... if not then just

BTW after overclocking my x2 4200+ to 3ghz(going to try higher later on it and the 5kBE) my points seem to be better

 

[vaiopup]

Lot's of stats links in [Ion] checklist.

http://forums.techpowerup.com/showthread.php?t=106593

 

[Velvet Wafer]

http://stats.free-dc.org/stats.php?page=team&proj=bwcg&team=22175
that should be what your looking for... if not then just

BTW after overclocking my x2 4200+ to 3ghz(going to try higher later on it and the 5kBE) my points seem to be better

i can see points change recognizably every 30-50 mhz more.
my 955 also got more points,after adding ddr3 and more NB

 

[PP Mguire]

http://stats.free-dc.org/stats.php?page=team&proj=bwcg&team=22175
that should be what your looking for... if not then just

BTW after overclocking my x2 4200+ to 3ghz(going to try higher later on it and the 5kBE) my points seem to be better

3ghz milestone on a Brisbane X2 is a good one. And folding stable too is really good. My X2 4200+ (939) hit a volt wall at 2.95

I hope to get a sapphire badge in due time. Ive always been one to fold even when i had crap to fold on but heat and electricity got the better of me. Now that i dont worry about either i can fold on all my stuff

 

[p_o_s_pc]

3ghz milestone on a Brisbane X2 is a good one. And folding stable too is really good. My X2 4200+ (939) hit a volt wall at 2.95

I hope to get a sapphire badge in due time. Ive always been one to fold even when i had crap to fold on but heat and electricity got the better of me. Now that i dont worry about either i can fold on all my stuff

my X2 4200+ is a Brisbane G2 thats 3ghz@1.36v right now testing it at 3063mhz@1.36v(63mhz bump but still should give slightly more points)what kind of volts did your 939 4200 run?

i can see points change recognizably every 30-50 mhz more.
my 955 also got more points,after adding ddr3 and more NB

so 63mhz should be noticeable then. if i can get both of them up alittle higher that would great.. time to start testing the 5kbe to see where i can get it

 

[Velvet Wafer]

my X2 4200+ is a Brisbane G2 thats 3ghz@1.36v right now testing it at 3063mhz@1.36v(63mhz bump but still should give slightly more points)what kind of volts did your 939 4200 run?


so 63mhz should be noticeable then. if i can get both of them up alittle higher that would great.. time to start testing the 5kbe to see where i can get it

i hitted 3.1 stable-3.2 benching on a 4400+ and 3.38 stable,3.48 benching on my 5000+
im interested to see what yours may do.

 

[p_o_s_pc]

i hitted 3.1 stable-3.2 benching on a 4400+ and 3.38 stable,3.48 benching on my 5000+
im interested to see what yours may do.

4200+ 3063@1.36v 5kbe 3020@1.36v not willing to give more voltage to them as that is the max i like to run 24/7

 

[Velvet Wafer]

4200+ 3063@1.36v 5kbe 3020@1.36v not willing to give more voltage to them as that is the max i like to run 24/7

if they dont cook, they wont be damaged from 1.44,even up to 1.5 (not more) either. imagine what i pump in a 45nm quad

 

[p_o_s_pc]

if they dont cook, they wont be damaged from 1.44,even up to 1.5 (not more) either. imagine what i pump in a 45nm quad

i don't think the voltage/mhz ratio is worth it after 1.35-1.37v it takes too much voltage for just a small mhz gain IMHO. I will stick with ~3.1ghz on them. (strange that the x2 4200+ clocks better then the 5kBE)

 

[Velvet Wafer]

i don't think the voltage/mhz ratio is worth it after 1.35-1.37v it takes too much voltage for just a small mhz gain IMHO. I will stick with ~3.1ghz on them. (strange that the x2 4200+ clocks better then the 5kBE)

if youre about economy,youre right
i dont find this very strange, you probably have a good 4200+ and a not so good 5000+, chip quality is always luck, if you dont buy 20 procs to pick

 

[vaiopup]

Welcome to the team SK-1

 

[theonedub]

So far my points have actually gone down since switching to Win 7 Pro x64, presumably because the WUs are pending validation and I lost some in-progress WUs when I reinstalled.

Yesterday the Q9550 put up 3,109 Boinc, which combined with my E2200's 509, resulted in my most productive WCG day ever (iirc). Its on a tear right now

 

[3dsage]

Yesterday the Q9550 put up 3,109 Boinc, which combined with my E2200's 509, resulted in my most productive WCG day ever (iirc). Its on a tear right now

Nice man, im looking forward to getting over 3K PPD, nice stuff:toast

 

[[Ion]]

Yesterday the Q9550 put up 3,109 Boinc, which combined with my E2200's 509, resulted in my most productive WCG day ever (iirc). Its on a tear right now

Awesome, yesterday was also one of my more productive days (3,036), which is #4 for me. 4 more points and it would be #3
Congrats on your highest day ever yesterday! I really need to step up production, but I don't have any ways to do so

 

[HammerON]

Good job crunchers

 

[msgclb]

I thought I would have a AMD Quad-Core up tonight but the motherboard I have available has only 1 PS/2 port and isn't compatible with my KVM. Even if I had a Male USB to Female PS/2 Mouse adapter I don't know if that would work. Maybe Mike (Mike047) would know because that's were I got it. Mike this KVM has worked great until I tried to use this Asus board.

In the past I could go up the street and buy almost any computer part that I needed but all the local computer stores have gone the way of the Dodo bird.

This erks me so much that I'm going to go get drunk!

 

[vaiopup]

Welcome to the team troubled

 

[PP Mguire]

i don't think the voltage/mhz ratio is worth it after 1.35-1.37v it takes too much voltage for just a small mhz gain IMHO. I will stick with ~3.1ghz on them. (strange that the x2 4200+ clocks better then the 5kBE)

I ran my 4200+ 24/7 at 1.6v to get 2.95ghz stable 24/7. X2 max safe temps is 1.55v btw.

 

[Mindweaver]

Yesterday the Q9550 put up 3,109 Boinc, which combined with my E2200's 509, resulted in my most productive WCG day ever (iirc). Its on a tear right now

Nice! I don't think my Q9550 has put up over 2600 points.. What is yours clocked at?

I thought I would have a AMD Quad-Core up tonight but the motherboard I have available has only 1 PS/2 port and isn't compatible with my KVM.

Just use VNC to connect to it. I use to use KVM but i've moved on to Ultra VNC to monitor/connect via remote desktop. Give it a try, it's easy to use and connect to by ip or host name.

 

[theonedub]

Nice! I don't think my Q9550 has put up over 2600 points.. What is yours clocked at?

Its only @ 3.4 on Win7 Prox64 Im pretty satisfied with its production.

 

[Mindweaver]

Its only @ 3.4 on Win7 Prox64 Im pretty satisfied with its production.

Yea that's what mines @. I can take it to 3.8GHz, but not able to crunch at 100%. So, yea i'm satisfied with 3.4GHz as well.

 

[p_o_s_pc]

I ran my 4200+ 24/7 at 1.6v to get 2.95ghz stable 24/7. X2 max safe temps is 1.55v btw.

i thought 1.4v was the max "safe" for the 65nm chips when being used for folding/crunching 24/7@100% and 1.45v for "normal" use aslong as temps run under 60c? Is this correct? Thats the info i have came across over the last year or so

 

[mike047]

I thought I would have a AMD Quad-Core up tonight but the motherboard I have available has only 1 PS/2 port and isn't compatible with my KVM. Even if I had a Male USB to Female PS/2 Mouse adapter I don't know if that would work. Maybe Mike (Mike047) would know because that's were I got it. Mike this KVM has worked great until I tried to use this Asus board.

In the past I could go up the street and buy almost any computer part that I needed but all the local computer stores have gone the way of the Dodo bird.

This erks me so much that I'm going to go get drunk!

I never had any luck getting a usb mouse and a ps2 mouse ports to work on a kvm, When I accidentally bought a mb that needed a ps2 mouse....I just bought another mouse.....keyboard and video worked OK.

 

[Velvet Wafer]

i thought 1.4v was the max "safe" for the 65nm chips when being used for folding/crunching 24/7@100% and 1.45v for "normal" use aslong as temps run under 60c? Is this correct? Thats the info i have came across over the last year or so

i would correct to 1.45 and 1.5
but this should be the end, at 1.6 it will run, but it will loose like half its lifetime (10-15 years from 20-30 or so)