TPU's WCG/BOINC Team

[GREASEMONKEY]

I don't have a home anymore. I'm kicked out but good news is i get to stay with my bro till i can get a place and my uncle is going to let me take my rigs to his house and fold/crunch on them. So i'm not going to have any good points till i get this shit taken care of. My new year isn't going great at all also to top it off i may lose my gf and i don't have a job. I'm completely fucked by the way i see it.

I'm very sorry to hear that p-o-s-pc.I hope that thing's get better for you soon.
As others have told me in the past,believe it or not,There is always a light at the end of the tunnel.As corny as it may sound.That's what you have to believe in.

 

[stanhemi]

sorry to hear that pos. Keep your head up

I had a difficult time recently I had to make a bankruptcy and i lost my job 2 times. I lost my apartment and my car but my situation is getting better now
They say: what does not kill us makes us stronger

 

[Chicken Patty]

Sorry to hear that Tim, i'll really like it if you share some details with us man. We can talk about this if you'd like. HOpe shit gets better for you soon man

 

[Velvet Wafer]

I don't have a home anymore. I'm kicked out but good news is i get to stay with my bro till i can get a place and my uncle is going to let me take my rigs to his house and fold/crunch on them. So i'm not going to have any good points till i get this shit taken care of. My new year isn't going great at all also to top it off i may lose my gf and i don't have a job. I'm completely fucked by the way i see it.

oh man....what the fuck happened? you really need to tell me, i feel like i have been blinded to not feel that youre in such an assfuck-situation
youre not alone POS... it also crackles for me and my gf atm...
i REALLY feel with you now.

 

[theonedub]

Def need some more info on what happened POS, if you feel like sharing.

On a lighter note, after reading about everyone getting a decent OC out of their 965 BE on stock volts I decided to raise the multi from 17 to 18 just to see if it would be stable. 1hr and 30min of OCCT Linpack later I have my 965BE @ 3.6 crunching hard with no vcore increase. Its WCG benchmarks are much closer to my Q9550 now

 

[[Ion]]

Sorry to hear that POS, but at least you have a place to stay ATM and a place to store the rigs
Best of luck to you in your search for a new residence

 

[p_o_s_pc]

It sounds like you are going through some rough times~
Why did you get kicked out (if you don't mind me asking)?

it had to do with my step mom just being a bitch. but things are worked out for now. Long story short it took some hours of yelling and a hand to her face and i have a place to live till i'm 18 then its out the door....
its a mess that that i'm not getting into...

also the rigs are back up and running

 

[Chicken Patty]

it had to do with my step mom just being a bitch. but things are worked out for now. Long story short it took some hours of yelling and a hand to her face and i have a place to live till i'm 18 then its out the door....
its a mess that that i'm not getting into...

also the rigs are back up and running

Good to hear Tim

 

[p_o_s_pc]

I'm not back at full force yet.. I still am short 1 rig. I got the X2 4200+ and clocked it to 3.1ghz without a problem but i left it at another house along with the GTX260(and other parts PSu,HDD,case) i'm going to try to get that ASAP

here is what i have/will have
Phenom x4 9500
AII X2 240@3.6ghz
X2 5kBE@3ghz
X2 4200+@3.1ghz
E7200@3.6ghz
E1500@2.8ghz
then a handful of P4s. I had to take another P4 off line as the PSU was running really hot and smelled bad. If i get around to it i will drop my 350w antec in it.

@CP
The 350w Antec that was running the E7200+8800GT has been replaced by a OCZ modX 550w

 

[Chicken Patty]

I'm not back at full force yet.. I still am short 1 rig. I got the X2 4200+ and clocked it to 3.1ghz without a problem but i left it at another house along with the GTX260(and other parts PSu,HDD,case) i'm going to try to get that ASAP

here is what i have/will have
Phenom x4 9500
AII X2 240@3.6ghz
X2 5kBE@3ghz
X2 4200+@3.1ghz
E7200@3.6ghz
E1500@2.8ghz
then a handful of P4s. I had to take another P4 off line as the PSU was running really hot and smelled bad. If i get around to it i will drop my 350w antec in it.

@CP
The 350w Antec that was running the E7200+8800GT has been replaced by a OCZ modX 550w

Your hard work and dedication is always appreciated bro. Glad you have you on the team dude

Is anything on the crunchers helping crunchers list changing?

 

[p_o_s_pc]

Your hard work and dedication is always appreciated bro. Glad you have you on the team dude

Is anything on the crunchers helping crunchers list changing?

you can take everything but the ram off. I still need some DDR2

 

[[Ion]]

I'm not back at full force yet.. I still am short 1 rig. I got the X2 4200+ and clocked it to 3.1ghz without a problem but i left it at another house along with the GTX260(and other parts PSu,HDD,case) i'm going to try to get that ASAP

here is what i have/will have
Phenom x4 9500
AII X2 240@3.6ghz
X2 5kBE@3ghz
X2 4200+@3.1ghz
E7200@3.6ghz
E1500@2.8ghz
then a handful of P4s. I had to take another P4 off line as the PSU was running really hot and smelled bad. If i get around to it i will drop my 350w antec in it.

@CP
The 350w Antec that was running the E7200+8800GT has been replaced by a OCZ modX 550w

Wow, that's a lot of rigs you have there!
If you want, I can fire up my PPD estimator and give you an estimate for each of them (I still haven't figured out yet how to get it to run on computers without VX2008)

 

[p_o_s_pc]

Wow, that's a lot of rigs you have there!
If you want, I can fire up my PPD estimator and give you an estimate for each of them (I still haven't figured out yet how to get it to run on computers without VX2008)

that would be great just so you know the X4 9500 is stock

btw did you get your Corsair CX400w yet? I got mine and its happily running the E1500+8800GT but its putting out alittle more heat then i would like but doesn't seem to be a problem

 

[[Ion]]

I'm not back at full force yet.. I still am short 1 rig. I got the X2 4200+ and clocked it to 3.1ghz without a problem but i left it at another house along with the GTX260(and other parts PSu,HDD,case) i'm going to try to get that ASAP

here is what i have/will have
Phenom x4 9500
AII X2 240@3.6ghz
X2 5kBE@3ghz
X2 4200+@3.1ghz
E7200@3.6ghz
E1500@2.8ghz
then a handful of P4s. I had to take another P4 off line as the PSU was running really hot and smelled bad. If i get around to it i will drop my 350w antec in it.

@CP
The 350w Antec that was running the E7200+8800GT has been replaced by a OCZ modX 550w

Phenom X4: ~975
A2 X2: ~975
X2 5K BE: ~800
X2 4200+: ~800
E7200: ~1100
E1500: ~800

I don't have any estimation techniques for the Athlon II X2, so I used the numbers for a Phenom II X2 at the same speed. For the A64 X2s, I used the Phenom II X2 estimation, and then subtracted a bit. For the E1500, I used the estimation for the Conroe CPUs, and subtracted 10%.

If you wouldn't mind PM'ing me PPD numbers for the 3 X2s and the E1500 once everything is up and running reliably, I'll put estimators for those in my calculator as well.

BTW, I assumed that all were running a 32-bit OS, PPD should be ~10% higher on x64

EDIT: Yep, I got the CX400w about 10 days ago, and it's been running fine 24/7 since then. Time to go update the system specs

 

[p_o_s_pc]

I will PM you the info after things get worked out thanks for the idea of the points. I am running 64bit OS on all of them but the X2 5kBE

 

[p_o_s_pc]

is it possible to remove the rigs name from the stats that are no longer running or that are from another windows Install?

 

[[Ion]]

is it possible to remove the rigs name from the stats that are no longer running or that are from another windows Install?

Unfortunately, no, I currently have my main rig showing up at least 4 times from various OS installs, and the old laptop at least twice

 

[p_o_s_pc]

Unfortunately, no, I currently have my main rig showing up at least 4 times from various OS installs, and the old laptop at least twice

i have reinstalled the OS many times on all of my rigs so its showing my rigs alot

 

[Velvet Wafer]

Unfortunately, no, I currently have my main rig showing up at least 4 times from various OS installs, and the old laptop at least twice

love your thermonuclear avatar
own one myself

 

[ERazer]

Well got my 4th cruncher up and running stable for a week now x4 620 non-OC around 1200-1500 ppd, still wishing for i7 for my next build

 

[Mindweaver]

My ram came in today! So far, I've got the Q9550 @ 3.6GHz with 1700MHz fsb and RAM @ 851MHz. It's rated 1066MHz, but I want to put a 60mm fan on before I push it.

 

[[Ion]]

love your thermonuclear avatar
own one myself

Thanks! I decided I was due for a new avatar, so I picked it out.

Well got my 4th cruncher up and running stable for a week now x4 620 non-OC around 1200-1500 ppd, still wishing for i7 for my next build

If you wouldn't mind, could you PM me the exact PPD you are getting in ~10 days once things have stabilized out so I could include an Athlon II X4 section for my PPD estimator?

My ram came in today! So far, I've got the Q9550 @ 3.6GHz with 1700MHz fsb and RAM @ 851MHz. It's rated 1066MHz, but I want to put a 60mm fan on before I push it.


http://img.techpowerup.org/100104/Q9550@3.6GHz341.jpg

Awesome!

 

[Chicken Patty]

Guys, as of now I have taken my C2D cruncher offline for ever. That was a rig I had put together with spare parts from a buddy, however his brother needs a PC and he's asking for it. Right now the only thing crunching for me is the QX9650 rig, and the PH II rig when it arrives sometime this week. My numbers will be much lower even when the PH II comes online, but I'll still be crunching

 

[p_o_s_pc]

Guys, as of now I have taken my C2D cruncher offline for ever. That was a rig I had put together with spare parts from a buddy, however his brother needs a PC and he's asking for it. Right now the only thing crunching for me is the QX9650 rig, and the PH II rig when it arrives sometime this week. My numbers will be much lower even when the PH II comes online, but I'll still be crunching

sorry that you are short another rig but atleast you are still crunching

 

[KieX]

Every little helps