faraprejudecai
New Member
- Joined
- Oct 20, 2008
- Messages
- 5 (0.00/day)
To view this case mod, go here.
Specs:
Asus Maximus Formula custom WC
Q6600 2.4 GHz currently running @ 3.8GHz
2 GB Mushkin @ 1066MHz
2,32 TB HDD
BFG 8800 GT OC2 with Thermalright HR03GT radiator
Custom WC 1 loop (1xEK-DDC X-RES 140 reservoir+1x waterpomp Laing 12V DDC-1 Plus+ (ULTRA) --> First Alphacool NexXxoS Xtreme II, Rev 2 radiator 3x120mm+3 fansxRecom RC-12025M-BL-LED silent 13dB @1000 rpm --> SouthBridge EK NB/SB ASUS 1 - Acetal --> NorthBridge EK NB/SB ASUS 4 --> Mosfet 1 EK Mosfet ASUS 3a - Acetal --> Mosfet 2 EK Mosfet ASUS 3a - Acetal --> Second Alphacool NexXxoS Xtreme II, Rev 2 radiator 3x120mm+3 fansxRecom RC-12025M-BL-LED silent 13dB @1000 rpm --> 1xAlphacool NexXxoS X²+ HIGHFLOW Socket 775 --> then back into reservoir.
Sirtec HPC-620 PSU
Mods:
I built my own case from zero... yet unfinished. I needed a custom case form my 2 x (3x120) radiators. And I hate tower cases since my BFG GTX280 OC broke during a transport inside that damn Antec P182 case. Temps... so far: idle: 31-35, full load (Prime95
): 50-58 Celsius degrees @ 22 Celsius degrees environment. Case specs: 430 mm depth x 340 mm wide x 430 mm height. Add +10mm exterior plastic case which is not mounted, nor build.
One of these days I'll finish it.
Specs:
Asus Maximus Formula custom WC
Q6600 2.4 GHz currently running @ 3.8GHz
2 GB Mushkin @ 1066MHz
2,32 TB HDD
BFG 8800 GT OC2 with Thermalright HR03GT radiator
Custom WC 1 loop (1xEK-DDC X-RES 140 reservoir+1x waterpomp Laing 12V DDC-1 Plus+ (ULTRA) --> First Alphacool NexXxoS Xtreme II, Rev 2 radiator 3x120mm+3 fansxRecom RC-12025M-BL-LED silent 13dB @1000 rpm --> SouthBridge EK NB/SB ASUS 1 - Acetal --> NorthBridge EK NB/SB ASUS 4 --> Mosfet 1 EK Mosfet ASUS 3a - Acetal --> Mosfet 2 EK Mosfet ASUS 3a - Acetal --> Second Alphacool NexXxoS Xtreme II, Rev 2 radiator 3x120mm+3 fansxRecom RC-12025M-BL-LED silent 13dB @1000 rpm --> 1xAlphacool NexXxoS X²+ HIGHFLOW Socket 775 --> then back into reservoir.
Sirtec HPC-620 PSU
Mods:
I built my own case from zero... yet unfinished. I needed a custom case form my 2 x (3x120) radiators. And I hate tower cases since my BFG GTX280 OC broke during a transport inside that damn Antec P182 case. Temps... so far: idle: 31-35, full load (Prime95
): 50-58 Celsius degrees @ 22 Celsius degrees environment. Case specs: 430 mm depth x 340 mm wide x 430 mm height. Add +10mm exterior plastic case which is not mounted, nor build.
One of these days I'll finish it.
Last edited by a moderator: