X800 fuses data for unlocking

[celinda]

for god sake

omfg it's awesome i just changed my card from slot and its working :
damn i m happy i didnt loose 200 $$ btw the mod failed im still @ 8 pipes , and i think i burned 1 pci-express slot , i think i'm done with x800gt overclocking
well thx to all who helped me !

 

[Sir_Solo]

Gecube X800GT 256Mb DDR3 PCI-E

What can i do with it? should i try to reconnect laser cut or the right bridge? or both?

 

[Stilt]

Gecube X800GT 256Mb DDR3 PCI-E

What can i do with it? should i try to reconnect laser cut or the right bridge? or both?

If there is any lasercuts, reconnect them.
Then you´ll have 12 pipelines. Also there is no need to update the bios since there is no pipelines hidden by the bios.

 

[Sir_Solo]

how can be done this? someone wrote that i must link the core and the pipe avoiding the laser cut by making it around it? is it true? sounds like bullshit. Dolf said about unsoldering and soldering the resistors what you thinks about it?
Thanks

 

[Stilt]

how can be done this? someone wrote that i must link the core and the pipe avoiding the laser cut by making it around it? is it true? sounds like bullshit. Dolf said about unsoldering and soldering the resistors what you thinks about it?
Thanks

If your card has a R423 core the lasercut are in the upper right corner.
I use Bison Electro silverpaint to connect the bridges. The Bison paint is designed for repairing traces, so it is the best solution. It also has almost equal condutivity compared to solder so it is far much better than a pencil.

 

[Sir_Solo]

Thanks Bro

One last think, my core and mem are both at 500 mhz by default, Ati tool showing that my mem working without artifacts at around 525mhz and my core at about 610mhz, what frequence should i choose for them when flashing my bios? And what you can say me for the resistors that Dolf mentioned about?

Thanks alot

 

[infrared]

when you're flashing your bios, it won't really matter, since the new bios will put the clock speeds to whatever the new bios was from, but you want to put your card back to stock speeds before trying it with the lazer cut reconnected, and then find the maxes again.

Good luck

 

[Mr_Torch]

Bump....... Can I get an answer W1zzard? you said in the quote fuses aren't on OLDER cards.....

My card is an X700 Pro PCIe 256 Mb and it shows it has fuses, does this posibly mean that I can unlock some pipes? Currently only has 8 pipes.

Administrator: W1zzard

Join Date: May 2004
Location: Stuttgart, Germany
Posts: 2,121

this is only for x800 series old cards dont have fuses

 

[Stilt]

Bump....... Can I get an answer W1zzard? you said in the quote fuses aren't on OLDER cards.....

ATITool can display fuses for X700 and X8x0 series cards.
RV410 core has physically only 8 pipelines and 6 vertex shader units, and you have all of them in use already. Nothing to unlock there. If you want more pipelines, get a X800 series card.

 

[manoloxxl]

omfg it's awesome i just changed my card from slot and its working :
damn i m happy i didnt loose 200 $$ btw the mod failed im still @ 8 pipes , and i think i burned 1 pci-express slot , i think i'm done with x800gt overclocking
well thx to all who helped me !

I don´t think your PCIe-Slot is burned. Just try it to put there again. Maybe it was needed to do a ForceRefresh or something like that.

 

[Mr_Torch]

ATITool can display fuses for X700 and X8x0 series cards.
RV410 core has physically only 8 pipelines and 6 vertex shader units, and you have all of them in use already. Nothing to unlock there. If you want more pipelines, get a X800 series card.

Just ordered an XFX 7800 GT ........Thank you for the reply.

 

[finaLfAntAsYpEp]

I have a Connect3d GTO, I ordered it on 11/25/03 and it arrived on 11/30/05 I've seen some people with the card saying they could unlock 16 pixel pipes a couple days later and I hope I made the cut. When looking at the my fuses and compairing it to the techpowerup fuses it didn't match so that got my hopes a little down. I've overclocked it to 540/560 and scored 5557 on 3dmark05 and I love this card compaired to my MX440... I'll show a screenshot of my fuses. I heard theres a hardmod and a lasercut? Can someone clarify this to me cause I'm not really sure what the lasercut means. I haven't tried to flash it yet cause I heard if my card isn't moddable it might ruin it.

 

[CAMsoup]

ATI winflash Blue screen

Hey guys,

I am trying to flash my 16 pipe modded card back to the dumped bios with ATI winflash. SO I downloaded ATI winflash and went to start it, but I get an error...kind of looked like the Blue screen of death. It said it had an error with the .sys file. Is there another program I can use to flash back without loosing the 16 pipes!!!!???

TIA

 

[wano]

any idea if i could ever get the extra 4 pipes with this, hardmodding, using a pencil i don´t know, but is there any way to get em?

http://img287.imageshack.us/my.php?image=dibujo1mq.jpg

bye

 

[infrared]

CAMsoup:

make a ms-dos startup disk, and download atiflash, and put that on the floppy disk. Then get the dumped bios and put that on the floppy disk, restart with the floppy disk in the drive, and it should boot from it (if not, change the boot settings in the bios) and type the following:

atiflash -f -p [yourbios.bin]

if you can't remember exactly what you called your bios, type 'dir' and hit enter and it will list all the files on the disk.

ATIFlash 3.09: http://www.techpowerup.com/downloads/get.php?id=43

 

[persi]

msi 850 pro

Please can you help me?
Can I unlock my MSI 850 Pro Vivo (it has 1.6 ns).. do you know this.. what bios?

 

[persi]

MSI 850 pro

Please can you help me?
Can I unlock my MSI 850 Pro Vivo (it has 1.6 ns).. do you know this.. what bios?

 

[persi]

Please can you help me?
Can I unlock my MSI 850 Pro Vivo (it has 1.6 ns).. do you know this.. what bios?

 

[infrared]

LOL, someone call Mr.Moderator Stat!

Here's the guide:

http://www.techpowerup.com/articles/overclocking/vidcard/100

 

[Mr_Torch]

Connect3D X800GTO , guess no unlocking pipes on this one

 

[wano]

LOL, someone call Mr.Moderator Stat!

Here's the guide:

http://www.techpowerup.com/articles/overclocking/vidcard/100

Hi again, i have a x800gto, with core r480, and everest ID it like a x850pro...
is there any way to unlock the 4 pipes? i saw that review, and later i´ll look for the laser cut in my core, but what can i do with it? and what bios should i use?

bye, sry if my english sux im from chile hehe

 

[CAMsoup]

CAMsoup:

make a ms-dos startup disk, and download atiflash, and put that on the floppy disk. Then get the dumped bios and put that on the floppy disk, restart with the floppy disk in the drive, and it should boot from it (if not, change the boot settings in the bios) and type the following:

atiflash -f -p [yourbios.bin]

if you can't remember exactly what you called your bios, type 'dir' and hit enter and it will list all the files on the disk.

ATIFlash 3.09: http://www.techpowerup.com/downloads/get.php?id=43

Thank you Infrared!!

 

[infrared]

no problem, glad you got it fixed

 

[miss piggy]

x800GT

Not sure if anything can be done with this x800GT PCIe card. It is reporting as 423 128mb. Any suggestions on where to start would be appreciated?

 

[infrared]

Yep that'd unlockable. There's 16 pipes available for that core, and there doesn't appear to be a lazer cut, so if you can find a bios for it, go ahead and get those extra pipes!

ShadowFlare is excelent at modding bioses to 16 pipes, so, if you could add your bios as an attachment in your next post, i'm sure he'll be able to help.

If your unsure about getting your bios, it's in the miscellaneous section of ATITool 'save vga bios to file'

~Simon