• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

WCG Daily Numbers

Thanks for joining!

Edit your options for your account and at the bottom is a place for WCG username.
 
Hey,
until monday my crunching will fall quite a lot(most computers will be down). As I will be doing some maintenance. But on monday I will be back :)

Bye!
 
So... I'm hardly going to break any records with my rig - but I Have joined the WCG, and .. well cant figure out how I set that in my TPU profile?

as stated by dhoshaw, go to USer CP>Options and under "Misc" there is a slot to enter your WCG name. However for it to display you need you have 100,000 BOINC points, or 700,000 WCG Points.

Hey,
until monday my crunching will fall quite a lot(most computers will be down). As I will be doing some maintenance. But on monday I will be back :)

Bye!

No biggie bro, thanks for keeping us posed. :toast: Good luck with your maintenance
 
Statistics Last Updated: 3/18/10 23:59:59 (UTC) [2 hour(s) ago]

TechPowerUp! 1,812,506


Still above 1.8 million :toast:
 
Statistics Last Updated: 3/18/10 23:59:59 (UTC) [2 hour(s) ago]

TechPowerUp! 1,812,506


Still above 1.8 million :toast:
We got people with some systems down right now for maint and such, still a good job. :toast:
 
T3h frack. eVGA motherboard on my i7 seems to have SpeedStep always on despite setting in the BIOS.. So my C0 that I just got running will be coming back down because it's not stable enough to do this. (Thing will run LinX endlessly, but wont WCG for more than a few hours.) Unless someone knows something about Windows 7 that would cause this.. =X

On the plus side, I have a D0 arriving tomorrow.. I will get my other system back up asap.

*Hopefully* when I get it all sorted I'll have n i7 at 3.6 and an i7 at 4-ish pulling some numbers in...
 
T3h frack. eVGA motherboard on my i7 seems to have SpeedStep always on despite setting in the BIOS.. So my C0 that I just got running will be coming back down because it's not stable enough to do this. (Thing will run LinX endlessly, but wont WCG for more than a few hours.) Unless someone knows something about Windows 7 that would cause this.. =X

On the plus side, I have a D0 arriving tomorrow.. I will get my other system back up asap.

*Hopefully* when I get it all sorted I'll have n i7 at 3.6 and an i7 at 4-ish pulling some numbers in...

What about at stock speeds, would it run WCG then?
 
Sadly, it does the same things.

Found some threads regarding Windows 7 power management options that can't be completely disabled unless they were disabled during the install process. 4 Hours, I'll be back. =\

Upgrading is so stressful, shoulda stayed with my AMD K6\300... :laugh:
 
Sadly, it does the same things.

Found some threads regarding Windows 7 power management options that can't be completely disabled unless they were disabled during the install process. 4 Hours, I'll be back. =\

Upgrading is so stressful, shoulda stayed with my AMD K6\300... :laugh:

:laugh::laugh:

I've been running nothing but W7 for the past year or so since the first beta was released, never have had an issue bro. Good luck man .
 
T3h frack. eVGA motherboard on my i7 seems to have SpeedStep always on despite setting in the BIOS.. So my C0 that I just got running will be coming back down because it's not stable enough to do this. (Thing will run LinX endlessly, but wont WCG for more than a few hours.) Unless someone knows something about Windows 7 that would cause this.. =X

On the plus side, I have a D0 arriving tomorrow.. I will get my other system back up asap.

*Hopefully* when I get it all sorted I'll have n i7 at 3.6 and an i7 at 4-ish pulling some numbers in...

Have you disabled C1E in the bios as well? If not you should...
 
Statistics Last Updated: 3/19/10 23:59:59 (UTC) [1 hour(s) ago]
1,767,706

:toast: :toast: :toast:
 
Statistics Last Updated: 3/19/10 23:59:59 (UTC) [1 hour(s) ago]
1,767,706

:toast: :toast: :toast:
It will come back up when everyone gets their rigs back up and running. I have one that I had to cut back to 50% load, power supply is failing. Will change it out tomorrow.
 
My new D0 is pulling 4ghz and should help a lot(in minutes).

My eVGA board and C0 are still questionable. CxE is disabled by default, I hope to get it running again(so I can monitor it) tomorrow and see what it does.
 
Run that CO at 3.8GHz with about 1.28 VCore
 
still got an i7 down. Hopefully back up by the weekend :toast:
 
CP
you have that crunching for you or someone else now?
 
Nice^^

i found that i can have mine at 70% all the time even if im gaming, and 100% when i sleep:D
 
Nice^^

i found that i can have mine at 70% all the time even if im gaming, and 100% when i sleep:D

I leave mine at 100% when i played Crysiss, still very playable. hardcore cruncha :rockout:

Thanks again dude, 1mil should be no problem now :)

no problem bro. The rig has been down for about a day now though, until I don't clear out that HDD it's not coming back up. Hopefully I'll do that by tomorrow.
 
My main rig was down most of the night, as I was in the middle of managing cables/adding another 120mm fan to it.

Should be crunching tonight at the very least 80%
 
Statistics Last Updated: 3/20/10 23:59:59 (UTC) [1 hour(s) ago]
1,704,928

:toast: :toast: :toast:
 
Seeing a bad trend here with the daily numbers:(
Lets pick it up a couple notches~
 
Seeing a bad trend here with the daily numbers:(
Lets pick it up a couple notches~

Yeah, I'm a bit disappointed honestly. Although, considering I'm not doing anything to alleviate the problem, I shouldn't be complaining. I guess it's time to do something about the problem :cool:
 
Back
Top