• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

CPU-Z AMD 1090T error?

Joined
Apr 3, 2006
Messages
833 (0.12/day)
Location
UK, Brighton
Processor 9900k @ stock (direct die)
Motherboard Aorus Master z390.
Cooling Dual Loop, Custom
Memory 16GB Corsair RGB Pro
Video Card(s) MSI RTX 2080Ti SEAHAWK EK X
Storage Samsung 960 512, Samsung 860 2TB, Sabrent Rocket 1TB
Display(s) Asus MG278Q/Acer XB270HA
Case MM U2-UFO Extended CYO
Audio Device(s) Asus Xonar Xense & AKG K550 Headphones
Power Supply Corsair HX1000i
Mouse Corsair M65 RGB Elite
Keyboard Corsair K70 mk.2 Silent
Software Win 10 Pro X64
Ok so when i open CPU-Z it show's the clock as this

wtfwtf.png


Then.
WTF-1.jpg


and keep's switching back and forth every 5/10 secs
 
Last edited:
Power saving option in the BIOS?

Why is it shown as a 1095T?
 
Power saving option in the BIOS?

Why is it shown as a 1095T?

no clue.

all power saving features disabled and ROG reports no problems.
 
800Mhz = cool and quiet.

however, the voltage hasnt dropped.


my bet is either somethings not reading right, OR, your BIOS hasnt been updated to full disable cool n quiet.
 
possibly that's why i posted in software. will post in the PII overclocker's room as well.
 
turn c1e to disabled, micro code disabled (u dont need it on)... and manually set the cpu core volts to 1.35 and set ht link to 2000mhz as well as nb link to 2000-2400mhz

been playing Dirt 2 for over an hour and ran flawless
 
800Mhz = cool and quiet.

however, the voltage hasnt dropped.


my bet is either somethings not reading right, OR, your BIOS hasnt been updated to full disable cool n quiet.

agreed. sounds exactly like c'n'q is active.
 
yep cool & quiet is enabled(though disabled in bios) :laugh:

gonna see if i can fix this.
 
Yep and "Turbo Core" is stuck on until the next bios revision.

Has it been confirmed that the next Crosshair IV bios revision will give you the ability to turn off "Turbo Core"?
 
Has it been confirmed that the next Crosshair IV bios revision will give you the ability to turn off "Turbo Core"?

Apparently that's what they are working on. Do I know for sure? No. It's something I read at XtremeSystems and I believe I read it in a review or two.
 
Why would you want to turn it off? It downclocks idle cores so it can overclock the cores in use.
 
Apparently that's what they are working on. Do I know for sure? No. It's something I read at XtremeSystems and I believe I read it in a review or two.
The newest version of AMD Overdrive has the means of turning off turbo mode even with this immature bios.... I have the task bar on and been monitoring it running multiple programs as well as a single program... the freq stays at 3.2 and all 6 cores are working under my current bios settings ;)
 
Why would you want to turn it off? It downclocks idle cores so it can overclock the cores in use.
just for testing I think he was going on about it mate..... it's like I7 turbo and there 2 pipe lines coming of a single core as threads.... same idea but different question :ohwell:
DILYSI..... translates ( drive it like you stole it) lol got it?
 
i got a question for you 6 core guys, please looky here
 
thanks angelkiller, after installing Overdrive & Turbo V, CPU-Z reports correct speed, haven't turned off turbo either. hmmmmmm
 
Back
Top