- Joined
- Jul 21, 2008
- Messages
- 5,175 (0.90/day)
| System Name | [Daily Driver] |
|---|---|
| Processor | [Ryzen 7 5800X3D] |
| Motherboard | [Asus TUF GAMING X570-PLUS] |
| Cooling | [be quiet! Dark Rock Slim] |
| Memory | [64GB Corsair Vengeance LPX 3600MHz (16GBx4)] |
| Video Card(s) | [PNY RTX 3070Ti XLR8] |
| Storage | [1TB SN850 NVMe, 4TB 990 Pro NVMe, 2TB 870 EVO SSD, 2TB SA510 SSD] |
| Display(s) | [2x 27" HP X27q at 1440p] |
| Case | [Fractal Meshify-C] |
| Audio Device(s) | [Steelseries Arctis Pro] |
| Power Supply | [CORSAIR RMx 1000] |
| Mouse | [Logitech G Pro Wireless] |
| Keyboard | [Logitech G512 Carbon (GX-Brown)] |
| Software | [Windows 11 64-Bit] |
So I finally got my new parts for the system in my specs, the mobo/ram/cpu listed being the "new parts". And of course during the upgrade ive run into a problem, my GTX 580 (With accelero extreme plus) fans wont spin. I've narrowed it down to the card/fans by plugging my GTX 470 into the 3 pin connector and booting the system only to have its fans spin fine.
I've tried the 3 pin connection to no avail, I've tried putting the 4 pin on a 3 pin (theirs no 4 pin slot besides the cpu fan on the board) to no avail, I've tried the 3/4 pin to molex converter to no avail (Albeit confusingly as I couldnt figure out which one was 7v and which one was 12v so I tried every combo). I'm outta ideas, the card worked great with my old socket 775 mobo and q9550. And I didnt short the card in the upgrade because it boots and is detected fine to the point where I can browse windows until it overheats and shuts down, the fans just wont spin. EVGA Precision shows the fan spinning at 100% or whatever I set it at, and the mobo bios shows somethign being plugged into the 3 pin sysfan and having it set at 100% yet the rpm still shows 0.
Any help is appreciated, for now I'm on the laptop.
I've tried the 3 pin connection to no avail, I've tried putting the 4 pin on a 3 pin (theirs no 4 pin slot besides the cpu fan on the board) to no avail, I've tried the 3/4 pin to molex converter to no avail (Albeit confusingly as I couldnt figure out which one was 7v and which one was 12v so I tried every combo). I'm outta ideas, the card worked great with my old socket 775 mobo and q9550. And I didnt short the card in the upgrade because it boots and is detected fine to the point where I can browse windows until it overheats and shuts down, the fans just wont spin. EVGA Precision shows the fan spinning at 100% or whatever I set it at, and the mobo bios shows somethign being plugged into the 3 pin sysfan and having it set at 100% yet the rpm still shows 0.
Any help is appreciated, for now I'm on the laptop.
