• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Where to mount a laing ddc pump

AceAdey

New Member
Joined
Jul 6, 2011
Messages
182 (0.04/day)
Location
Derby
System Name Ace
Processor i7 920 Quad Core
Motherboard Gigabyte G1 Sniper
Cooling EK Pump and EK waterblocks for EVGA Geforce 660ti FTW+ 3GB
Memory OCZ Platinum PC3 12800
Video Card(s) EVGA Geforce 660ti FTW+ 3GB
Storage 1 x Velociraptor 150gb and 2 x 300gb Vraptor
Display(s) iiyama T2250MTS
Case Coolermaster Cosmos S
Audio Device(s) Creative xi-fi
Power Supply Corsair AX760i
Software Windows 8 64
So, if I understand this correctly, you want to have the pump discharge into the RES? If so, the loop will loose so much head pressure overall. That pressure is the driving force in the loop. Reducing it to a piddle stream of nothing will make the processors run hot.

Yeah should have upgraded to Sandy-bridge. Same temps on air!
 

AceAdey

New Member
Joined
Jul 6, 2011
Messages
182 (0.04/day)
Location
Derby
System Name Ace
Processor i7 920 Quad Core
Motherboard Gigabyte G1 Sniper
Cooling EK Pump and EK waterblocks for EVGA Geforce 660ti FTW+ 3GB
Memory OCZ Platinum PC3 12800
Video Card(s) EVGA Geforce 660ti FTW+ 3GB
Storage 1 x Velociraptor 150gb and 2 x 300gb Vraptor
Display(s) iiyama T2250MTS
Case Coolermaster Cosmos S
Audio Device(s) Creative xi-fi
Power Supply Corsair AX760i
Software Windows 8 64
You know the EK res's do they work without the plastic tube inside?
 
Joined
Dec 6, 2005
Messages
10,881 (1.62/day)
Location
Manchester, NH
System Name Senile
Processor I7-4790K@4.8 GHz 24/7
Motherboard MSI Z97-G45 Gaming
Cooling Be Quiet Pure Rock Air
Memory 16GB 4x4 G.Skill CAS9 2133 Sniper
Video Card(s) GIGABYTE Vega 64
Storage Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue
Display(s) 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC*
Case Rosewill
Audio Device(s) Onboard + HD HDMI
Power Supply Corsair HX750
Mouse Logitech G5
Keyboard Corsair Strafe RGB & G610 Orion Red
Software Win 10
So, if I understand this correctly, you want to have the pump discharge into the RES? If so, the loop will loose so much head pressure overall.

Why? No matter where the pump is in relation to the loop, it all flows in series

Each component in the loop has some amount of head loss at a given flow no matter where it is... including the reservoir.
 

AceAdey

New Member
Joined
Jul 6, 2011
Messages
182 (0.04/day)
Location
Derby
System Name Ace
Processor i7 920 Quad Core
Motherboard Gigabyte G1 Sniper
Cooling EK Pump and EK waterblocks for EVGA Geforce 660ti FTW+ 3GB
Memory OCZ Platinum PC3 12800
Video Card(s) EVGA Geforce 660ti FTW+ 3GB
Storage 1 x Velociraptor 150gb and 2 x 300gb Vraptor
Display(s) iiyama T2250MTS
Case Coolermaster Cosmos S
Audio Device(s) Creative xi-fi
Power Supply Corsair AX760i
Software Windows 8 64
Its done. I have one extremely long tube. I want to disguise it. Its sat ready, having let it settle down for leaks.
 
Last edited:

AceAdey

New Member
Joined
Jul 6, 2011
Messages
182 (0.04/day)
Location
Derby
System Name Ace
Processor i7 920 Quad Core
Motherboard Gigabyte G1 Sniper
Cooling EK Pump and EK waterblocks for EVGA Geforce 660ti FTW+ 3GB
Memory OCZ Platinum PC3 12800
Video Card(s) EVGA Geforce 660ti FTW+ 3GB
Storage 1 x Velociraptor 150gb and 2 x 300gb Vraptor
Display(s) iiyama T2250MTS
Case Coolermaster Cosmos S
Audio Device(s) Creative xi-fi
Power Supply Corsair AX760i
Software Windows 8 64
Guys my loop did not work. The water got half way round, then the pump was sucking on air. So I reversed it. It has a further issue. Not sure what. It is installed according to their manual; it is below the expansion tank, it starts but is not pulling any water into the loop. I'm tired of it now. IMG-20120428-00173.jpg

IMG-20120428-00172.jpg
 

AceAdey

New Member
Joined
Jul 6, 2011
Messages
182 (0.04/day)
Location
Derby
System Name Ace
Processor i7 920 Quad Core
Motherboard Gigabyte G1 Sniper
Cooling EK Pump and EK waterblocks for EVGA Geforce 660ti FTW+ 3GB
Memory OCZ Platinum PC3 12800
Video Card(s) EVGA Geforce 660ti FTW+ 3GB
Storage 1 x Velociraptor 150gb and 2 x 300gb Vraptor
Display(s) iiyama T2250MTS
Case Coolermaster Cosmos S
Audio Device(s) Creative xi-fi
Power Supply Corsair AX760i
Software Windows 8 64
Need some advice. Started up and spins, the pump, only once has it drawn water (quite fast) into the loop. 99% of the time, nothing. No suction, just rotation.
 
Joined
May 9, 2011
Messages
1,980 (0.42/day)
Location
Mainland Britain
System Name H2o Box
Processor Intel(R) Xeon e5-2690 v2 Stock 3.300 GHz stock
Motherboard MSI X79A-G43 Plus (MS-7760) v3
Cooling CPU EK & Phobya G-Changer 360 V2.0 RAD H2o VGA "AlphaCool M18" Hybrid [pump replaced 18/8/21]
Memory G.Skill TridentX 16Gb 11-12-12-32 2T @ 1866Mhz [locked]
Video Card(s) Zotac GTX 1080ti AMP EXTREME
Storage HyperX Fury 120GB & Savage 480GB SSD, Seagate 250GB,250GB 7200rpm Kingston 64GB SSD
Display(s) Asus TUF Gaming VG32VQR 2560*1440 165Hz VA Panel
Case Corsair O-800D
Audio Device(s) Creative Sound Blaster X-Fi Titanium Fatal1ty Pro
Power Supply Be Quiet! [Dark Power Pro 11] 1200W CM replaced [7-4-2017]
Mouse Zelotes T-90
Keyboard K66 Mechanical US Layout
Software Win 10 Pro 64Bit v 20H2 / OS [build 19043.1237] WFEP 120.2212.3530.0
Need some advice. Started up and spins, the pump, only once has it drawn water (quite fast) into the loop. 99% of the time, nothing. No suction, just rotation.

Hi

Please upload a photo of the cooling loop inside your case [side angle] so that as much of the loop is exposed to view; this to aid with any assitance, as the prevous pictures are a little obscure and however helpful.

nb: the loop has an air lock, but as above this is difficult to see how at this time.

atb

Law-II
 
Last edited:

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,409 (4.46/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
that tube with the air in it, squeeze it like you would a stress ball. Clamp, release, clamp, release. You have an air lock, it happens. If squeezing the tubing doesn't help start rolling the case to the front and back, from side to side, see if you can get the flow moving.
 

AceAdey

New Member
Joined
Jul 6, 2011
Messages
182 (0.04/day)
Location
Derby
System Name Ace
Processor i7 920 Quad Core
Motherboard Gigabyte G1 Sniper
Cooling EK Pump and EK waterblocks for EVGA Geforce 660ti FTW+ 3GB
Memory OCZ Platinum PC3 12800
Video Card(s) EVGA Geforce 660ti FTW+ 3GB
Storage 1 x Velociraptor 150gb and 2 x 300gb Vraptor
Display(s) iiyama T2250MTS
Case Coolermaster Cosmos S
Audio Device(s) Creative xi-fi
Power Supply Corsair AX760i
Software Windows 8 64
This is from the side. IMG-20120429-00175.jpg I'm fearing I have made a stupid mistake now. The thing that is getting to me now is when it worked...I was fiddling with the res and BANG it quickly pulled all the water from it. I switched it off afterwards to top the res up and it has been the same, not sucking anything since.

I hope you don't mind rotating your heads or using preview here to spin it.
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,409 (4.46/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
From the tubing I can see there the board is plumbed fine. The one thing that pops out right away to me is that the CPU block is upside down. Not sure if that block is uni-directional for flow.

Is there a way you can get the whole loop in one image?
 

AceAdey

New Member
Joined
Jul 6, 2011
Messages
182 (0.04/day)
Location
Derby
System Name Ace
Processor i7 920 Quad Core
Motherboard Gigabyte G1 Sniper
Cooling EK Pump and EK waterblocks for EVGA Geforce 660ti FTW+ 3GB
Memory OCZ Platinum PC3 12800
Video Card(s) EVGA Geforce 660ti FTW+ 3GB
Storage 1 x Velociraptor 150gb and 2 x 300gb Vraptor
Display(s) iiyama T2250MTS
Case Coolermaster Cosmos S
Audio Device(s) Creative xi-fi
Power Supply Corsair AX760i
Software Windows 8 64
the CPU block is upside down

I switched it so the EK was the right way up. It has been this way up and never had a problem before now. Every time my device reboots so it could be some time before I get that pic uploaded.
 
Last edited:

AceAdey

New Member
Joined
Jul 6, 2011
Messages
182 (0.04/day)
Location
Derby
System Name Ace
Processor i7 920 Quad Core
Motherboard Gigabyte G1 Sniper
Cooling EK Pump and EK waterblocks for EVGA Geforce 660ti FTW+ 3GB
Memory OCZ Platinum PC3 12800
Video Card(s) EVGA Geforce 660ti FTW+ 3GB
Storage 1 x Velociraptor 150gb and 2 x 300gb Vraptor
Display(s) iiyama T2250MTS
Case Coolermaster Cosmos S
Audio Device(s) Creative xi-fi
Power Supply Corsair AX760i
Software Windows 8 64
Tilting the rig worked a treat. Geniuses!!!! Thanks for everyone who helped me. I will send out the 'Thanks', you know who you are.
 
Top