Your PC ATM

[GreiverBlade]

Dat HP Compaq Pentium *fap*fap*fap*

C2D E6300 please, oh well soon E6700 (tomorrow?) (not that i would pay for a DC7700P but as i said i retrieved it before the guys at my job threw it to the dump huhu... )

 

[RCoon]

C2D E6300 please, oh well soon E6700 (tomorrow?) (not that i would pay for a DC7700P but as i said i retrieved it before the guys at my job threw it to the dump huhu... )

Ah I mistook it for the DC5700 or DC7200 SFF types. My old workplace had like 50 of those things, bane of my life. Pentium 4's with that ridiculous BIOS option to turn hyperthreading on and increase the video buffer to 16mb

 

[Hood]

Top to bottom airflow? Haven't seen that before. Cool rig either way, looks crazy neat.

Yeah, I know heat rises, but it doesn't change temps significantly either way (I've tried both ways), and when I crank up those SP 120s it blows a lot of air across the motherboard and RAM. Also I figure the crossing air streams will create enough turbulence to eliminate any dead spots. Under full load my CPU stays under 60c, GPU 55-60c, mobo/chipset under 45c, even with all fans on low (40%). Thanks for the compliment on neatness, this was my first attempt at serious cable management, and it took hours to get it looking like this. Looking forward to more hours of cable-hiding fun when I install the lighting system...

 

[cantoncobaltsssc]

This is my current setup the sorry about the pics took them with my phone and lighting is bad in here.

 

[Vario]

Added this side fan to my Cosmos with a Phobya 120mm Radiator Grill, a Silverstone 120mm fan filter, and a rubber fan isolator, the fan is a Cougar.

Apologies for bad camera and lighting (GalaxyII)

 

[khemist]

Not sure what case i'm going with yet, i like the cheap nzxt 440 but it has no room for my monsoon bayres/pump.... will wait a bit and see what comes out.

I've been a Silverstone freak for a lot of years and hate to switch but i don't see any new things coming out soon.

 

[khemist]

Got the goodies!, i'm done spending for now.

 

[khemist]

Got a new windowed side panel, can't get a decent picture in this light just now.

 

[ensabrenoir]

.

....oh man..... I have an itx addiction..... cases are so cheap ...looks so cool....... no no no just bought a white node 304....finish that first...... then wait for the Node 804

 

[RCoon]

Maintenance day! Removed all the fans in my system and replaced them with SanAce server fans, running at around 12.5% - 62.25%. Also moved GPU back into PCI-E slot 1 instead of further down, as I managed to mount my cooler the other way around, and mounted a 38mm SanAce fan to the top of that!

Safety first, need these fan grills. At 4500RPM they could easily destroy my damn finger.

 

[Vario]

Hell yeah big fans for the win!

Protip: you can gut some of the lesser fans and use them as a spacer, this helps make up for the deadzone caused by the big motor.

 

[RCoon]

Protip: you can gut some of the lesser fans and use them as a spacer, this helps make up for the deadzone caused by the big motor.

Already have since I uploaded. Tore apart a crappy fan for the empty 120x25mm casing to act as a spacer!

 

[agent00skid]

Currently borrowing a 7950 for folding.

 

[dartuil]

Cool rigs here
RCoon Ill need help with air pressure in DScube.
Your top are pushing the air in? If I see well. Mine are pushing out. Better is your way or my way?

 

[d1nky]

havent posted in a while, heres my lil bench rig with a modded 6970. (thanks freedom and boss)

 

[RCoon]

havent posted in a while, heres my lil bench rig with a modded 6970. (thanks freedom and boss)

Is that PSU sat ontop of a storage heater ?

Also get those VRM's under water!

Your top are pushing the air in? If I see well. Mine are pushing out. Better is your way or my way?

Front has 230mm intake, rear has 120mm exhaust, top is 2 x 120mm exhaust. I find the top being exhaust improves my GPU temps, as they sit directly above my GPU which just pumps hot air around the case. The 230mm does more than enough in terms of intake, but I believe my case is closer to having negative pressure. CPU hits 60 degrees during P95 load (only clocked @ 3.8Ghz), and GPU hovers in the high 60's (clocked @ 1175 core), so I'd say the setup is pretty good.

 

[d1nky]

Is that PSU sat ontop of a storage heater ?

Also get those VRM's under water!

LOL yea i havent got a testbench case yet. and these mobo vrms stay cool no matter what on air. will eventually get a universal gpu/vrm block and water all these cards im collecting to bench.

just bought a corsair SSD which died randomly!!

 

[RCoon]

LOL yea i havent got a testbench case yet. and these mobo vrms stay cool no matter what on air. will eventually get a universal gpu/vrm block and water all these cards im collecting to bench.

just bought a corsair SSD which died randomly!!

Bummer, Ebuyer has M500 240GB SSD's for £80, which is some sick good pricing on that kind of storage. If the EVO wasn't available to me, I'd have bought a Crucial instead.
I got to say @the54thvoid has a really nice testbench, if I had to choose I'd probably get one like his.

universal gpu

I have one, but I'm missing the screws and what not. I can always send you it for free if you pay the postage? It's the EK VGA Supremacy.

 

[badtaylorx]

here is my latest....



---a poem, by mBTX--- (let's call it a WHYku)

Yes, Its an 8320.

Yes, It's a Gigabyte mATX.

Yes, I water cooled EVERYTHING.

NO, I do not know why!!!

 

[dartuil]

Here is my DS cube Black and the other things.

 

[Taz100420]

Heres my rig currently:





Got the Antec Twelve-Hundred case from work by cleaning the shop up some... Best thing I've gotten for free in the longest time! lol Cable management is a mess b/c I need a new psu also.

 

[ypoora1]

...HALP, i just got a Quadro FX1800 from a mate which i want to render videos on, but i want to use my Geforce GTX 660 Ti for gaming(and have the monitors hooked up to that), how do i go about doing this, since i have NO idea how this works!

 

[ypoora1]

...HALP, i just got a Quadro FX1800 from a mate which i want to render videos on, but i want to use my Geforce GTX 660 Ti for gaming(and have the monitors hooked up to that), how do i go about doing this, since i have NO idea how this works!

Scrap that, got them both running but now guess what, all OpenGL work gets done by the Quadro, immensely slowing some games down. Anyone know how to stop that?

 

[catnipkiller]

New case and tubes only paid 40$ for the case.

 

[Sassanou]

Hi !

My new mod in progress at this moment on Cosmos SE case