• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

Status
Not open for further replies.
Jimmy9303 said:
Try RealtekDriver_2019_02_25.exe @Màthair from my link that I posted a page earlier :)

It contains all effects, look:

6.0.1.8639
REALTEK EFFECTS
DOLBY HOME THEATER v4
DOLBY DIGITAL PLUS HOME THEATER
DTS INTERACTIVE IN S/PDIF
TURTLE BEACH EFFECTS WITH DTS HEADPHONE:X CUSTOM
DOLBY ATMOS
NAHIMIC 3
DTS ULTRAPC II
DTS CONNECT
ASUS HEADPHONE AMPLIFIER
SAMSUNG SOUNDALIVE 3D
NO CREATIVE EFFECTS (MBAPO)
NO CREATIVE CHAINING (MBWRP)
Click to expand...
It has an issue when in 7.1 the sound. If sound blaster 720 was supported this issue would have been easily resolved.
 
Anyone who uses Windows 7 x64 bits, and who wants to test a driver for the new sound blaster command ?; I need someone to do some tests with the SBCommand controllers and console installed in your S.O. Windows 7

I will also provide you with the software installers for the SBCommand integrated.

I have 2 controllers that I have modified from other facts for the SBX 720, and I need to know if any of the 2 created serves to operate the SB Command.
 
snorlex,a good guide to you is uninstall every old version.then reinstall new.just like kill bad create good concept^^ Works well with close to anything
 
How exactly is everyone else getting this to work? I have the Asus Prime 390-A and none of these unlocked drivers I've tried have worked. They seem to install fine, but I have no option to configure speakers and still only 2 show up when connected optical. If I do the sound test even though DTS is selected it still only does the test sound through the F + L speakers.

Is there something I'm missing?

TBH I feel like I was ripped off as the manufactures are all misleading us, my Z97-A motherboard didn't have an issue and 5.1 worked no problem with default drivers. I shouldn't even need to do this in the first place. Are all mobos with onboard doing this? I had no idea until I noticed 5.1 didn't work and googled that this is a thing these days.
 
Sporadik, you may be ok. I installed the drivers on a Gigabyte Aorus X370 (ALC1220) and have the same results as you, but games are definitely outputting 5.1 sound when I select both DTS and DD.
 
Last edited:
Vyntage said:
Sporadik, you may be ok. I installed the drivers on a Gigabyte Aorus X370 (ALC1220) and have the same results as you, but games are definitely outputting 5.1 sound when I select both DTS and DD.
Click to expand...

Thanks for the reassurance. I'll do some testing.

I tried a bunch of games and no 5.1 only stereo with optical connection
 
You had your default format set to DTS or DDL, yes?

Clipboard01.png
 
RealtekDriverSBCSADS1SZVZ are the best driver from Alan Finote who I have tested so far, but my SBZ card are still better then my ALC1220 codec.
 
Sporadik said:
Yes I have it set to DTS 5.1
Click to expand...

I don't know much about this other than I installed it and it worked, so someone above my pay grade will have to help you if they can.
 
Hi guys. I've been using a ASRock Z97 Extreme4 board with ALC1150 and it worked like a charm because it has DTS Connect license. I also used a hacked version and DD Live worked very well too.

Now, I've bought and Z570 Extreme4 that has ALC1220 and also the DTS Connect license. I need it because my Home Theater only has optical in option. Well, I tested the ASRock suggested audio driver and it doesn't show DTS Interactive 5.1 option to select as I used in previous motherboard. I noticed that with Windows default video player a video file can separete 5.1 channels but if I uses Media Player Classic only 2 channels works. I tested games and also only 2 channels works.

I installed my hacked driver and it shows DTS Connect 5.1 and DD Live 5.1 as should be but when I test a game only two channels works. I donwloaded Alan driver and the same thing happens. I noticed that when I open a game the Home Theater shows DTS 3/2.1 (that's the correct way that it display something when uses 5.1 contect). Even with hacked driver it shows DD 3/2.1. But the thing is that only 2 channels really work.

I'm frustrated becaus I've been using my Z97 without issues and now with a motherboard with DTS Connect licensed I can't use regular drivers or even hacked driver that works.
 
antonioli said:
Hi guys. I've been using a ASRock Z97 Extreme4 board with ALC1150 and it worked like a charm because it has DTS Connect license. I also used a hacked version and DD Live worked very well too.

Now, I've bought and Z570 Extreme4 that has ALC1220 and also the DTS Connect license. I need it because my Home Theater only has optical in option. Well, I tested the ASRock suggested audio driver and it doesn't show DTS Interactive 5.1 option to select as I used in previous motherboard. I noticed that with Windows default video player a video file can separete 5.1 channels but if I uses Media Player Classic only 2 channels works. I tested games and also only 2 channels works.

I installed my hacked driver and it shows DTS Connect 5.1 and DD Live 5.1 as should be but when I test a game only two channels works. I donwloaded Alan driver and the same thing happens. I noticed that when I open a game the Home Theater shows DTS 3/2.1 (that's the correct way that it display something when uses 5.1 contect). Even with hacked driver it shows DD 3/2.1. But the thing is that only 2 channels really work.

I'm frustrated becaus I've been using my Z97 without issues and now with a motherboard with DTS Connect licensed I can't use regular drivers or even hacked driver that works.
Click to expand...

Same I had no issues on my previous z97 board and didn't require modded drivers for it.
 
Last edited:
grich said:
Is there a new version of Nahimic that works without bringing the cpu usage to its knees?
Click to expand...
Tomorrow I'll be posting here.
 
www.mediafire.com

RTKAPOTool64_1.0.0.50

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

You can check your Realtek ALCXXXX capabilities with the following tool, but you cannot select capabilities you want. It show more capabilities than Realtek HDA Test utility.

Image 1.png
 
Hello. please re-upload FIXED MULTICHANNEL MODE (5.1; 7.1) for RealtekDriver_2019_02_25.exe
 
NEW REALTEK AUDIO DRIVERPACKS RELEASED
VERSION 6.0.8769.1
  • DOLBY DIGITAL LIVE (5.1 SURROUND)
  • DTS INTERACTIVE (5.1 SURROUND)
  • A-VOLUTE NAHIMIC 3 UPDATED APO VERSION TO 3.7.6.58970
  • SOUND BLASTER CONNECT
129678

ENJOY!!!!!

EDIT1: FOR SUCCESSFUL INSTALLATION OF UWP APPS, ACTIVATION OF SIDELOAD OR DEVELOPER MODES REQUIRED.
EDIT2: ACTIVATE THEM BEFORE BEGINNING INSTALLATION.

COMING SOON, DCHU VERSION!
 
Last edited:
Alan Finote said:
NEW REALTEK AUDIO DRIVERPACKS RELEASED
VERSION 6.0.8769.1
  • DOLBY DIGITAL LIVE (5.1 SURROUND)
  • DTS INTERACTIVE (5.1 SURROUND)
  • A-VOLUTE NAHIMIC 3 UPDATED APO VERSION TO 3.7.6.58970
  • SOUND BLASTER CONNECT
View attachment 129678

ENJOY!!!!!

EDIT: FOR SUCCESSFUL INSTALLATION OF UWP APPS, ACTIVATION OF SIDELOAD OR DEVELOPER MODES REQUIRED.

COMING SOON, DCHU VERSION!
Click to expand...
Alan. I'm also from Rio =)

Can you explain to me why, even my ASRock X570 Extreme4 having DTS Connect out of the box can't send 5.1 channels to my home theater that only has optical S/PDIF input? As I said in previous post, it has been working like a charm in my formar Z97 Extreme4 board that has DTS Connect too.

Obrigadão cara.
 
Last edited:
@Alan Finote Thanks for the new release. I'm using the ALC892 audio codec. I don't have any of the issues some of the other people who tried the new version has.

My issue is that the audio works fine but randomly goes very loud, something is off about the dynamic range so even if the turn the volume down on the amplifier it still has spikesof loudness.
 
Alan Finote said:
NEW REALTEK AUDIO DRIVERPACKS RELEASED
VERSION 6.0.8769.1
  • DOLBY DIGITAL LIVE (5.1 SURROUND)
  • DTS INTERACTIVE (5.1 SURROUND)
  • A-VOLUTE NAHIMIC 3 UPDATED APO VERSION TO 3.7.6.58970
  • SOUND BLASTER CONNECT
View attachment 129678

ENJOY!!!!!

EDIT1: FOR SUCCESSFUL INSTALLATION OF UWP APPS, ACTIVATION OF SIDELOAD OR DEVELOPER MODES REQUIRED.
EDIT2: ACTIVATE THEM BEFORE BEGINNING INSTALLATION.

COMING SOON, DCHU VERSION!
Click to expand...

Hi Alan, I got into some problems and have some questions.

1.
My mic is working strangely where it, for a bit, works then starts sounding robotic and ultimately starts making high pitch noises.
Already reinstalled multiple times always having the same problem.
And when it is working, the sound that comes out is a lot lower than it was before installing.

2.
I don't know if it supposed to be like this but I have 2 controllers installed (both have the same problem I said above)
129744


3.
The realtek app (don't know how to call it) where it had Asus "skin" looked a lot nicer. Is it possible to keep that skin?

4.
Can you make so that when uninstalling (via control panel), all the apps that were installed (Nahimic, Sound Blaster Connect and Dolby Audio Premium are the only ones installed right?) are uninstalled as well?


I'm going back to the default controller and uninstalling all the things but really wanted to make it work.

Thanks in advance,
João Roda
 
Jimmy9303 said:
mega.nz

MEGA

MEGA provides free cloud storage with convenient and powerful always-on privacy. Claim your free 20GB now
mega.nz mega.nz
Click to expand...
Jimmy9303 thank you for the answer. Unfortunately, I do not know which file in this folder is the fix I want.
My problem, there is no sound in the back pair and the center speaker in 5.1 mode. (ALC88B / ALC887). Please help. Thank you.
 
Last edited:
djandy75 said:
Jimmy9303 thank you for the answer. Unfortunately, I do not know which file in this folder is the fix I want.
My problem, there is no sound in the back pair and the center speaker in 5.1 mode. (ALC88B / ALC887). Please help. Thank you.
Click to expand...
See in Realtek 4 folder in Realtek_2019_02_25.exe :)
A few pages earlier I posted an another link, from that is more mods from Alan in it.
Look further :)
 
Status
Not open for further replies.
Back
Top