• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

Status
Not open for further replies.
Guys, please inform me when the drivers will be ready for testing to the Usb based soundcards. :)
 
NiwivaN said:
Hi, it seems to work well to me, one function except very very important for me ... the bar equalizer. I can see it, but it doesn't work (if I move the sliders on the various frequencies I don't hear any sound difference). It does not work either in the new Realtek panel, or by installing the old one Realtek interface, or even the one inside the Dolby Atmos.
My Pc is an Acer SWIFT 3 SF314-41 with W10

Update: disabling Dolby Atmos, the equalizer works in Realtek Audio Console. It makes me think that the problem is also present for the DTS plugin and all the others available. can it be fixed?

I also add VERY USEFUL information! To not to go crazy 2 days like I did. When installing AAF, disable the internet connection !!! otherwise, as in my case, Windows will automatically install Realtek drivers while AAF is being installed.
Click to expand...
Update 2: Actually the equalizer of Realtek Audio Console and the one of Dolby Atmos also seem to work at the same time !.
But there is a problem: I have checked several times but the equalizer does not work with Groove Music, the windows stock player. It works instead with youtube, spotify etc ... Can this problem be fixed in the next update?
AAF Optimus said:
This, unfortunately, is impossible to instruct the installer to do. But I will include this information in the next updates.
Click to expand...
 
I formatted my PC and took the opportunity to use the latest version, tested the 2 available ones and found a bug, in iTunes/Chrome/Games everything works fine, however, for example in groove music/video player in windows/Netflix App the effects of Sound Blaster Connect doesn't work and Sonic Studio's "Smart Volume" and "Treble Boost" effect doesn't work, I use Windows 11 just like I used it in the previous version. is there anything I can do to resolve it? Thank you @AAF Optimus , you are awesome!
 
Last edited:
anyone know why my audio settings keep reverting to stereo from 7.1 with no sub or bass when i enable spatial sounds?
alc1220, windows 11, aaf latest drivers, msi gaming pro carbon b450
 
Last edited:
tarox916 said:
anyone know why my audio settings keep reverting to stereo from 7.1 with no sub or bass when i enable spatial sounds?
alc1220, windows 11, aaf latest drivers, msi gaming pro carbon b450
Click to expand...
If you are enabling Dolby Atmos or DTS-X it will do that. I think because it assumes you are using headphones. Unless you have a receiver and speaker setup that is DTS-X or Dolby Atmos ready, if so I don't know if the channel configuration matters. It should probably automatically go into that mode once it receives that content. I know on my Denon receiver I can leave it set to Stereo 96K or whatever I want for music and as soon as I play a movie the reciever detects whatever sound mode its in and switches automatically and I don't need to change it to 5.1.
If you are using any of the Dolby Digital or DTS 5.1 or 7.1 formats just select the speaker format and leave spatial alone usually. The spatial formats Atmos and DTS-X are different than Dolby Digital or DTS-HD and a lot of people get confused and think they aren't getting Dolby or DTS audio out unless they enable those, I know I had to learn myself through Google. Play some 5.1 content from Netflix or with a properly set up media player app and your receiver should switch to DTS OR DD-HD automatically. Whatever modes it suppports should show up in the audio set up tab.

Hope this helps
 
frollo said:
@Ferather thank you for the response. Can you show what you mean by editing this xml or is there already a post / vid about it? i have a dts_apo4_oem_config_1025133B.xml and when searching for SFX i get the following



the file looks huge with tons of duplication in it

I'm optical through to a z906

you also said "Is that with Interactive? Enable stereo mix, set it to play to the digital device (or default device), then mute it. This will make the encoder always on."
I'm unsure what or how you intend for that to work. In my Digital Output (SPDIF) properties default format is DTS Interactive. I do not see a stereo mix other than 2 channel 16 bit 48000hz etc. This device is set as default for the system playing directly to the z906
Click to expand...
hey does your z906 getting a "smash" sound when you mute your z906 or when you put the volume down to 0 the same strange loud noise?
 
DTS notworking
i selected dts encoder on the setup but there's no dts on my audio device or realtek console
 
NEW DCH DRIVERS RELEASED IN MEDIAFIRE
HD AUDIO DRIVER VERSION UPDATED TO 6.0.9336.1
USB AUDIO DRIVER VERSION 6.0.9600.2311
MORE DETAILS IN 1st PAGE

ATTENTION: You will need to uninstall the currently installed version before continuing with this installation. A condition has been imposed for this due to problems reported by some users.

RECOMMENDATION: Before installing this modified driver, be sure to remove any and all residues from previous Realtek audio drivers or even if there are residues from previous versions of my mods, if they persist. For this you will need the DriverStoreExplorer (by @lostindark). Remove any drivers whose vendor is "Realtek", "Dolby", "DTS", "Creative", "Alan Finotty", etc in the Sound, Video and Game Controllers, Extensions, Software Components and Audio Processing Objects categories.

Those who want only Realtek material, just choose the panel option (HDA or UAD) and deselect the rest.
Don't forget to go to the "Changes" button to check the changes of the latest version. :toast:

GO TO 1st PAGE

ENJOY!!!
 
Last edited:
Newer ones on Mediafire not working for me. No option for patched APO during installation.

Where can I get the patched APO drivers that were previously available on Github?

Trying to get Dolby Digital Live through spdif.


Strix Z390-E
S1220A
Windows 10
 
Hi Alan,
Thanks for the update,
please notice that
(01) - Application DTS:X is no longer available in this last update, (14 days Trial), and no effects available in control sound panel (DTS:X / Headphone:X). In your previous releases, it was activated and working perfectly...
2022-04-16_00-56-20.png

(02) - Application DTS Studio also not working for me (speakers not detected).

Apart from that, all others apps working simultaneously and perfectly: Dolby ATMOS / Sound Blaster 2 > 720 / Sonic Studio 3.
A real cinematic sound !! :cool:

Please keep up your good work,
Thank you again Alan.
 
jcags said:
Hi, Alan. What happened to the Github Repo? It no longer exists...
Click to expand...
Same here, I was really surprised when i found the page no longer exists :eek:, but I was quickly relieved when I visited its second page on Techpowerup.
61681636-emoji-essuie-la-sueur-avec-un-mouchoir-le-travail-acharn%C3%A9-la-chaleur-ouf-%C3%A9motion-off-the-%C3%A9motic%C3%B4ne-c.jpg
 
Status
Not open for further replies.
Back
Top