• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Your PC ATM

So my PC has changed a bit a again. Not much, but this is the final form for the next coming years. No more plans. I replaced gpu from asus tuf to one from gigabyte do to coil whine. Gigabyte is not free from coil whine, but it´s far better than the tuf card. I also replaced that ugly standart adaptor for RTX 4090 to one from Cablemod.

So this is how it looks now.
img_20221203_124405-jpg.272856

img_20221203_124447-jpg.272857

IMG_20221204_204128.jpg

IMG_20221204_204204.jpg


Because it is now christmas, i set it up theme for the mood. Gives a nice mood change to.
img_20221203_170310-jpg.272858

img_20221203_170426-jpg.272859

img_20221203_170354-jpg.272860

Pictures says something, but for the full mood a video better shows what i mean.

This is my configuration for the next comming years.
 
mechtech said:
lol oh well, nothing like a white Christmas :)
Click to expand...
Got that right, :toast: was planning to take the family to the mountains for Christmas, getting plenty of snow up there now, and they're only a short drive away.

Hope you and your family have a merry Christmas :)
 
My white FC140 that I got for 35USD arrived a week early :toast:

1DF6B5B5-CF9E-4768-8DAA-8B5B3C8A15E1.jpeg

B321E925-4095-4029-9EE8-F5403A332465.jpeg


41D6E8C8-6169-4CB1-BDA1-EB61696441A9.jpeg
 
Last edited:
new monitor came, early birthday present :D

IMG_20221207_233652.jpg
 
The parts for my 2nd gaming rig have been more or less finalized:

Gigabyte X570S Aorus Elite AX
AMD R9 3900X
2x 16GB Patriot Viper DDR4 4000MHz (will run them at 3600MHz)
Sapphire RX 6900 XT (should have the RX 7900 XTX when I get back in February, that is, assuming supply is good)
Crucial P3 Plus 500GB NVMe M.2 PCIe 4.0 4x4 (OS)
4TB Leven JS600 SATA SSD (games)
2TB Samsung 870 QVO SATA SSD (Games)
2x 1TB Samsung 860 EVO SATA SSD (games)
2TB - 4TB HDD (for downloads, movies/music) (undecided yet, from my spare HDDs collection)
Enermax MAXREVO 1500
SOLDAM Windy XR-1 Black Knight

Ofc, will be back with pics when I'm done......in February most likely.
 
My new monitor totally dwarfes the other of my old 24"s. Still waiting for the 6700 XT to arrive, my temporary GTX 970 isn't quite a 4K card.. :laugh:

RlaI6Nc.jpg
 
My PC these days...
IMG_0213(1).jpg
IMG_0214(1).JPEG
IMG_0216.JPEG
 
I lost my mind of the audio crackling with the Crosshair VII so I went back to my B550M Aorus Elite. The 6700 XT suits well with that mATX board. :)

zlxKr8Z.jpg
 
Well since I opened the panel to upgrade cpu I decided to fix gpu sag lol
 

Attachments

  • 20221210_122016_HDR.jpg
    20221210_122016_HDR.jpg
    1.4 MB · Views: 87
Easy enough to fix GPU sag, but what to do when your CPU tower cooler decide to hang out. My BeQuiet Dark Rock Pro 4 looks like shit for a while now...
 
Count von Schwalbe said:
Zip tie to the top of the case, and post in ghetto mods...
Click to expand...
Actually, I was thinking about removing the top plate cover for good, and turning the tower upside-down. Still goes to the ghetto mods though. The plate adds additional weight, and it's ugly.
 
Installed the 3 new Be Quiet! fans.

20221210_155309.jpg
 
mechtech said:
ThermalRight should give you commission or royalties or something for advertising :)
Click to expand...
I have gotten a few free items, would have been better if I had an Intel to use them on :D

A friend has a contact and has been helping me getting a new mount and crossbar for my other FC140. They sent me a couple of LGA1700 mounts and a blue and black contact frame :cool:

Would be sweet if they sent me a PS120SE to try out, its like a PA120 but with 7x 6mm pipes :toast:

They know where I live :rockout:
 
Worked on reviving/repairing my old Dawn of War Warhammer 40k case mod. New LEDs, fans and replaced an LED controller. I repaired some of the outside 3d parts as well. No PC in it at the moment, but one is coming. And yeah, the wiring is, well, a nightmare. The 7" screen on the side works, I have a video of it here. Dawn of War Mod screen.
DSC06224 copy.jpg
DSC06225copy.jpg
DSC06226copy.jpg
DSC06227 copy.jpg
DSC06228copy.jpg
DSC06229copy.jpg
DSC06232copy.jpg
DSC06234copy.jpg
 
jallenlabs said:
Worked on reviving/repairing my old Dawn of War Warhammer 40k case mod. New LEDs, fans and replaced an LED controller. I repaired some of the outside 3d parts as well. No PC in it at the moment, but one is coming. And yeah, the wiring is, well, a nightmare. The 7" screen on the side works, I have a video of it here. Dawn of War Mod screen.View attachment 273931View attachment 273932View attachment 273933View attachment 273934View attachment 273935View attachment 273936View attachment 273937View attachment 273938
Click to expand...
*vader impressive*
How many hours that take? Any 3D printing??
 
jallenlabs said:
Worked on reviving/repairing my old Dawn of War Warhammer 40k case mod. New LEDs, fans and replaced an LED controller. I repaired some of the outside 3d parts as well. No PC in it at the moment, but one is coming. And yeah, the wiring is, well, a nightmare. The 7" screen on the side works, I have a video of it here. Dawn of War Mod screen.View attachment 273931View attachment 273932View attachment 273933View attachment 273934View attachment 273935View attachment 273936View attachment 273937View attachment 273938
Click to expand...
That's some nice case mods you have there.

I can only agree with wiring. It can be a nightmare when going outside of the norm. I can relate when I build my dual system in a single case. A lot of wiring to handle. Zip ties is your best friend in cases like this.
 
Server is all clean, do not like these mesh cases. Running TrueNAS and I added a hot spare


IMG_20221211_071335961.jpg


Screenshot 2022-12-11 072516.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top