• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Phanteks NV7 is the Case You Need for Gigantic Graphics Cards and Four Radiators

No Tint on the glass? :twitch:
 
I've got a 4x120 sitting around here I'd love to use again but alas, yet to find a case.
 
I've got a 4x120 sitting around here I'd love to use again but alas, yet to find a case.
I have the phanteks Enthoo Pro 2. It can fit a 480 up front, 360 at the bottom and a 360 up top. Just make sure the top and bottom are exactly 30mm wide, like the Corsair radiators. Corsair radiators are made by Hardware Labs, so I'm sure their radiators would fit as well.
 
No Tint on the glass? :twitch:

Thank god if they have, as much as I love my Evolx X case they went way overboard on the tinted glass to the point where I could use the glass as sunglasses. Even with all the lights on 100% brightness it still looks dim.
 
Look at the bottom in the 2nd pic. What fan spacing do you see?
I don’t actually see proper fan spacing at all and, if I did, it’d be 3 tops ;)

I’m taking Phanteks word for it. Also, look at the first picture. Might just be how the fans are adjusted in the slots but doesn’t look like a fourth fan’ll fit to me. :shrug:

Only preview I could find beyond this PR but they also say 360 max, but they also say 480 on the side? Guess we’ll know when they release specs.

 
It might support 480’s, see the video above. No product page yet.
 
lets hope :D
This case is essentially the Enthoo Pro 2 reversed, for the most part. As I stated before based on the 2nd photo showing the fan spacing clearly shows support for 3x140s. When you look at the side there is a picture with 4 120mm fans installed in the side panel. Where it would be the reverse of the Pro 2 would be that the top could only support 360 rads. Like the bottom of the Pro 2.
 
I keep looking at the Enthoo Pro 2 to understand the comparison and am not seeing it. Seems like a ton of retooling was needed and this guy looks taller

Also don’t think a 420 would fit on the side panel due to the PSU and GPU placement. Idk what you’re talking about on the bottom, though — looks like three fans max to me. Maybe a 420 would fit there, but I have my doubts about a 480 :shrug:
 
I keep looking at the Enthoo Pro 2 to understand the comparison and am not seeing it. Seems like a ton of retooling was needed and this guy looks taller

Also don’t think a 420 would fit on the side panel due to the PSU and GPU placement. Idk what you’re talking about on the bottom, though — looks like three fans max to me. Maybe a 420 would fit there, but I have my doubts about a 480 :shrug:
They moved the PSU from the bottom to the top. It removed support for the 2nd ITX PC but now you can put 2 120s in that space. Then they recessed the MB tray but moved tray down as well vs the Enthoo 2.

They moved the PSU from the bottom to the top. It removed support for the 2nd ITX PC but now you can put 2 120s in that space. Then they recessed the MB tray but moved tray down as well vs the Enthoo 2.
It seems taller because there is no PSU shroud.
 
Thanks for being patronizing very compelling
 
Back
Top