Gigabyte rtx 3080 ti gaming oc no display,bios unknown in gpu z.

[josephokoth]

Hi guys.So i bought this gigabyte rtx 3080 ti from ebay for parts not working.Seller says they flashed bios which bricked the gpu.It doesnt post though fans spin and is detected in device manager while using onboard graphics.The bios version is unknown plus some other fields showingunknown/ na.Tried flashing vbios provided in TPU and after rebooting the fields still unpopulated and no display.I have attatched gpu z image,gpu serial number and device manager image.If anyone knows a fix i would appreciate.Thanks in advance

 

[Solaris17]

Did it flash successfully? What bios did you use? Did you reinstall your drivers afterwards as you should?

 

[josephokoth]

Did it flash successfully? What bios did you use? Did you reinstall your drivers afterwards as you should?

Yes it flashed successfully and upon restart the bios is still unknown in gpuz.I downloaded bios version 94.02.71.40.4C and 94.02.71.00.68 which are listed for the gaming oc model.Both flash but no fix.

 

[Solaris17]

Yes it flashed successfully and upon restart the bios is still unknown in gpuz.I downloaded bios version 94.02.71.40.4C and 94.02.71.00.68 which are listed for the gaming oc model.Both flash but no fix.

So you didn’t use ddu and clean install the drivers afterward?

 

[josephokoth]

So you didn’t use ddu and clean install the drivers afterward?

i did use ddu,disabled the 3080 ti in device manager then flashed.After reboot i enabled the gpu in device manager and install drivers.Still no change.

 

[Caring1]

Have you removed the shroud to confirm the board is as described?

 

[josephokoth]

Have you removed the shroud to confirm the board is as described?

Yes.All looks good and no burnt component visible.

 

[awkh1982]

Probably VRAM error or GPU self got issue, try looking and download MATS somewhere on network check VRAM see wherever the VRAM or GPU issue