With the 4 temperature detection sockets of the Corsair Commander PRO hub, can I skip the ICUE software and directly monitor it with AIDA64?

[Chinese player Mr. Wang]

With the 4 temperature detection sockets of the Corsair Commander PRO hub, can I skip the ICUE software and directly monitor it with AIDA64?

 

[A Computer Guy]

HWiNFO64 will read those sensors without having to install iCue

 

[INSTG8R]

Yes AIDA will read any sensor data available

 

[Chinese player Mr. Wang]

HWiNFO64 will read those sensors without having to install iCue

Ah, is that true. Are you currently using it like this

 

[INSTG8R]

Ah, is that true. Are you currently using it like this

I actually currently use AIDA to send my sensor data to my G19s LCD screem. My previous MoBo had headers for thermoisters sadly this one does not(I do miss them) In my use case AIDA gives me 6 blank pages I can put any data AIDA can read, I have multiple screens for different tasks

Here's my "GPU Screen" As you can see I have an FPS counter throught AIDA using RTSS. As I said if AIDA can read it you can monitor it. Your Thermositers should be able to show up in AIDA without needing ICue as they "should" just pass through USB I would find it quite underhanded if Corsair required software for that simple function,. If you don't have AIDA64 full and are unsure the trial version while limited should at least "show" you the sensors are picked up and readable they will probably just block the actual readings..

 

[Chinese player Mr. Wang]

Yes AIDA will read any sensor data available

Ah, is that true. Are you currently using it like this

I actually currently use AIDA to send my sensor data to my G19s LCD screem. My previous MoBo had headers for thermoisters sadly this one does not(I do miss them) In my use case AIDA gives me 6 blank pages I can put any data AIDA can read, I have multiple screens for different tasks

Here's my "GPU Screen" As you can see I have an FPS counter throught AIDA using RTSS. As I said if AIDA can read it you can monitor it. Your Thermositers should be able to show up in AIDA without needing ICue as they "should" just pass through USB I would find it quite underhanded if Corsair required software for that simple function,. If you don't have AIDA64 full and are unsure the trial version while limited should at least "show" you the sensors are picked up and readable they will probably just block the actual readings..
View attachment 406071

Hello, the AIDA64 you said transmits the temperature data to the external screen you mentioned, and I know and understand this situation. However, I would like to ask if AIDA64 and hwinfo can skip ICUE and directly monitor the temperature sensor data on the Corsair Commander PRO and display the value in the AIDA64 and hwinfo software, so that it is convenient to take a screenshot of all temperature values with one click.

 

[INSTG8R]

As I suggested D/L AIDA it will be "limited" but shoiuld show you all the detected sensors tho the actual readings may be blocked because "trial" As far as I'm concerned it should act as "passthrough" for those it's not like they need any kind of software to actually run just software to read the output

 

[A Computer Guy]

Ah, is that true. Are you currently using it like this

Yes it looks like this screenshot below in HWiNFO64. I think the rub is you need iCUE to at least set the fan curves so the Commander Pro can remember them. In total I install iCue at least temporarily to configure my devices to store the profiles in the device for the Commander, Lighting Nodes, Keyboard, and turning off the headset RGB to save battery power. After that either I will
uninstall iCue or just terminate/Close iCue and disable iCue from startup and reboot.

 

[INSTG8R]

Yes it looks like this screenshot below in HWiNFO64. I think the rub is you need iCUE to at least set the fan curves so the Commander Pro can remember them. In total I install iCue at least temporarily to configure my devices to store the profiles in the device for the Commander, Lighting Nodes, Keyboard, and turning off the headset RGB to save battery power. After that either I will
uninstall iCue or just terminate/Close iCue and disable iCue from startup and reboot.

View attachment 406161

Well that's the results I wanted to see, I don't think he cares about any fan control just access to the thermosisters for temp montioring which requires no sofrware.

 

[Chinese player Mr. Wang]

Yes it looks like this screenshot below in HWiNFO64. I think the rub is you need iCUE to at least set the fan curves so the Commander Pro can remember them. In total I install iCue at least temporarily to configure my devices to store the profiles in the device for the Commander, Lighting Nodes, Keyboard, and turning off the headset RGB to save battery power. After that either I will
uninstall iCue or just terminate/Close iCue and disable iCue from startup and reboot.

View attachment 406161

It's pretty cool when I see you have 4 temperature readings on it. Can you tell me the version number of HWiNFO64?,And paid or cracked version。 I guess, you should also be a split water cooling user and be able to take a look at your host. This is so cool, thank you for sharing the experience.

When you uninstall or turn off the ICUE, can the HWiNFO64 still read the 4 temperature values and fan speed RPM normally?

Yes it looks like this screenshot below in HWiNFO64. I think the rub is you need iCUE to at least set the fan curves so the Commander Pro can remember them. In total I install iCue at least temporarily to configure my devices to store the profiles in the device for the Commander, Lighting Nodes, Keyboard, and turning off the headset RGB to save battery power. After that either I will
uninstall iCue or just terminate/Close iCue and disable iCue from startup and reboot.

View attachment 406161

When you uninstall or turn off the ICUE, can the HWiNFO64 still read the 4 temperature values and fan speed RPM normally?

 

[A Computer Guy]

It's pretty cool when I see you have 4 temperature readings on it. Can you tell me the version number of HWiNFO64?,And paid or cracked version。 I guess, you should also be a split water cooling user and be able to take a look at your host. This is so cool, thank you for sharing the experience.

I don't have a split loop just a continuous one. You can see more about it here .

When you uninstall or turn off the ICUE, can the HWiNFO64 still read the 4 temperature values and fan speed RPM normally?

Yes.