Recent content by Hrokthar

This is when I did reset of bios, changed ram to 1600 and their voltage to 1.65. And also changed freq of CPU to 3.8Ghz only.. Was not stable.. And this figure during that test is bit strange because falling but don't know if this caused problem or what..

I did in past but voltage went up to like 1.35 for 4Ghz. So not so cool:( That's why I started lowering it.. And it was unstable with auto like this..

I am just wondering that if I will manually set Voltage to 1.2 instead of adding just +/- to offset, how will change consumption and heating. Frequency will drop in idle to 1600 but if Voltage is same, there is the same heating and same consumption as during test? Or am I wrong? I also...

Having strange situation here. Prime95 is running 3.5 hours with no error. OCCT linpack has error after 31 minutes just when CPU goes during test to idle for second time. No specific error just "error" message. The most strange is that voltage is higher in idle then in load. But as I see CPU-Z...

Guys, thanks for your advices. After playing a while with volts it seems to be stable now (running Prime95 over 3 hours with degrees under 60) with all saving utilities (TPU, etc.) enabled. Was trying to set - offset to get to around 1.2 V and now is it between 1.185-1.2 during test. Wanted to...

Hi guys, I have started to have some problems with my PC (components described bellow) recently. Sometimes restarted during playing game after I switched to automatic OC done by mainboard. So I started reading a bit about OC and did some adjustments: Let MB to do OC automatically using Asus...