Recent content by r0b3412

hello all, I downloaded elden rings and was playing and every 2 seconds game would stutter. i come to find out it is my usb eject 2.0 notification poping up in the bottom right corner of my screen. I couldnt find anything wrong with usb and everything was unplugged still having issue. I ended...

Quick over view Ok real quick before I do the 1 to 8 mod The bubble gum mod gets me "unknown spi 0/20000h " error When I take apart the bubble gum mod I don't get any error but can't flash When I originally bubble gym mod it flashed fine up until I put the wrong bios in. (...

.

the adapter is located by atiflash no need for 1+8 right? thats not the issue anymore it just wont flash even with bubble gum mod.

ihave a HIS H695FN2G2M Radeon HD 6950 2GB i tried -fa command no luck i re did the bubble gum mod.

I just took the hard mod off which allowed me to flash the first time. The proble Is now that it's off it's reading correctly again and error is gone but now I can't flash bios back to original since the hard mod is not connected anymore. So now I get Rom was not erased error 0fl01. Which I...

so i undue hard mod, flash with original bin? i dont think it will let me flash... thats why i used the hard mod to flash in first place.

any clue anyone?

so i figured out why the adapter wasnt being read. i had a nvidia card which was not reading by atiflash so it set the slot 1 to slot 0. now i have new problem when i try to flash it says unable to write unkown spi 0/20000h

you have heard of the 1 & 8 method?

i dont think so, it actually worked, i did the hard mod to flash non-reference cards. the problem was i flashed it with the wrong bios.... like an idiot. https://bitcointalk.org/index.php?topic=20634.msg289672#msg289672

i cant tellw hich chip you circled . right or left one.

same chip i did the hard mod on, i am wondering if i can do the 1 and 8 method if i am already using the 8 pin.

if i did 0 it would flash up my backup video card that i put in that slot so i could get into dos. the card wont boot thats why i put it in the 2nd pci-e so i could flash it that way. fans go on just nothing on screen.

hey guys i flashed my bios, it bricked i couldnt load on restard, i stuck the card in 2nd pci-e when i use atiflash to flash original bios, i get atiflash -unlockrom 1 "adapter not found" atiflash -f -p 1 original.bin "adapter not found" any clue? i read a thread about wizzard...