Recent content by Weffy

How to Use the CH341A Clip ON bios programmer. The Ch341A is a cheap flash programmer. It works natively in linux with most bios chips. Windows instructions can be found online, there are many different software programs and drivers. You may hear that most of these cheap boards are defective...

Don't jump BIOS pins. Get a cheap SIP programmer. CH341A 24 25 Series EEPROM Flash BIOS USB Programmer + SOIC8 Clip

Ok. So the bios chip was flashed. And verified with a clip on SIP programmer. I tried to boot every single bios in the database. Over 100. The bios chip can't be damaged if the flasher is flashing it, and verifying it multiple times. the card booted originally. But got code 43 and noticed...

Can this ruin a card? I had a working card and then flashed a bad bios to it. I then tried this method, shorting out all the combos of all the corners... Now I've since got a clip on SIP programmer, flashed to original booting BIOS back to the card... but the system doesn't post still. So ...

H5GQ8H24MJR is the memory chip. I've tried all 3 BIOS with hynix and no luck. I'm using the programmer modded to 3.3V now just to be sure. Yeah theres no sticker on the board itself, but that's a super long shot. There is a small E353 sticker on the PCI-E plug so that tells me it's likely...

Shoot I must have blown something shorting bios pins out trying to get it to POST :-/ Would that likely be the fuses? @Caring1 Last thing. Is there a way to identify the model number from the main PCB? I'm now thinking maybe someone swapped the fan assembly with the barcode along the way...

UPDATE The card is actually SKhynix memory. Please advise @Caring1 that's the last time I ever trust a seller ever. He's so full of crap IDK why people feel the need to lie when I'm so openly not caring if they killed it I just wanna know. He told me it had samsung memory for some reason.

Yes I got the one where you have to solder it up to change it from 5v to 3.3V and I'm hoping my chip is 3.3V! haha Do you have a recommendation on a programmer with a clip that supports both voltages? I purchased this one (pic) but I'm willing to buy another better one if it makes life easier.

Thanks!!!! Also do you know if this is a 5v or 3.3V bios? I'm getting a SIP Programmer, but unsure if it's 3.3v or 5v

Hello, I need the correct bios for this card. Please advise. Samsung Memory 299-4E353--030BC Please help I've tried so many bios and now it wont post but if I can find the right one I can try to short the bios chip to flash