• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Clever man overclocks his house

zekrahminator

McLovin
Joined
Jan 29, 2006
Messages
9,066 (1.28/day)
Location
My house.
Processor AMD Athlon 64 X2 4800+ Brisbane @ 2.8GHz (224x12.5, 1.425V)
Motherboard Gigabyte sumthin-or-another, it's got an nForce 430
Cooling Dual 120mm case fans front/rear, Arctic Cooling Freezer 64 Pro, Zalman VF-900 on GPU
Memory 2GB G.Skill DDR2 800
Video Card(s) Sapphire X850XT @ 580/600
Storage WD 160 GB SATA hard drive.
Display(s) Hanns G 19" widescreen, 5ms response time, 1440x900
Case Thermaltake Soprano (black with side window).
Audio Device(s) Soundblaster Live! 24 bit (paired with X-530 speakers).
Power Supply ThermalTake 430W TR2
Software XP Home SP2, can't wait for Vista SP1.
It seems that you can overclock way more than just your computer. A man in Kentucky has managed to overclock everything in his house, simply by increasing the frequency in his electric current. Inspired by the "measly" performance of all his electronics, Lance Hatler decided that 60Hz was not enough for his house. After a lot of trial and error, along with several trips to the emergency room, Hatler has managed to overclock his electrical current to 900MHz. Increasing this frequency any further caused minor fires and structural instability (no his house didn't bluescreen :p). A mere example of all this extra power is Hatler's newfound ability to shred 2x4's (large pieces of wood) in his garbage disposal. Unfortunately, due to the extreme heat output of this overclock, Hatler had to put a gigantic CPU cooler on top of his house. His house maintains a balmy 115 degrees Fahrenheit. When asked what Hatler plans to do next, he claims he will break the 1GHz barrier with the help of liquid cooling.



View at TechPowerUp Main Site
 
Last edited:
April fools...? :D
 
Last edited:
somebody doesn't have a sense of humor
 
hey this is a funny not joke!
 
Omg That's My House! ;)
 
lol thats funny
 
Actually back in the 40's most of North America ran at 50MHZ on our power supply.
 
To Quote:

Up to the '40's the iron laminations of rotors and stators of electric motors and generating equipment were poor quality and hysteresis losses were a major factor. (note how large old electric motors are compared to newer ones). Higher frequencies would have worsened the losses so up 'till then 25 Hz was common in Canada and the US.
When better steel was used for laminations, north America changed to 60 Hz about 1950, the Europeans decided 50 Hz was the cat's meow.
 
ha. ha. verry funny lol :p
 
That thing is gonna blow the roof apart and then everything else under! :roll:
 
getting sick of the April fools crap. this is a news site about hardware & gaming, not a comedy club.

stop posting s**t ppl.
 
Last edited by a moderator:
getting sick of the April fools crap. this is a news site about hardware & gaming, not a comedy club.

stop posting shit ppl.

its only been one day
you might enjoy it more if you pulled out whatever stick is currently lodged in your ass :laugh:

Since comedy = fun/entertainment
and
Gaming = fun/entertainment
comedy = gaming?

So this website must just be a news site for hardware...i guess :cool:
 
Last edited by a moderator:
its only been one day
you might enjoy it more if you pulled out whatever stick is currently lodged in your ass :laugh:

Since comedy = fun/entertainment
and
Gaming = fun/entertainment
comedy = gaming?

So this website must just be a news site for hardware...i guess :cool:

but wait....hardware is used with operating systems to run games
and since games = comedy
YAAAAAAY everythings comedy!!!!!!!!!!!!!!!!!!!

Yea its 1000000% true.... ppl need to haf fun tooo and comedy is gud fer dat...
u dont wanna live a dam serious life all da time and piss off every minute:banghead:
do u wanna be lyk dat??:banghead:
man im here fer hafin fun and learning abt hardware n things in the fun way :p :p :p :p
not lyk learnin frm prfs. in damn coll and bcome like>>>>:shadedshu
:rockout: :roll: :) have fun wid da joke:rolleyes:
 
This is the funniest April Fools post Ive ever read. When I was at work, I was telling Francis Katumba about this guy. Funny as shit. I laughed so hard I was crying. Thanks.
 
getting sick of the April fools crap. this is a news site about hardware & gaming, not a comedy club.

stop posting s**t ppl.

It's only one day a year. I think you'll survive ;) . Everybody likes to have a little fun.
 
soz, just been a shit day thats all!!!! lol

my appologies 4 taking it out on TPU!

catchas
 
Back
Top