• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Enermax Announces the Revolution DUO Series Power Supplies

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
47,675 (7.43/day)
Location
Dublin, Ireland
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard Gigabyte B550 AORUS Elite V2
Cooling DeepCool Gammax L240 V2
Memory 2x 16GB DDR4-3200
Video Card(s) Galax RTX 4070 Ti EX
Storage Samsung 990 1TB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
ENERMAX brings the dual fan PSU back to the market! REVOLUTION DUO, with 80 PLUS certification, features active ventilation for long-term system stability by adopting two patented Twister Bearing fans which create dynamic airflow with quietness. The comeback of dual-fan PSU is due to increased demand of PSU shroud cases. Although the shroud cases make users more easily to do cable management for a neat and clean build, the confined space will decrease air circulation. The ENERMAX DUOFlow design utilizes the 2nd fan to actively dissipate the hot air and make the airflow management much more effective.

REVOLUTION DUO is equipped with DUOFlow design, consisting of two ENERMAX patented Twister Bearing fans, 1* 10cm intake fan and 1* 8cm exhaust fan. Thanks to active ventilation, DUOFlow makes lower RPM of fans; the use of Twister Bearing technology also delivers a more silent cooling performance compared with regular single fan PSU .



Patented FMA technology provides extra cooling for system when need
In addition to DUOFlow design, REVOLUTION DUO is also built with patented FMA (Fan-speed Manual Adjustment) function to provide optimal cooling upon users' demand. With the default setting of FMA, two thermal-controlled Twister Bearing fans automatically adjust their speed by the system load conditions - these two fans would not spin at full speed even under full load of PSU. FMA can be activated to increase the speed of both fans simultaneously to full spinning on the basis of FMA default setting. FMA, in other words, is a turbo switch of REVOLUTION DUO to offer users turbo airflow and extra cooling .

Availability & More Product Info
REVOLUTION DUO complies with 80 PLUS Gold level standards and meets 2013 ErP Lot 6 regulations; with up to 92% efficiency in operation and less than 0.5W power consumption in standby mode. It also has comprehensive protection circuitry of OVP, UVP, OPP, OCP (+3.3V/+5V), SCP & SIP for system safety. REVOLUTION DUO is available with 3 wattages: 700W/600W/500W.

For more information, visit the product pages of the 500W, 600W, and 700W variants.

View at TechPowerUp Main Site
 
"...delivers a more silent cooling performance compared with regular single fan PSU " - so two smaller fans are better than one big o_O.... yea, right - I am on my way to toss out my 140mm case fans and change them to x2 92mm
 
2004 called they want their powersupply design back :/
 
My old Galaxy had the same anno 2008...
 
my ax1200i 140mm fan is already very silent, and it's a single fan.
i don't thing 2 fan will have the same noise level. probably gonna be louder.

i think, CMIIW, a 100mm fan will have to spin faster to achieve the same airflow like a 140mm fan.
and this 100mm-80mm duo fan setup, to get the best balanced airflow, the exhaust 80mm fan will need to have the same airflow like it's 100mm fan, so 80mm will probably have to spin faster then the 100mm too.
 
You make quiet PSU by giving it fan with FDB fan which runs at ridiculously low RPM. Like the Corsair I've modded with my own fan. Or like current BeQuiet Dark Power which has that out of the box. The fan is so quiet you can't even hear it even when you lean your ear right next to it. That's how you make it quieter, not by sticking more smaller fans into it. With fans so quiet you don't even need passive mode when in idle. And since it's FDB fan you don't even care if it's running 24/7.
Also, I've had a Twister bearing fan and it's not exactly the quietest thing...
 
Awesome, it's about time a decent manufacturer started making dual fan PSUs again.

For those who don't see the point, it means you can replace the PSUs in older systems that don't have support for case fans, it means you can build systems without case fans, etc. And OFC it means better cooling for the PSU.
 
I think my elderly Athenapower SFX PSU (~2007) has a much better blow-through design with 2x fans in push-pull configuration.
 
Enermax used to be a household name.
They used to make cool and advanced products.

Now they mostly make 30$ cases and other embarrassing low end products
 
2004 called they want their powersupply design back :/

Thought the same. Seriously - how did a solution ditched 10 years ago for not being good enough become the next big thing?
 
Or you buy a Seasonic with Hybrid Fan Control.
 
Awesome, it's about time a decent manufacturer started making dual fan PSUs again.

For those who don't see the point, it means you can replace the PSUs in older systems that don't have support for case fans, it means you can build systems without case fans, etc. And OFC it means better cooling for the PSU.

Your not going to spend this kind of money for an older system that cannot even support case fans.

And any decent PSU with one single large fan would just increase the RPM if it gets hot, such as a system with no fans, to compensate. While more than likely being quieter than this.

It's a pointless system.
 
Reminds me of those old crappy overrated PSUs that needed the top fan for spot cooling those components that were clearly not up to the task of delivering what was asked of them. :ohwell: Not that I'm saying that this is why it has it, because Enermax doesn't do that. But it just brings out those bad vibes from the olden days, hehe.
 
that dual fan psu reminds me the older 430w TR2 i had.... loved that psu, despite being ultra noisy,

Regards,
 
that dual fan psu reminds me the older 430w TR2 i had.... loved that psu, despite being ultra noisy,

Regards,

Those powersupplies are some of the worst rated things Thermaltake has ever released...
 
Those powersupplies are some of the worst rated things Thermaltake has ever released...
that "thing" lasted with my several years, worked on 2 epic rigs i had and still in use on a download machine from a friend... cannot complain about that PSU, for that time i rarely remember 80+ units...

Regards,
 
that "thing" lasted with my several years, worked on 2 epic rigs i had and still in use on a download machine from a friend... cannot complain about that PSU, for that time i rarely remember 80+ units...

Regards,

Still nothing more than a junk rebadged 350w group regulated shitbox.
 
that "thing" lasted with my several years, worked on 2 epic rigs i had and still in use on a download machine from a friend... cannot complain about that PSU, for that time i rarely remember 80+ units...

Regards,

Judging on the reviews, you've been so lucky!
 
Still nothing more than a junk rebadged 350w group regulated shitbox.
ok ...

Judging on the reviews, you've been so lucky!
seems like it! but dunno, for that time i had mine, 3 of my friends had the same psu, worked great for everyone!

Regards,
 
Low wattage systems would work absolutely fine on it.
 
6a01053596fb28970c0120a5bfa4b1970c-320wi
 
well.. 80mm fan spinning a 2k rpm ( at turbo mode ) is silent-near silent.. more different could be the 100mm fan spinning at 1400 rpm.. but i don't think that it will be more noisy than ANY Seasonic unit pulled under heavy condition..

about dual fan.. what it matter for me is: a) inside temperature of the hottestest component ( less than 90°C or the psu will fail soon ), b) efficiency c) noise ( less than 40dB under heavy condition and less than 37dB in standard environment ) d) caps ( CapXon? no thx!, 85°C caps? only in budget psu ) e) price

waiting for a good review :-D
 
Back
Top