• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Inno3D Releases Two P106-090 768 CUDA Core Mining Cards

Joined
Mar 11, 2009
Messages
1,778 (0.30/day)
Location
Little Rock, AR
System Name Gamer
Processor AMD Ryzen 3700x
Motherboard AsRock B550 Phantom Gaming ITX/AX
Memory 32GB
Video Card(s) ASRock Radeon RX 6800 XT Phantom Gaming D
Case Phanteks Eclipse P200A D-RGB
Power Supply 800w CM
Mouse Corsair M65 Pro
Software Windows 10 Pro
Hong Kong video card manufacturer Inno3D has launched two models of a new crypto currency mining card under the P106-090 name. The smaller of the two, featuring a reduced board size and a single heat sink fan, is known as the P106-090 3GB Compact, while the larger of the two features dual fans and is known as the P106-090 3GB Twin X2. These cards are based on the NVIDIA GeForce GTX 1060 design, much like their bigger brothers the GP106-100 mining cards, but with some disabled CUDA cores to reduce power consumption. Both models will feature 768 CUDA cores, compared to the GP106-100's 1280. This means the CUDA core count is on par with the GeForce GTX 1050 Ti, but will retain the 192-bit memory bus of the 1060 design. This should enhance mining performance, as most crypto currency mining operations benefit greatly from increased memory bandwidth.

As the names suggest, both models will also feature only three gigabytes of GDDR5 memory, an interesting decision considering that many miners shy away from GPUs with less than four gigabytes of memory due to concerns that some currencies' DAG (Directed Acyclic Graph) size will reach over three gigabytes some time in the near future. The cards feature a TDP of just 75 Watts, much lower than the GP106-100 cards. Theoretically this would allow them to be powered exclusively by the PCI Express slot, though that would be hitting the peak power draw for PCI Express. Most miners will be using riser cables or boards anyway, making the external 6-pin power connector a necessity. This is still a relatively low power draw for such a card, especially compared to the P106-100 mining cards which command a TDP of 120 Watts, and should aid in mining efficiency. A 1354 MHz base clock with a boost clock of 1531 MHz, with a memory clock of 8000 MHz round out the specs for both cards.





Of course, these are dedicated crypto currency mining cards. They do not have any display outputs, and cannot be used for gaming. This limits resale value once the cards become obsolete for mining, though they should remain profitable for some time providing the crypto market remains steady. However, removing the video output requirement makes manufacturing simpler, and should result in a lower cost of entry than similar gaming-capable GPUs. Also of note, these cards will come with only a limited three-month warranty.

View at TechPowerUp Main Site
 
Last edited:
Card makers need to understand that miners dont want that. They want cards they can sell later.
 
Card makers need to understand that miners dont want that. They want cards they can sell later.

Not really, most miners will use a card until it fails or becomes obsolete, at which point it will be worthless.

To put it in perspective my last functional HD5870 from the original Bitcoin mining rig is currently mining Burstcoin, when it fails it will go in the bin as it's actually worth less now than a replacement fan.
 
Card makers need to understand that miners dont want that. They want cards they can sell later.

Pretty sure they just want cards , with or without video-out ports.
 
Pretty sure prices will be higher than regular products and with lower CUDA cores, possibly not more than 1 year warranties, 3GB poorly suitable for rendering purposes (in case of mining obsolete)... DOA
I would buy such "product" only if:
- single slot design (KFA offered Katana series of Pascal)
- at least 1 video output DVI or DP
- lower price than full featured boards (don't treat it as professional or "business" instrument, too weak)
- normal 2-3 year warranties (dear manufacturers just stop using shit fans in your your products, that is a main reason for returning products after just 2-3 months, because they can't sustain 60+% RPM for longer than that time, the second is - shit thermal pads with corrosive liquid which damages boards in case of prolonged "overheating", i mean 65-70C isn't such a bad or dangerous temperature for electronics, look at power amps, they usually working near 100C for years)
 
These should be made in MXM form factor, 50W TDP, undervolted to 0.85V, memory 1.15V too.
Specialized water cooled platform with integrated CPU/DDR4 supporting 20 of them at once.
Mining eth is pretty much over now, difficulty rising. At some point the proofs will exceed the fools.
 
These should be made in MXM form factor, 50W TDP, undervolted to 0.85V, memory 1.15V too.
Specialized water cooled platform with integrated CPU/DDR4 supporting 20 of them at once.
Mining eth is pretty much over now, difficulty rising. At some point the proofs will exceed the fools.

Price is like a major thing. None of what you said would be cheap.

For $70-$80 , those cards will be sold like hot cakes.

Expect $130 price points
 
Back
Top