• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Intel Adds More L3 Cache to Its Tiger Lake CPUs

Need a screen shot of load temps.

FX is not limited by anything except temperatures.
If you can cool it, it'll clock higher.
 
ShrimpBrime said:
Need a screen shot of load temps.

FX is not limited by anything except temperatures.
If you can cool it, it'll clock higher.
Click to expand...

Perhaps its why mine maxes at 5.0, and it crashes at 5.1+ volts are 1.476 under blender 1.524
 
Fx-9590 max turbo pstate is 1.5250v for single core boost 5ghz. Thats about what it takes for most FX chips depending on leakage.

Nominal temp at 5ghz and 1.5v++ would be under 50c at load.

The higher the clocks, the colder you go.

I have lots of example screen shots of different temps and cooling of various FX chips.
The high leakers like FX 9590 respond well to cool water delta. Think my max was 5.6ghz on geothermal loop. Cheating with cutting cores does help too.
 
ShrimpBrime said:
Need a screen shot of load temps.
Click to expand...

9ce052ac31.png

cooler-
0737174d75.png

If you can cool it, it'll clock higher.
Click to expand...

it dont, when I go above 4400, 4500 for example (using multiplier), computer goes to bsod or freeze forever until reboot

b0d37e2600.png


b504b97460.png

1806e139c5.png
 
Last edited:
Try 1.4250 vcore and increase LLC to 2nd to highest setting.
 
For the CPU. The LLC prevents v-core drooping during loads.

CPU/NB is IMC or Integrated memory controller.
 
ShrimpBrime said:
Fx-9590 max turbo pstate is 1.5250v for single core boost 5ghz. Thats about what it takes for most FX chips depending on leakage.

Nominal temp at 5ghz and 1.5v++ would be under 50c at load.

The higher the clocks, the colder you go.

I have lots of example screen shots of different temps and cooling of various FX chips.
The high leakers like FX 9590 respond well to cool water delta. Think my max was 5.6ghz on geothermal loop. Cheating with cutting cores does help too.
Click to expand...

All modules are enabled on my chip, 5.0 24/7. No turbo lol
 
That was like a shocked question!

Usually an air cooler on FX at 5ghz just isnt doable. Your chip must be a low leaker.
 
ShrimpBrime said:
That was like a shocked question!

Usually an air cooler on FX at 5ghz just isnt doable. Your chip must be a low leaker.
Click to expand...

8350. Retail box too at microcenter or frys at the time
 
You must log in or register to reply here.
Back
Top