Intel Adds More L3 Cache to Its Tiger Lake CPUs

[Deleted member 185158]

Need a screen shot of load temps.

FX is not limited by anything except temperatures.
If you can cool it, it'll clock higher.

 

[eidairaman1]

Need a screen shot of load temps.

FX is not limited by anything except temperatures.
If you can cool it, it'll clock higher.

Perhaps its why mine maxes at 5.0, and it crashes at 5.1+ volts are 1.476 under blender 1.524

 

[Deleted member 185158]

Fx-9590 max turbo pstate is 1.5250v for single core boost 5ghz. Thats about what it takes for most FX chips depending on leakage.

Nominal temp at 5ghz and 1.5v++ would be under 50c at load.

The higher the clocks, the colder you go.

I have lots of example screen shots of different temps and cooling of various FX chips.
The high leakers like FX 9590 respond well to cool water delta. Think my max was 5.6ghz on geothermal loop. Cheating with cutting cores does help too.

 

[yovi]

Need a screen shot of load temps.

cooler-

If you can cool it, it'll clock higher.

it dont, when I go above 4400, 4500 for example (using multiplier), computer goes to bsod or freeze forever until reboot

 

[Deleted member 185158]

Try 1.4250 vcore and increase LLC to 2nd to highest setting.

 

[yovi]

ry 1.4250 vcore and increase LLC to 2nd to highest setting.

CPU LLC?

 

[Deleted member 185158]

Yes load line calibration. LLC for short.

 

[yovi]

Yes load line calibration. LLC for short.

I mean CPU/NB LLC exists too. Which one

 

[Deleted member 185158]

For the CPU. The LLC prevents v-core drooping during loads.

CPU/NB is IMC or Integrated memory controller.

 

[HenrySomeone]

Need a screen shot of load temps.

FX is not limited by anything except temperatures.
If you can cool it, it'll clock higher.

Unfortunately, even at 6Ghz+, they still suck, while guzzling as much juice as a literal space heater

 

[eidairaman1]

Fx-9590 max turbo pstate is 1.5250v for single core boost 5ghz. Thats about what it takes for most FX chips depending on leakage.

Nominal temp at 5ghz and 1.5v++ would be under 50c at load.

The higher the clocks, the colder you go.

I have lots of example screen shots of different temps and cooling of various FX chips.
The high leakers like FX 9590 respond well to cool water delta. Think my max was 5.6ghz on geothermal loop. Cheating with cutting cores does help too.

All modules are enabled on my chip, 5.0 24/7. No turbo lol

 

[Deleted member 185158]

Yours is decent, you keep it cool running.

 

[eidairaman1]

Yours is decent, you keep it cool running.

Not bad for a cooler that doesnt block the ram slots.

55 in gaming at worst 75 on blender

 

[Deleted member 185158]

Thats on air cooling?

 

[eidairaman1]

Thats on air cooling?

Yes

https://www.techpowerup.com/forums/members/eidairaman1.40556/#specs

 

[Deleted member 185158]

That was like a shocked question!

Usually an air cooler on FX at 5ghz just isnt doable. Your chip must be a low leaker.

 

[eidairaman1]

That was like a shocked question!

Usually an air cooler on FX at 5ghz just isnt doable. Your chip must be a low leaker.

8350. Retail box too at microcenter or frys at the time

 

[Deleted member 185158]

My 8370E was cool running too. Miss that chip, was very decent.